Yi Dome Camera Inverted Wall Mount by ChisTompso

Last crawled date: 3 years, 1 month ago

This mount allows you to attach the Yi Dome Camera to a wall, in the inverted orientation. Yes, the camera comes with a bracket to hang it from a ceiling, but it's far easier to repair screw holes in a wall than it is in the ceiling (especially if you have textured ceilings).
THERE ARE TWO MOUNT OPTIONS:
1) TWO PIECE MOUNT - The two pieces of the assembly are held together by four M3x6 screws. The reason it is two pieces instead of one is that I didn't think I'd get the camera locking interface correct on the first go, so I didn't want to waste time / material printing up the entire assembly to verify fit. In the future, this might prove useful for keeping the set-up modular and designing other wall (etc.) interfaces. You'll want to print "YiDomeCam-WallBracket.stl" and "YiDomeCam-CamPlate.stl."
You can use the same screws that the camera came with to attach the camera mount to the wall.
2) SINGLE PIECE MOUNT - It's name says what it is. Does the same thing as the two piece mount, but with only one piece to print! You'll want to print "YiCamMount-SinglePiece.stl."
You can use the same screws that the camera came with to attach the camera mount to the wall.