Thingiverse
Lulzbot Taz Idler Tension Gauge (7.7mm) by jaln
by Thingiverse
Last crawled date: 3 years ago
This is is a tensioning gauge for the Taz extruder filament idler.
It is sized to fit between the two washers of each tensioning screw. 7.7mm.
Back screws off until you can insert the gauge until it bottoms on the spring.
Tighten until it is just tight enough that you can still slide the gauge out without dragging the screw also. Repeat on the other screw. No guessing. I've even used it while printing!
I used ABS. 240/100C. 20% fill 2 top,bottom and sidewall layers. .28 layers.
It is sized to fit between the two washers of each tensioning screw. 7.7mm.
Back screws off until you can insert the gauge until it bottoms on the spring.
Tighten until it is just tight enough that you can still slide the gauge out without dragging the screw also. Repeat on the other screw. No guessing. I've even used it while printing!
I used ABS. 240/100C. 20% fill 2 top,bottom and sidewall layers. .28 layers.
Similar models
thingiverse
free
Lulzbot Mini / Taz Tensioner Lock by renarts
...g for this so i posted it here. just print it out and slip it over the thumb screws of the idler tensioner to lock them in place.
thingiverse
free
Lulzbot Filament Idler Tension Jig for TAZ and Mini by ITWorks
...truders that require an 8mm spacing between the face of the idler and the edge of the ridged section of the idler tension screws.
thingiverse
free
3mm to 5mm bushing by bandook
...tensioners only accommodate a 3mm screw. so instead of drilling and fiddling, you can slip this in the idler and use a 3mm screw.
thingiverse
free
Ultimate i3 X belt tensioner by Tailslide
... idlers. if you have the tensioner on the bottom you may need to scale the z height of this part until you have enough clearance.
thingiverse
free
CR-10 S5 Low Profile Y-Axis Belt Tensioner by Pampinho
...full extent of my printer therefore i designed a similar mount for the idler, but with a lower profile...
thingiverse
free
AM8 Y tensioner (offsetted idler) by bftech
...(to the back of the printer) to be able to use this upgrade (https://www.thingiverse.com/thing:2328307).
(wip until i printed it)
thingiverse
free
Taz Pro Y Idler and Belt Clamp Design for 3D Printed Idler compatible with GT2/GT3 belts (No Machined Idler required)
...have. this will allow you to make a y-idler similar to the taz 6 designs that actually fit the...
thingiverse
free
Lulzbot TAZ no tool dial gauge mount by MarcElbichon
...t should work with the stock taz5 one, maybe with older version too...
the dial gauge used is a 1 inch (25 mm) travel.
have fun !
thingiverse
free
Wilson 2. Heavy Duty Y Tensioner. by lowfat
... to heat up the m3 nut for it to slide down the hole.
an m4 x 25mm and m4 nut is required to secure the tensioner to the y idler.
thingiverse
free
Improved Anet A8 / AM8 X Tensioner
...e sure to comment! i will see what i can do!
as usual, i have also included the blender file in case you want to edit it further.
Jaln
thingiverse
free
Vase-X3 by jaln
...awn.
there are two sizes of this triangle to hex transition.
they are printed upside to insure that they stay stuck to the bed.
thingiverse
free
AmanteVase by jaln
...is especially useful when you are using pause to change filament colors. pausing on the inner wall will help conceal the change.
thingiverse
free
Vase-X4 by jaln
...t 100mm.
the smaller one is printed upside down for stability while printing.
this design is my favorite of this series.
enjoy!
thingiverse
free
Turbowlz II by jaln
...r the other designs to make your own designs.
lid knob made bigger on 01/22/15. deleted old file-- new file has a designation.
thingiverse
free
Turbo-Bowl: Turbo-Vase+, the Sequel Continues by jaln
...the sequel continues by jaln
thingiverse
here's some matching bowls for vase10a.
(turbo-vase+, the sequel).
scaled 1x and 2x
thingiverse
free
TurBowlz I by jaln
...ed .33mm layers, i am amazed that this even printed with no support!
a testament to lulzbot taz4 and gizmo dorks transparent abs.
thingiverse
free
BublaVase by jaln
... print job. not intentional, but i often recommend printing partial prints to make bowls from vases. some look great both ways.
thingiverse
free
Vase-X2 three versions by jaln
...previous vases were rotations, sweeps along splines, and boolean functions.
scale em, stretch em. have fun.
show us your work.
thingiverse
free
FlamoVase by jaln
...nt at about 30% of its full height, it makes a great screw on lid for the full print of the same scale. see the last two photos.
thingiverse
free
Vase-X1 by jaln
...ave slots. x3 is thicker.
the x1 in the photo was printed right side up and decided to leave the heated bed prior to completion.
Taz
3d_ocean
$19
TAZ RIGGED
...ax version only texture is used only for wb logo, taz dont need texture no special render engine needed, just unzip and render...
