SnapMaker Accessory Mount by CthulhuLabs

Last crawled date: 3 years ago

This is an accessories mount for SnapMaker. I designed it to allow me to better attach a part cooling fan to the 3d printing module, but it could be easily used on the CNC or Laser module for mounting other things. The holes in the mount are designed to be tapped with an M3 tap then accessories attached by screwing in M3 bolts.
To attach it to a module you need to use two long ZIP ties (or a few short ones joined together). I used 14 inch ZIP ties but I think 12 inch ones will do. Align the part on the front bend of the module and then wrap each ZIP tie around the module. There are two groves in the accessory mount on either side. Align the ZIP ties with these groves and tighten them down. In the images I have my part cooling fan attached already. You can find that here:
https://www.thingiverse.com/thing:2816980
As always I have included my source file so others can easily modify this.