Thingiverse
WLToys 12428 Solid Front Axle
by Thingiverse
Last crawled date: 4 years, 3 months ago
Hi guys,
This is the front axle for a WLToys 12428 crawler conversion. I'm uploading the project in 3 different parts because it's kind of big and everyone might not want the whole thing. The parts are going to be front axle, chassis and back half cage. The whole thing allows you to build an SCX10 compatible(ish) crawler using most of the guts from a WLToys 12428 rock racer.
This front axle uses the gears and drive shafts from the WLToys. You'll need the output shaft for the pinion because the stock front axle couples with a drive cup and dog bone. You can use a back axle and cut off the end if you have a spare lying around. It's a 5mm shaft with a screw hole int he center and is slotted to fit the pinion.
I made some steering knuckles that work pretty well but the bearing cups may need a little massaging with a moto tool. Take note that the castor blocks are not symmetrical because the left side has a mount for the panhard bar.
Check it out on YouTube: https://www.youtube.com/watch?v=pi2Jhd1oP-0
As always, use at your own risk.
Wrench to drive or drive to wrench?
This is the front axle for a WLToys 12428 crawler conversion. I'm uploading the project in 3 different parts because it's kind of big and everyone might not want the whole thing. The parts are going to be front axle, chassis and back half cage. The whole thing allows you to build an SCX10 compatible(ish) crawler using most of the guts from a WLToys 12428 rock racer.
This front axle uses the gears and drive shafts from the WLToys. You'll need the output shaft for the pinion because the stock front axle couples with a drive cup and dog bone. You can use a back axle and cut off the end if you have a spare lying around. It's a 5mm shaft with a screw hole int he center and is slotted to fit the pinion.
I made some steering knuckles that work pretty well but the bearing cups may need a little massaging with a moto tool. Take note that the castor blocks are not symmetrical because the left side has a mount for the panhard bar.
Check it out on YouTube: https://www.youtube.com/watch?v=pi2Jhd1oP-0
As always, use at your own risk.
Wrench to drive or drive to wrench?
Similar models
thingiverse
free
12428 SCX10 Clone Jeep Wrangler Parts by WrenchToDrive
...slands driver i run with this:https://www.thingiverse.com/thing:3533920
use at your own risk.
wrench to drive or drive to wrench?
thingiverse
free
wltoys 12428 body Upgrade, back light
...wltoys 12428 body upgrade, back light
thingiverse
as in the description. i hope it will be useful to you.
thingiverse
free
Wltoys 70mm extention kit by emil2rs1
...stealt, but think any 1:10 axel cup should fit)
you will also need two 5 x 10 x 4 bearigs
hope you can get some use out of it. :)
thingiverse
free
Wltoys arm 12428-0004 12423-0004
...bs. the strongest one was printed out using pla.
this is left arm. if you need right one just use mirror function in your slicer.
thingiverse
free
wltoys 12428 Front swing arm by DominikWachow
...wltoys 12428 front swing arm by dominikwachow
thingiverse
wltoys 12428 front right swing arm, flip to print left
thingiverse
free
12428 rear axle top bracket - single piece
...12428 rear axle top bracket - single piece
thingiverse
a single piece rear axle top bracket for wltoys 12428.
thingiverse
free
Battery support for WlToys 12428 by TeK2000
...ery support and front shock tower) can be done with all the originals parts !! no need to buy something else to upgrade your car.
thingiverse
free
Injora Axle Steering Knuckle for use with Axial Drive Shaft by WrenchToDrive
...tty strong if you print with good settings. do whatever works for you.
use at your own risk.
wrench to drive or drive to wrench?
grabcad
free
Lower Control Arm (front)
...ited because of axle shaft is going between then and to locate suspension little back so the axle shaft can go between the wheels
thingiverse
free
W2D IV - Baja Racer by WrenchToDrive
...use the parts from a wltoys 12428 or something similar pretty easily with your biggest problem being mounting the...
12428
3d_export
$6
Figure of a sniper with SVD stl
...set contains only stl format without rig and animations.<br>vertices 12428 polygons...
3d_export
$12
Mini System 3ds obj 3D Model
...3ds obj mini system 3ds obj 3d model koneck 12428 ...
3d_export
$6
Figure of a standing sniper with SVD stl
...set contains only stl format without rig and animations.<br>vertices 12428 polygons...
3d_export
$6
Figure of a sniper in a lying down with SVD stl
...set contains only stl format without rig and animations.<br>vertices 12428 polygons...
thingiverse
free
Wltoys 12428 Bumper protection by Afterhender
...wltoys 12428 bumper protection by afterhender
thingiverse
bumper protection for wltoys 12428
thingiverse
free
12428 Front shock tower by KKFatso
...ont shock tower by kkfatso
thingiverse
to position the 12428 rc car's front shocks upright i have designed a tower for that.
thingiverse
free
wltoys 12428 Front swing arm by DominikWachow
...wltoys 12428 front swing arm by dominikwachow
thingiverse
wltoys 12428 front right swing arm, flip to print left
thingiverse
free
wltoys 12428 wheel by DominikWachow
...wltoys 12428 wheel by dominikwachow
thingiverse
use original tire and rims.
thingiverse
free
Wltoys 12428. Return to the neutral position of the controller by mariockr
...to the neutral position of the controller by mariockr
thingiverse
wltoys 12428. return to the neutral position of the controller
thingiverse
free
12428 rear axle top bracket - single piece
...12428 rear axle top bracket - single piece
thingiverse
a single piece rear axle top bracket for wltoys 12428.