3d_export
$5
Taz character 3D Model
...taz character 3d model
3dexport
taz toon character cartoon
taz character 3d model supercigale 22095 3dexport
cg_studio
$10
Taz 3D3d model
...taz 3d3d model
cgstudio
.3ds .max - taz 3d 3d model, royalty free license available, instant download after purchase.
cg_studio
$15
Taz Rigged3d model
...ged3d model
cgstudio
.3ds .fbx .max .obj - taz rigged 3d model, royalty free license available, instant download after purchase.
3d_export
$10
Taz Toy Calendar 3D Model
... 3d model
3dexport
taz toy calendar day month year looney tunes cartoon kid child
taz toy calendar 3d model nkfrds 49687 3dexport
3d_export
$10
Taz Tasmanian Devil RIGGED 3D Model
...y tunes anime bunny rigged material fantasy creature diable dessin
taz tasmanian devil rigged 3d model supercigale 28390 3dexport
3d_export
$19
Thylacine 3D Model
...animalia chordata mammalia marsupial dog extinct animals tiger tassie taz thylacine 3d model poly3dmodels 90790...
3d_export
$12
Bowl Decorated 3D Model
...bowl decorated 3d model 3dexport bowl tazn elements ceramics kitchen plastic cup container decorative cake biscuits...
3ddd
$1
Crate & Barrel Serveware
...crate & barrel поднос -http://www.crateandbarrel.com/feast-platter/s186961 набор ножей для сыра -http://www.crateandbarrel.com/tazcheese-knife-3-piece-set/s681377 бокал...
thingiverse
free
TAZ by Taz8373
...taz by taz8373
thingiverse
my 1st print
Lulzbot
thingiverse
free
LulzBot Rocktomek by LulzBot
...lulzbot rocktomek by lulzbot
thingiverse
https://download.lulzbot.com/3d_models/rocktomek/
thingiverse
free
THE Lulzbot spool holder
...the lulzbot spool holder
thingiverse
stl and ipt topmount spool holder for lulzbot
thingiverse
free
Lulzbot logo by Halg199703
...lulzbot logo by halg199703
thingiverse
this is the lulzbot logo. i also have a file for dual extruder.
thingiverse
free
LulzBot Bio printer Model
...lulzbot bio printer model
thingiverse
this is a model of the lulzbot bioprinter
thingiverse
free
Lulzbot Taz Enclosure by MrMcGuire
...lulzbot taz enclosure by mrmcguire
thingiverse
parts for an enclosure for lulzbot taz
thingiverse
free
Lulzbot Spool Holder by MAKE
...lulzbot spool holder by make
thingiverse
a spool holder for your lulzbot.
thingiverse
free
Lulzbot mini spool holder by chewie80524
...lulzbot mini spool holder by chewie80524
thingiverse
this part holds the spool on a lulzbot mini. this design came from lulzbot.
thingiverse
free
Lulzbot Claystruder by 102drewt
...r for the lulzbot taz 4. every thing is snap together, and it only requires a threaded rod, a nut to fit it, and a stepper motor.
thingiverse
free
Lulzbot Mini Enclosure brackets by chewie80524
...lulzbot mini enclosure brackets by chewie80524
thingiverse
lulzbot taz/mini enclosure brackets.
thingiverse
free
Lulzbot mini toolbox by nicsna
...t mini using cura scale down to 0.97.
hope you like it and make sure to leave some feedback or suggestions for my next design. :)
Idler
3d_export
$20
telescopic stacker belt conveyor
...and the actual components are as follows cema c idler cema c impact roller dodge bearing avoid tension bearing...
3d_export
$49
Liebherr R9250 Tracks - Crawler
...main parts: bottom rollers car bodies final drives top idler front idlers slewing rings-turntable bearings sprockets text track chains...
3d_export
$119
JD - 953MH Tracked Log Loader
...boby with engine<br>main body bolts<br>main body grilles<br>pedals<br>right - front idlerlt;br>right - rear idler<br>right track chain<br>right track links<br>right track protector<br>right...
3d_export
$129
JD - 959MH Tracked Feller Buncher
...boby with engine<br>main body bolts<br>main body grilles<br>pedals<br>right - front idlerlt;br>right - rear idler<br>right track chain<br>right track links<br>right track protector<br>right...
3d_export
$119
JD - 959MH Tracked Log Loader
...boby with engine<br>main body bolts<br>main body grilles<br>pedals<br>right - front idlerlt;br>right - rear idler<br>right track chain<br>right track links<br>right track protector<br>right...
3d_export
$119
JD - 953MH Tracked Harvester
...tool - lower<br>moving limbing tool - upper<br>pedals<br>right - front idlerlt;br>right - rear idler<br>right feed rollers<br>right track chain<br>right track links<br>right...
thingiverse
free
Idler seat by jcen517
...idler seat by jcen517
thingiverse
idler seat
thingiverse
free
Idler by GEON_3D
...idler by geon_3d
thingiverse
idler para extrusor 1,75
imprimir en abs, petg o cualquier material resistente
thingiverse
free
wade idler by nautilux
...wade idler by nautilux
thingiverse
wade idler reforzado
thingiverse
free
Idler Frame by Dinusha
...idler frame by dinusha
thingiverse
idler frame specially for the belt conveyors.
