Thingiverse
D1M BLOCK - ADXL345 (custom Accelerometer) block by IOT123
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is the casing for the Wemos D1 Mini (custom shield) ADXL345 (Accelerometer) .
This D1M BLOCK connects the power and I2C pins. This was developed to verify a solar tracker, but I realized this supports Roll/Pitch but not Yaw. A Gyroscope component is needed for Yaw (see GY521).
These components, a PIN JIG for soldering, and 2 off 8 pin 10mm Long Needle Female Pin Header Strip are required for this build.
Instructions
Code Examples
D1M BLOCKS
This D1M BLOCK connects the power and I2C pins. This was developed to verify a solar tracker, but I realized this supports Roll/Pitch but not Yaw. A Gyroscope component is needed for Yaw (see GY521).
These components, a PIN JIG for soldering, and 2 off 8 pin 10mm Long Needle Female Pin Header Strip are required for this build.
Instructions
Code Examples
D1M BLOCKS