Anycubic i3 Mega S Bowden coupler M10 x 1.0 by benspawn

Last crawled date: 3 years, 4 months ago

Anycubic i3 Mega S Bowden tube coupler

After downloading a version that was found here on Thingiverse and the threads appeared to be dimensionally incorrect, I gave up and went ahead and designed one up in Solidworks. This will fit a M10 x 1.0 thread on the cooling block or the fitting on the extruder side.

SPECIFICATIONS:

M10 x 1.0 thread
Custom threaded 1.5mm pitch tapered thread
Tapered nut to match custom threads
4.1mm tube cavity.

NOTE:

The design is dimensionally accurate. If you are not getting accurate parts, then your printer needs to be tuned to print accurate parts. You can comment if you need me to do some minor adjustments for the bowden tube cavity but 4.1mm should be plenty as you'd want this to be a friction fit. Also, my Anycubic i3 Mega S was supplied with M10 x 1.0 fittings. I believe there are some M10 x 0.9 fittings floating out there. At this stage, I do not plan on releasing an M8 or M6 thread model so I will not be responding to comments requesting for such threads. This is made to fit the Anycubic i3 Mega S and any other similar variants of printers.

Thanks for looking and using this!
If you like my design, and are feeling generous, feel free to leave me a tip!
Check my page out often for more designs as I continue to create and design stuffs!
Happy 3D-ing!