3d_export

$35

chevrolet camaro

....be/lmzh_hau_ck - has a standard topology -uv is suitable - texture created in substance pinter software -obj, fbx, texture files

3dfindit

free

Embedded Accelerometers

...embedded accelerometers 3dfind.it catalog: te connectivity

thingiverse

free

Accelerometer Case by lakephall

...celerometer sensor face-down. the tabs on the side are meant to allow for half-inch hook and loop straps to hold down the sensor.

thingiverse

free

WIMUv3 Accelerometer Calibration Fixture by M_G

... be placed in a known position on the test apparatus to aid in the repeatable calibration of said accelerometer containing device

thingiverse

free

U-Bracket for GDX Accelerometer by vernier

...ernier thingiverse this bracket is used with the gdx accelerometer. this bracket is designed to be used with a 1/4-20 screw/nut.

thingiverse

free

3D printed MEMS accelerometer by adamweld

... the device was envisioned to be simple and easy to understand while using the same operating principles as a mems accelerometer.

thingiverse

free

Tube Plate for GDX accelerometer by vernier

...be plate is used to mount the gdx accelerometer. this plate (and the accompanying bracket) are designed around 1/4-20 fasteners.

thingiverse

free

Gyroscope / Accelerometer Mount by dgngdn

...ace by two nuts. the end is flexible so as to allow the mount to clip on a cylindrical object with outside diameter of about 8mm.

thingiverse

free

Box for gyro accelerometer board by robsteele

...by andy mark. it will require tapping 4 holes for #4 screws. the top parts has a hold for a 10-24 screw for holding the box down.

thingiverse

free

Donkeycar GY-521 accelerometer and gyro support

...his one:https://fr.aliexpress.com/item/1028067742.html probably not the best. need a super quiet (stable with no spike) power in.

thingiverse

free

Circular Motion Platform: Accelerometer Device 3D housing by SidiVerse

...erse this is the 3d housing for an accelerometer device (powered by arduino) that is used for a stem project on circular motion.

thingiverse

free

Accelerometer mount for bicycle by Nigel

...cceleration measurement of up to 6g. the only thing missing is a sturdy bracket to mount the accelerometer to the bike frame...

thingiverse

free

BITalino Accelerometer (ACC) Sensor Housing by BEE Very Creative by BITalinoWorld

...bitalino accelerometer (acc) sensor (http://www.bitalino.com) by andré magro from bee very creative (https://beeverycreative.com)

thingiverse

free

gesture controlled robot using accelerometer by berasukanta

...d www.facebook.com/learning arduino projects. and subscribe our channel to stay tuned with us and likes also..do comment in inbox

thingiverse

free

Support to calibrate accelerometer/gyroscope MPU6050 (GY-521) by Minguz

...yin to have the center of the sensor in the center of the support. at this point you can tilt it at 45/90 degree in the two axis.

thingiverse

free

Hypercube Evo Ngen - Support for ADXL345 Accelerometer sensor by bouffffi7

...nances.html acceleromter axis are not corresponding to printer axis, but according to klipper documentation this is not an issue.

blendswap

free

Arduino & Accelerometer Connection

...ct with an accelerometerexample:http://www.youtube.com/watch?v=4gmbtceh554latest change on 2013/02/28, 12:47:55add a youtube link

thingiverse

free

Accelerometer Calibration Fixture for WIMUv3 by M_G

...prints a wimu holder for calibrating a packaged wimuv3's accelerometers on the calibration turntable version: 2.0 date: 2011-08-23 to...

thingiverse

free

Model of a gyro/accelerometer board (AM 2067) sold by Andy-Mark by robsteele

...accelerometer i created this model of the part. i modeled the pins as blocks, rather than pins, which i thought would just brake.

thingiverse

free

Mount for MinIMU-9 V2 , Accelerometer, and Compass (L3G4200D and LSM303DLM Carrier) by buwprinter

.... it fits in pretty tight but can also be fixed with an addional screw. prints just fine without support or raft 10% infill.

thingiverse

free

Longboard Pro Trinket + Accelerometer Mount by JoshuAc00k

...15): i have actually printed this version out and am using it for my project. it printed fine and nothing has sheared to snapped.

