anycubic i3 auto turn off switch (pericles) by ikaros1978

Last crawled date: 3 years, 4 months ago

just a simple way to turn off your printer automatically when the printing ends.
you can use any switch that can withstand 240v (2 amps is enough). you have to change the end code to wait 90-120 seconds to cool the hotend and then lead the bed forward and turn off the power supply through the switch. is dangerous from someone you do not know.So be careful.
this is the end code :
G91 ;relative positioning
G1 F1000 E3 ;retract
G1 F3000 Z5 ;lift nozzle 5mm
G90 ;change to absolute
M104 S0 ; turn off extruder
M106 S0 ; turn off cooling fang
M140 S0 ; turn off bed
G4 S90 ; wait 90 seconds
G1 X0 Y400 ;prepare for part rermovel
you must open 2 holes at front of your printer in order to pass in the cable and one of a Μ3Χ20 screw. If you dont want to drill the printer then pass the wire outside the printer around it and you can just use a power strip to turn it off