HDMI VIKI 108SP Box by thanhglobal

Last crawled date: 3 years ago

Hi,
These are Objects design for 8 Port HDMI Splitter Box.
Convert from main board 108SP to 148 Box 4K.
A Cura Engine.
Print area Width 210 mm
Print area Depth 305 mm
Print area Height 200 mm
Repetier Host 2.05 - 3D Printer software.
Resolution 0.1mm.
Print Speed : 50mm/s ; Out Perimeter 45mm/s
infill Density: 20%
Print temperature: 195 C
Shell Thickness: 1 mm
Top/Bottom thickness: 2 mm
And letter Box:
Resolution : 0.4 mm
infill: 3 %
Shell Thickness: 0.4 mm
Top/Bottom thickness: 0.4 mm
End Code Printer AK:
M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
M84 ;steppers off
G90 ;absolute positioning
End Code Printer C-Gen:
; Default end code
;G1 X0 Y0 Z130 ; Get extruder out of way. Uncomment to use!
M107 ; Turn off fan
; Disable all extruder
G91 ; Relative positioning
{IF_EXT0}T0
{IF_EXT0}G1 E-1 ; Reduce filament pressure
M104 T0 S0
G90 ; Absolute positioning
G92 E0 ; Reset extruder position
M140 S0 ; Disable heated bed
M84 ; Turn steppers off
If you have any question, please email to me at thanh_hcm@yahoo.com
Thanks.