thingiverse

free

PASCO PS-3223 Accelerometer Tube Caddy (3" ID) by aksnowjunky

...ube. i will add some design updates later. i intend to add some screw mounts and a better rtv seal groove for water applications.

thingiverse

free

Rostock Max Accelerometer Board Mount for 713Maker Hotend by DodgeDerek

...ne. the part is held on to the hot end mount with the regular bolts for it and some 8mm m3 bolts to attach the board to the part.

thingiverse

free

LabRadar Accelerometer Trigger + Picatinny Mount by Obsessed

... petg, but i assume pla or pla+ would be plenty strong enough. the velcro strap bridge would certainly turn out better with pla.

thingiverse

free

Accelerometer brake controller by dbcoop

...and wiring diagrams to follow. this project is relatively inexpensive and versatile for everything from your atv to your bicycle.

thingiverse

free

Accelerometer Housing for GY-61 ADXL335 Accelerometer Analogue Board by bathrobotics

... maybe track this with a usb oscilloscope we have. that'll be sweet! all the best, eur ing andy southern bath robotics.

thingiverse

free

D1M BLOCK - ADXL345 (custom Accelerometer) block by IOT123

...ring, and 2 off 8 pin 10mm long needle female pin header strip are required for this build. instructions code examples d1m blocks

thingiverse

free

D1M BLOCK - GY521 (custom Gyroscope/Accelerometer) block by IOT123

...ring, and 2 off 8 pin 10mm long needle female pin header strip are required for this build. instructions code examples d1m blocks

thingiverse

free

Prometheus Mount for SeeMeCNC Rostock Ball Joint Platform +/- Accelerometer Option by slonold

...ive to the clamp plate like a clam shell. be sure to seat bowden tube and insert ptc retainer before mounting accelerometer board

thingiverse

free

self balancing robot using mpu6050 accelerometer by berasukanta

...get to subscribe in you tube and likes also.and do comment in inboxalao you follow in www.facebook.com/learning arduino projects.

thingiverse

free

Adafruit LIS3DH 2809 accelerometer mount for Caribou Bondtech BMG carriage by JenPet

...you print this mount). it is designed for the adafruit lis3dh 2809 accelerometer. you need 4x m2,5x10 screws and 2x m3x30 screws.

thingiverse

free

GY-61 ADXL335 Accelerometer Analogue Board Model (DON'T PRINT!) by bathrobotics

... can be found at:http://www.thingiverse.com/thing:662505 please don't waste filament printing this. -andy southern, ceng.

thingiverse

free

MoleBox: 3D accelerometer and 3D magnetometer LSM303DLHC by ToFe

... (adafruit's lsm303) lsm303dlhc data sheet (pdf) lsm303dlhc module (aliexpress)more info on e-mole molebox page (czech only).

thingiverse

free

WAV3_BOT Gauntlet by VigneshRajmohan

...the wav3_bot gauntlet (this model) allows for the application of an accelerometer and the feeling of extension through the robot.

thingiverse

free

MPU 9250/6500 case by buildbysammie

...0/6500 accelerometer. it has graph axis arrows on its top side so you can see them when the mpu is in the case. hope you like it!

thingiverse

free

MPU6050 Joystick by filipeflop

...filipeflop thingiverse a joystick for mpu6050 accelerometer. note: the fitting is not so perfect but it worked for the purpose.

thingiverse

free

ArduinoAcceleromteterCase by lakephall

... by lakephall thingiverse case meant for use in tandem with an arduino with a custom accelerometer header for a pltw edd project

thingiverse

free

Voron v0 ADXL345 Mount by VBXNwi3mk3s

...s://ja.aliexpress.com/item/32831977529.html) compression fixation : three m2x8mm screws. accelerometer fixed : two m2x6mm screws

thingiverse

free

Spring Joystick Head (slightly tilted) by RobinBa

... joystick head (slightly tilted) by robinba thingiverse modified 3d model for spring joystick head with space for accelerometer.

