QX09 Family of Pegboard Shelves by Jonquilmusic

Last crawled date: 3 years, 1 month ago

QX09a Pegboard Hardware that incorporates the QX08 Family of Pegboard Hooks.
This is another entry into my growing PEGBOARD MADNESS collection of designs. There are more designs being worked out, so come back later!
This shelf has 0.4” (10.16mm) Diameter holes sufficient for typical screwdrivers. The design requires the QX08b or Qx08c “VersaDaptors” from my other shares to Thingiverse. The design can be used for the top or bottom shelf.
---Hooks at http://www.thingiverse.com/thing:2121923
I have included STEP files of the objects so that you can easily import them into most cad programs and modify/adapt or create innovative storage solutions that you can use and contribute to the 3D community.
This STL was sliced and coded using ReplicatorG employing 1 shell (2 total) and 10% Infill using PLA.
No Rafts or Supports!
FlashForge Creator Pro (Similar to Makerbot Replicator 2)
Heated Bed 45 Celsius (Heated Bed not required, but I have good luck with a little warmth!)
Blue Painters Tape on bed, no further treatment
Print Temperature 220 degrees Celsius
Feedrate 40 mm/s
Travel Feedrate 55
(If anybody has more optimum feedrates, please share!)
REQUEST: Please help me improve my sharing! STEP files have proven reliable for me to transport file between different CAD platforms. If STEPs are a problem for you, please let me know what other common and relatively generic Cad format works better for you.
ADDS:
02/19/17 __ QX09b Shelf: For use with the QX08d (see “QX08” family of Pegboard Hooks)