7Mm
turbosquid
free
Remington 7mm Magnum Box
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$9
Atheist necklaces
...3dexport modeling with 3dsmax rendering corona 3dsmax 2015 6*7cm 7mm ...
3d_export
$5
miniature of hunminjeongeum
...sejong of the joseon dynasty (y1443). * size : 30*44*7mm ...
3d_export
$100
KUBLAI P1S GBB Pistol
...kublai p1s gbb pistol 3dexport gbb 6/7mm bb<br>in addition, there are a large number of models,...
3d_export
$10
Simpl1
...1,2mm - 2, 1.5mm - 2, 1,75mm - 4, 7mm -1 you can ask me any...
3d_export
$90
KUBLAI P1 GBB Pistol
...kublai p1 gbb pistol 3dexport kublai p1 gbb pistol<br>gbb 6/7mm bb<br>in addition, there are a large number of models,...
3d_export
$75
Remote weapon station RWS Browning M2 3D Model
...weapon station browning m2 heavy machine gun machinegun 12 7mm 50 caliber mg optic sensor remote weapon station rws...
3d_export
$5
Chamomile ring
...in silver 2.61g gem diameter 2.5mm - 10, diameter 7mm -1 i can modify any part of the model...
3d_export
$100
KUBLAI P1 9MM Pistol
...3dexport 9mm pistol modified by gbb<br>kublai p1 gbb pistol<br>gbb 6/7mm bb<br>in addition, there are a large number of models,...
cg_studio
$129
P-51D Mustang RAAF3d model
...packard v-1650 escort long range single seat korean 12 7mm machine gun transport .3ds .c4d .lwo .obj - p-51d...
Gauge
3d_ocean
$10
Gauges
...rim to them. each gauge has an xpresso tag to give them an automatic animation without the need for keyframing and can be chan...
3d_export
$5
pressure gauge
...pressure gauge
3dexport
pressure gauge
3d_export
$5
gauge protector
...gauge protector
3dexport
gauge protector
3d_export
$5
Gauge 3D Model
...gauge 3d model
3dexport
gauge pressure gas air liquid
gauge 3d model fau 71180 3dexport
3d_export
$5
protected pressure gauge
...protected pressure gauge
3dexport
protected pressure gauge
3d_export
$5
hard gauge protector
...hard gauge protector
3dexport
hard gauge protector
turbosquid
$29
Screw Gauge
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Marking Gauge
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Blade Gauge
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
12 Gauge 3D Model
...12 gauge 3d model
3dexport
shotgun shell gauge 12
12 gauge 3d model pirog 54511 3dexport
Tension
3d_export
$5
adjustable tension lock
...adjustable tension lock
3dexport
adjustable tension lock
turbosquid
$5
tension ring
...oyalty free 3d model tension ring for download as fbx and stl on turbosquid: 3d models for games, architecture, videos. (1553452)
turbosquid
$3
Tension Chair
...free 3d model tension chair for download as obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1251503)
3d_export
$5
transformador de tension
...transformador de tension
3dexport
transformador de tension entrada 460vac salida 220vac marca audax
turbosquid
$20
Motorbike Chain Tensioner
...y free 3d model motorbike chain tensioner for download as stl on turbosquid: 3d models for games, architecture, videos. (1428322)
turbosquid
$25
TENSION-WOOD-CHAIR
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
tension-bentwood-chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Tension engagement ring
...n engagement ring for download as obj, fbx, 3dm, dwg, and stl on turbosquid: 3d models for games, architecture, videos. (1491631)
3d_export
$10
Ruby Tension set Ring 3D Model
...ruby tension set ring 3d model
3dexport
tension set ruby ring in 18k
ruby tension set ring 3d model rehansheikh 25254 3dexport
turbosquid
$20
Superficial Tension Exp. Image.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
7
turbosquid
$6
Rock 7-7
...urbosquid
royalty free 3d model rock 7-7 for download as obj on turbosquid: 3d models for games, architecture, videos. (1647866)
turbosquid
$8
Rock 7-7
...id
royalty free 3d model rock 7-7 for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1693416)
design_connected
$16
No 7
...no 7
designconnected
sibast no 7 computer generated 3d model. designed by sibast, helge.
3ddd
$1
Team 7
...team 7
3ddd
team 7
моделилось с кталога team 7
3d_export
$5
hinge 7
...hinge 7
3dexport
hinge 7
turbosquid
$9
IS-7
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Calligraphic Digit 7 Number 7
...hic digit 7 number 7 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389338)
3ddd
free
team 7
...team 7
3ddd
team 7
стол фабрики team 7.
типы размеров /900,1000/x/1750,2000,2250/x/750/
раздвигается +600 или +1200
3ddd
$1
PLANTS 7
...plants 7
3ddd
цветы , горшок
plants 7.. hope u all enjoying the series
3ddd
$1
Pillows #7
...pillows #7
3ddd
подушка , pillows
pillows #7
3ds max 2011,fbx + textures