thingiverse

free

F450 Top Platform Bracket by Reefwing

...t by reefwing thingiverse a mounting bracket to allow a gyro/accelerometer to be mounted on the top bracket of an f450 airframe.

thingiverse

free

ADXL345 mount for Hypercube Evolution Fusion by LazaroFilm

...tion fusion by lazarofilm thingiverse mount the accelerometer to the top of the carriage to use with klipper's input shaper.

thingiverse

free

AX3 Watch fixation on dog collar by Klodeko

... on dog collar by klodeko thingiverse fixation of an ax3 watch accelerometer (http://axivity.com/) on a dog collar of 23mm x 3mm

thingiverse

free

Whoop Calibration Platform by erkark

...alibration platform by erkark thingiverse i can't find angled usb cable so this is my solution for accelerometer calibration

thingiverse

free

Case for KX022-1020 from ROHM Sensor Evaluation Kit by jgromes

...20 from rohm sensor evaluation kit by jgromes thingiverse case for kx022-1020 accelerometer from the rohm sensor evaluation kit.

thingiverse

free

Ambasat2 Space flight simulator by pe1mew

...nted @ambasat2 sprite satellite space-flight-simulator for software testing of the gyroscope, accelerometer, magnetometer sensor.

thingiverse

free

Gyro Stabilizer by sluddani

...zer. goal is to eventually print a stabilizer to go in a rocket. an accelerometer will sit in bottom and record height of rocket.

thingiverse

free

Steering Wheel by tinkerkit

...e usb controller project featured in the tinkerkit! video. just place the accelerometer module in the small hole in the middle.

thingiverse

free

Crabby Cap Zesty Nimble SeeMeCNC HE280/Accelerometer Mount by slonold

... the ptfe tube should contact the bottom of the filament guide on centre without distortion. re-trim the ptfe tube if necessary.

thingiverse

free

ColorCube by ZGZMakerSpace

...the top and switch on the led stripe. documentation in github with electronic montage. https://github.com/zgzmakerspace/colordice

thingiverse

free

Tennis Racquet V2 by johntoth

...ter, gyroscope, piezoelectric sensor at the top near the head of the racquet to help with tracking shots and to improve gameplay.

thingiverse

free

Rocket capsule with parachute deployment mecanism by leoyanis

...do it. https://youtu.be/xz90klmukji print settings: 100% infill 4 peremiters i used pla higher temp better for more robust print

thingiverse

free

Enchanted Thor Hammer by mvipin

...r and a few 3d printed parts.https://youtu.be/sjuxsgpo8pq build instructions and other details:https://hackaday.io/project/177208

thingiverse

free

RoaDuino 1.0 by Elraulito

...e, just download everything and watch the video for more details. the microcontroller is arduino mini pro with 2kb of ram memory.

thingiverse

free

Nimble Gnu - System to Adapt the Zesty Nimble Extruder to a Prometheus V2 Hotend Mounted to a SeeMeCNC Balljoint Effector Platform with Accelerometer Probe PCB by slonold

...ter, strap down the whip. remember to revisit your slicer retraction settings. it is a whole new world without the bowden tube.

thingiverse

free

ADXL345 E3D V6 Nozzle Mount (optimized for Voron Afterburner) by tzeman

... mount for e3d v6 hotends. optimized for voron afterburner hotend. f3d/step attached. https://www.youtube.com/watch?v=19lhy6qos8w

thingiverse

free

Dodecahedral Protoboard by mrule

...roducts/8847 ideas : dodecahedral lights-out interactive accelerometer controlled led object just assemble and gaze at its beauty

thingiverse

free

MX MIDI Guitar

....com/mx-midi-guitar/ code on githubhttps://github.com/adafruit/adafruit_learning_system_guides/blob/master/mx_midi_guitar/code.py

thingiverse

free

Phidget Cases by Razor2000

... 8x8x8 main board ir distance sensor accelerometer cases have been uploaded with both a screw mount and a split pin mount

thingiverse

free

MPU-6050 Pin Header Soldering Jig by seanhodgins

...thingiverse i had to solder headers on 100 mpu-6050 accelerometers so i quickly made this jig to hold them...

