Polycrystalline Solar Panel, 0.5V, 400 mA 3d model
Warning. This content is not moderated and could be offensive.
cigarette
3dmdb logo
GrabCAD
Polycrystalline Solar Panel, 0.5V, 400 mA

Polycrystalline Solar Panel, 0.5V, 400 mA

by GrabCAD
Last crawled date: 1 year, 11 months ago
Polycrystalline Solar Panel, 0.5V, 400 mA

The length and width are approximately 59 mm x 37 mm. Thickness is 3 mm.

The open circuit voltage (Voc) I is 0.6V on a full bright sunny day.

The Voc may vary slightly from vendor to vendor for this specific size.

Connect 5 of these together in series and you may get close to a 3V charging rate to charge a 3V supercapacitor at around 400 mA.
Be careful and don't go over the voltage rating of the supercapacitor or you may damage it.

0.5V, 400 mA versions:
https://www.aliexpress.com/item/1005002956249815.html?spm=a2g0o.9042311.0.0.59694c4dwFdkWf


Link to 3V, 450F supercapacitor I will be using that will get solar charged:
https://www.digikey.com/en/products/detail/tecate-group/TPLH-3R0-450SS35X71/9930287

Caution serious injury or death may occur if you don't know how to use the supercapacitor!
i.e. it short circuits.

Use this ideal diode to prevent reverse current leakage from the supercapacitor to the solar panels when they get shaded or it gets dark:
https://www.maximintegrated.com/en/products/analog/amplifiers/MAX40200.html

Ultra-Tiny Micropower, 1A Ideal Diode with Ultra-Low Voltage Drop
Current Switch/Ideal Diode Saves Space and Offers 10x Lower Voltage Drop Than Schottkys

Tags