Wltoys
3ddd
free
Квадрокоптер Cyclone
...квадрокоптер cyclone 3ddd квадрокоптер , cyclone , wltoys квадрокоптер cyclone. текстуры в комплекте. модель с...
thingiverse
free
Wltoys K989 drift
...wltoys k989 drift
thingiverse
wltoys k989
thingiverse
free
Wltoys A979 Stand
...wltoys a979 stand
thingiverse
wltoys a979 stand
thingiverse
free
wltoys k989 Wing by NBdesigns
...wltoys k989 wing by nbdesigns
thingiverse
wltoys k989 wing
thingiverse
free
Wheel WLtoys A979 by Mitka
...wheel wltoys a979 by mitka
thingiverse
wheel wltoys a979
thingiverse
free
Connector - Wltoys by AndreChies
...ile included for customization.
peça para carro rc. conector do wltoys offroad 1:12.
arquivo freecad incluso para personalização.
thingiverse
free
WLtoys k989 suspension bracket
...wltoys k989 suspension bracket
thingiverse
spare suspension bracket for wltoys k989 1/28 rc car
thingiverse
free
Wltoys 12428 Bumper protection by Afterhender
...wltoys 12428 bumper protection by afterhender
thingiverse
bumper protection for wltoys 12428
thingiverse
free
f949 main gear wltoys by driekes1984
...f949 main gear wltoys by driekes1984
thingiverse
the main gear of the wltoys f949
thingiverse
free
Wltoys K989 by burtendco
...wltoys k989 by burtendco
thingiverse
diffuseur rc car
Axle
3d_export
$5
axle knob
...axle knob
3dexport
axle knob
turbosquid
$3
Axle-loadLimitroadsign
...loadlimitroadsign for download as 3ds, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1532898)
3d_export
$30
Car axle 3D Model
...e transmission drive power assembly gear rear wheel step maya softimage fbx vray
car axle 3d model sunshineweilian 99506 3dexport
3d_ocean
$12
Exploded Half Axle
.... the model is built out of quads and is subdivisable. different parts are separate for ease of handle. the model comes in 5 f...
turbosquid
$50
Trommel_1 Line Axle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
DUALLY AXLE AND DRIVESHAFT
... and driveshaft for download as max, blend, fbx, obj, and 3ds on turbosquid: 3d models for games, architecture, videos. (1653704)
3d_ocean
$9
Half Axle
...el is built out of quads and is subdivisable. different parts are separate for ease of handle. the model comes in 4 formats: -...
3d_export
$50
Exploded Half Axle 3D Model
...shaft drive gearbox wheel velocity constant engine chassis part planetary
exploded half axle 3d model dragosburian 93254 3dexport
turbosquid
$50
Trommel 2 Line Axles
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
rear axle dual rim
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Solid
turbosquid
$70
Solider
...er
turbosquid
royalty free 3d model solider for download as on turbosquid: 3d models for games, architecture, videos. (1232788)
3d_export
$6
newjoy - solid
...;br>shelf - solid sd-1400 - 120х30х74<br>table - solid sd-1401 - 123х65х89<br>bookcase - solid sd-1500 - 85х35х176
3d_ocean
$3
Vray Solid Glass
...vray solid glass
3docean
3dmax glass material solid glass vray
vray solid glass for 3dmax
turbosquid
$5
Toy Solider
...royalty free 3d model toy solider for download as png and stl on turbosquid: 3d models for games, architecture, videos. (1398359)
turbosquid
$1
Solid Table
...y free 3d model solid table for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1418669)
3d_export
$8
solid wood chair
...solid wood chair
3dexport
solid wood chair. have texture
turbosquid
$20
Solid Snake
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Chair solid
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$11
archimedean solids
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Bed Solid
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Front
archibase_planet
free
Front
...front
archibase planet
facade front bluff
front 3d01a - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
front fork
...front fork
3dexport
front fork
3d_export
$5
Front Desk
...front desk
3dexport
modern and minimal reception front desk
3d_ocean
$4
Medical Front
...medical front
3docean
horror low medical
medical front
3d_ocean
$5
Front Desk
...front desk
3docean
desk front office reception
office reception counter or front desk. cad file and obj file included.
3ddd
free
Axor WaterDream by Front
...r , waterdream , front
axor waterdream by front
3d_export
$5
front nut eye
...front nut eye
3dexport
front nut eye
3d_export
$5
front screw eye
...front screw eye
3dexport
front screw eye
3d_export
$5
front clamping device
...front clamping device
3dexport
front clamping device
archive3d
free
Front 3D Model
...rchive3d
facade front bluff
front 3d01a - 3d model (*.gsm+*.3ds) for interior 3d visualization.