thingiverse

free

Robot Control Unit by ebaera

...ngiverse.com/thing:795088) gyro/accelerometer/gesture sensor/4 motor drivers/charger/8 rgb leds/bluetooth/atmaga328 are on board.

thingiverse

free

VortexPro250 Cam_Skid by Oxyo

...bration, 7mm deeper to protect my cam connector like picture. you can find the front crach kit in my own things enjoy it :) v.1.1

thingiverse

free

HE280 cable locking clip by mattster98

...llides with a few small components on the board, but it doesn't appear to be an issue yet. might resolve in a later version.

thingiverse

free

Rostock Max V3 - E3D Hotend Platform by Terefenko

...ll produce some enhancements like better fan mounts or an led light ring as done by djkirkendall. design suggestion are welcome.

thingiverse

free

BodWiiRius FPV Quadcopter by Ilkirius

...r gps : $ return to home $ follow way points first person view camera ccd sony fat shark dominator glasses

thingiverse

free

Decked out Rocket (video added) by sluddani

...unch video:http://youtu.be/qeukx9spbbu rocket was designed by eric smith (the man, the myth) and dan sluder (the science tutor)

thingiverse

free

PixelXLtemplate by ShuttleSpace

....com/app/single/58a858c6a2717f0d618f940d/58a85a45a2717f0d618f9412 view this on your android, uses the accelerometer, new ideas...

thingiverse

free

Diatone Crusader GT2 200 by sharpshooter441

...l your accelerometer. stand also helps to store it on. hope you enjoy.. thanks! ( please leave your comments and feedback below )

thingiverse

free

Voron V0 ADXL345 mount by smolboi

...n't work with the mosquito's 25mm fan) make sure to leave the front door open or the pins will jam into it while homing.

thingiverse

free

ADXL345_mount by jpndk

...ww.ebay.com/itm/1pcs-gy-291-adxl345-iic-spi-module-free-shipping/283911472614 https://www.klipper3d.org/measuring_resonances.html

thingiverse

free

Helmet Shell Version 2 by egzastrow

...g. we also added a hole for the wires to be fed through from the accelerometer that is in the helmet to the arduino in the shell.

thingiverse

free

Xiaomi Yi Gimbal Mount by ahuddart

...n immersion rc xugong 8 but other gopro based gimbal parts should be compatible . imu mount for use with mpu-6050 accelerometer.

thingiverse

free

Persitance of Vision Display Case

...erometer, 9v battery, and an arduino uno. see the full build of this project on my website: http://tristanluther.com/projects/pov

thingiverse

free

Interactive Lighted Companion Cube by MachineKing

... and a 6dof accelerometer and gyroscope combination. here is a video of it in action: https://www.youtube.com/watch?v=ybn_qe1dk4k

thingiverse

free

Arduino Nano RC Transmitter by AlxUta

... two joysticks two potentiometers two toggle switches six buttons ( two from the joysticks ) accelerometer and a gyroscope sensor

thingiverse

free

ADXL345 bracket for Ender gantry by MathiasM74

... material thickness). using the screw hole to secure it to the gantry is optional (and will likely leave a mark). takes m3 bolts.

thingiverse

free

Mini naze cover by ixxe

...ortex-m3-cpu-mpu6050-accelerometer-p-1017486.html different tops covers for angled and straight pins. tell me if it works for you

thingiverse

free

65mm Quad work/launch stand

...friction it would work. honestly it's over built for its use. but it's modeled after the launch stands we use for races.

thingiverse

free

WunderBar 3D printable casing by relayr

...ure, humidity, remote control (ir), accelerometer, and gyroscope, a grove connector, and one public sensor chosen by the backers.

thingiverse

free

ADXL345 mount for Flsun Q5 Klipper calibration by alexeyzel

...without supports. be sure the screws don't touch components on the circuit board when mounting. you need really short screws.

thingiverse

free

Adafruit Stemma QT sensor case by Lubarb

... the side and the boards snap into place. the cover press/friction fits. i printed it in petg, but that shouldn't be critical

thingiverse

free

Arduino Shield Case for ROHM Sensor Evaluation Kit by jgromes

... the stability of sensors like accelerometer or magnetometer, each of the sensors can also be mounted with 2 additional m3 bolts.

thingiverse

free

Biped Robot Mk II by pablocawen

...scope e-max es08mdii watch:https://youtu.be/8atsvegm6xkhttps://youtu.be/_6-xyamqeb0 if you like the project please consider a tip

thingiverse

free

3DR Solo Legs by lanceb

...and low infill, so it's kind of crappy. i'm using simple hot glue to hold ants in place. still fits in the bag. have fun.

thingiverse

free

Light satellite antenna rotator for camera stand by jsalin

...program to automatically point and track the antenna to a satellite of choice automatically, using gps and accelerometer modules.

thingiverse

free

Small Humanoid Robot by ebaera

...lated project "space vehicles"http://www.thingiverse.com/thing:795088 these projects are for maker faire bay area 2015.

thingiverse

free

ADXL345 Adapter for Remixed Tech2C E3Dv6 Mount Clamp Remix by adolson

...link: https://www.thingiverse.com/thing:4887212 why would you want this? if you don't already know, you don't need it. ;)

thingiverse

free

LED Matrix Sand Toy by adafruit

...wo buttons make it easy to switch modes or reset simulations! read the full guide on: https://learn.adafruit.com/matrix-led-sand/

thingiverse

free

Caterpillar robot by larmesto

...https://www.youtube.com/watch?v=xa0gqnfn5iwhttps://www.youtube.com/watch?v=ah7ldpcamgohttps://www.youtube.com/watch?v=sbuemfzbtoe

thingiverse

free

E3D V6 Hotend Mount for Rostock Max V3 & Orion Deltas by Resinseer

...m seemecnc. big thanks to those of you who have found this thing useful and have sent tips to me, they are very much appreciated.

thingiverse

free

GY-521 hand worn enclosure by izash

... yaw axis. i 3d printed an enclosure for the gy-521 and i wear it like a watch using 2 velcro cable ties. the pcb files are here.

thingiverse

free

ADXL345 mount for Artillery Genius / Sidewinder X1 by aapalo

...ru x1_svandru_adxl.stl sidewinder x1 hara74 x1_hara74_adxl.stl see my github for more info and files (including the adxl.scad).

thingiverse

free

Motor levelling mounts for Banggood Falcon 250/Pro by AndrewFromOz

... in the air. i'll design some horizontal, transparent motor holders with led pockets for the falcon 250 pro when i have time.

thingiverse

free

Rostock Max V3 LED ring mounts by Noircogi

...y are on either side of one of the mounting screws. be careful not to use too much solder or they could short against the screw.

thingiverse

free

Arduino Mini BMO by electronhacks

...ts a little before slicing. https://www.youtube.com/watch?v=_64k2p-tmr8&index=4&list=plkia6oirucwbiimkvovtn78aslqh38hj2

thingiverse

free

Balancing robot with etched PCB shield by JDD

...heck the pins. they're probably not the same and the one i used. this would be easy to change in the fritzing file though.

thingiverse

free

Raspberry Pi Tablet

...harge power and activity led light is redirected (using nylon) to the case. backplate: bamboo wood back, with laser etched decal

thingiverse

free

Automatic Bike Brake Light by ChPech

...c level mosfet: (e.g. rfp30n06le) 12v cob-led module (e.g. sumbulbs ) adxl345 (sparkfun breakout) red rectangular back reflectors

thingiverse

free

Tarot Gimbal Board Covers by Jonesmg1

...es through the holes in the gimble controller. the small accelerometer board cover has 4 tabs for 2 sided adhesive or servo-tape.

thingiverse

free

Logitech C920 Webcam Solar Tracker Mount and Cover by stusona

...se to put 52 mm filters on. it has a spot to mount a sparkfun adxl345 breakout board so you can have some accelerometer feedback.

thingiverse

free

RGB Matrix Pixel Sand by adafruit

...rk with adafruit’s 50 plus stemma qt boards. matrix portal is designed to snap on the back of rgb matrices that use a hub75 port.

thingiverse

free

Digital Spirit Level by boztopuz

... battery and cable 1 x on/off switch button 1 x mpu6050 accelerometer 1 x 0.91" i2c screen 1 x prototype board for soldering

thingiverse

free

HoverDrone by Deanasawr

...x 1000kv contra-rotating motor assembly 1x li-po battery your favorite semi-permanent adhesive a few other 3d printed components.

thingiverse

free

Star Trek Combadge - Circuit Playground by adafruit

...uit-playground-combadge/overview circuit playgroundhttps://adafruit.com/products/3000 othermillhttps://adafruit.com/products/2323

thingiverse

free

Glint Pilots by tinkergen

...h glint in the box, but we have uploaded files so kids can also 3d print a pilot they like to fit in the "cargo space".

thingiverse

free

LED Rocket by eric_hcr80

...documents/df1463dc8f914260b68c3cf8/w/9c76c30104b34627b618ef78 i can include a pin layout for the arduino if anyone is interested.

thingiverse

free

Wheelie Skid Plate for Robot Vacuum CRL-200, Conga 3090, LDS M6, Navi 1030

.../shenzhen 3i robotics crl-200a, betterlife crl-200a, proscenic lds m6/r2, cecotec conga 3090, bobot navi 1030 and possibly others

thingiverse

free

3D Cube LED 8x8x6 by hpsaturn

...ng in the attached files, i included cura project file, and 3d models, also gcode file for artillery genius 3d printer. making of

thingiverse

free

Self Balancing Robot Project (work in progress) by daemonz144

...ors mpu-9250 gyroscope + accelerometer + magnetic field a4988 stepper motor driver raspberry pi + camera - main brain. lipo accu.

thingiverse

free

Improved E3D V6 Hotend Mount for Rostock Max V3 & Orion Deltas by Resinseer

...ld version. big thanks to those of you who have found this thing useful and have sent tips to me, they are very much appreciated.

thingiverse

free

Key of Aaravos - illuminated working prop

...d a 1000ah lipoly battery powers it. full write-up is here: https://drewsrobots.blogspot.com/2019/11/building-key-of-aaravos.html

thingiverse

free

DIY Balancing Robot by 3Dadicto

...nits 100 microf capacitors prototipe board 70x30mm 14mm button switch charging port 2 o-rings 95mm x 3.5mm m3, m2.5 and m2 screws

thingiverse

free

Homebrew Hydrometer by brendonbuilds

...che-preform-soda-bottle/132379354252 the source code for the hydrometer can be found here: https://github.com/bdtower8/hydrometer

thingiverse

free

STM32 "Blue Pill" Mount for 2040 Extrusions by clearchris

... here:https://www.thingiverse.com/thing:4762547https://www.thingiverse.com/thing:4762624https://www.thingiverse.com/thing:4762576

thingiverse

free

OpenAstroTracker IMU & GPS Support by fiorucci

...e routed through an rj45 plug to carry gnd, +5vcc, sda, scl, rx, tx. mag3110 uses gnd, 5vcc, sda, scl. gps uses gnd, 5vcc, rx, tx

thingiverse

free

Minecraft Nightlight by dparrish

...ion fit pieces. this project has been build and works just fine, but marked as wip since i haven't yet finished the write-up.

thingiverse

free

IcosaLEDron: A Multi LED Smart Ball by AfritLabs

.... visit our instructables tutorial for much more information: http://www.instructables.com/id/icosaledron-a-multi-led-smart-ball/

thingiverse

free

Parametric Gimbal, prints already assembled by Bluebie

...otentially be a neat tool for explaining gimbal lock to people learning 3d graphics too. created in collaboration with nornagon

thingiverse

free

VertiBOT by MAF

...l user interface software. video: http://youtu.be/a5ktt4gvpx8 useful info, schematic and code available: http://wp.me/p22sj0-ft

thingiverse

free

Compact 2 Axis GoPro Gimbal by Paralluminati

....more to come. ** this version has a holder for the mpu6050 accelerometer which is typically standard with the alexmos hardware

thingiverse

free

Vogal the Dragon by TheRat

... derivative of the dragon head: http://www.thingiverse.com/thing:1466 any help with the programming would be greatly appreciated.