Thingiverse
Ender 3 Trianglelab Bondtech BMG + E3D V6 Direct Drive Mount System by 310weber
by Thingiverse
Last crawled date: 3 years, 3 months ago
UPDATES:
30/10/2020 - Added mount and duct designs for a 4020 blower fan in case someone prefers that size. Let me know how they work in the comments.
Design Information:
This is my attempt at a super simple mount assembly for a Bondtech BMG (or clone) with E3D V6 hot end in direct drive configuration. I tried to strip everything down to the bare essentials. Nothing fancy but it works great. No modifications needed to the printer other than wiring up the new components.
Notes:
I designed the BLTouch mounts but have not yet tested because I don't have one yet. Please let me know in the comments if you've tried it out and what your experience is.
I think this would also work on CR-10 (and maybe other Creality printers) but I haven't tried it. If you have success (or failure) on other printers let me know in the comments.
Fabrication and Installation:
All parts print easily with no supports. I used PLA for rigidity it has been holding up well so far.
Print the main mount part with relatively high infill to stop the portion between the extruder and stepper motor from getting crushed as the motor heats up.
I recommend using an M3 tap to clean out an thread the holes for the fan mount. It makes it easier and more reliable to thread in the screws. Let me know if you'd like to see a version with inset nuts instead of threading directly into the plastic.
I included a couple loops on the edges of the mount plate to tidy your cables using cable ties
The bondtech extruder runs in reverse to the stock extruder so you'll have to reverse the wiring if you are using the stock extruder motor and cable. The small motor I bought with mine plugged directly into the main board without modification. Your mileage may vary.
Hardware Required:
2 pcs - M3x6 mm bolts from original fan shroud - must be used in old hot end mount holes
6 pcs - M3x8 bolts (M3x6 will work too)
2 pcs - M4x20 bolts
2 pcs - M4 nuts
Extruder and Hot End Details:
All the upgrade parts were purchased from TriangleLab here: TriangleLab on AliExpress
Make sure to get the 24V version for Ender 3.
The parts generally seem to be good quality and perform well. I've printed PLA, PETG, and TPU so far with no issues. The only exception is the 5015 cooling fan - it has stopped functioning unless I give it a little boost to get it started.
Slicing and Firmware:
This modification places the nozzle exactly 11.5 mm in the -Y direction (toward the front of the printer) from the original nozzle location. This means that the nozzle will be too far forward when the printer homes. It also means that the nozzle will not be able to reach the back of the bed before it runs out of travel ( you will lose 11.5 mm of Y print area).
When slicing, avoid placing anything within the first ~15 mm of the front of the bed.
**If you use Mesh Bed Levelling" you will need to change the following line in the Marlin FW configuration_adv.h file to limit the probe area:
FROM "//#define MESH_MIN_Y MESH_INSET"
TO "#define MESH_MIN_Y 25"
I recommend modifying the custom start G-Code in your slicer to make sure the purge line starts and ends at Y=15 mm. Default in my slicer was Y=10 mm and it printed slightly off the end of the bed.
Adjust your E-Steps to account for the 3:1 gear ratio on the extruder. Recommended starting value is 415 steps/mm. After calibration I ended up at 425 steps/mm.
During your first test print, check the extruder stepper motor to ensure that it isn't either skipping (current too low) or overheating (current too high).
I'm using a 23 mm thick "pancake" motor (1A max rated current). I had to turn Vref way down on the main board to keep it from overheating.
For my setup (Ender 3 with TMC2208 stepper drivers) I set Vref to 0.8 V.
You will need to find the right setting for your specific controller - Google is your friend.
30/10/2020 - Added mount and duct designs for a 4020 blower fan in case someone prefers that size. Let me know how they work in the comments.
Design Information:
This is my attempt at a super simple mount assembly for a Bondtech BMG (or clone) with E3D V6 hot end in direct drive configuration. I tried to strip everything down to the bare essentials. Nothing fancy but it works great. No modifications needed to the printer other than wiring up the new components.
Notes:
I designed the BLTouch mounts but have not yet tested because I don't have one yet. Please let me know in the comments if you've tried it out and what your experience is.
I think this would also work on CR-10 (and maybe other Creality printers) but I haven't tried it. If you have success (or failure) on other printers let me know in the comments.
Fabrication and Installation:
All parts print easily with no supports. I used PLA for rigidity it has been holding up well so far.
Print the main mount part with relatively high infill to stop the portion between the extruder and stepper motor from getting crushed as the motor heats up.
I recommend using an M3 tap to clean out an thread the holes for the fan mount. It makes it easier and more reliable to thread in the screws. Let me know if you'd like to see a version with inset nuts instead of threading directly into the plastic.
I included a couple loops on the edges of the mount plate to tidy your cables using cable ties
The bondtech extruder runs in reverse to the stock extruder so you'll have to reverse the wiring if you are using the stock extruder motor and cable. The small motor I bought with mine plugged directly into the main board without modification. Your mileage may vary.
Hardware Required:
2 pcs - M3x6 mm bolts from original fan shroud - must be used in old hot end mount holes
6 pcs - M3x8 bolts (M3x6 will work too)
2 pcs - M4x20 bolts
2 pcs - M4 nuts
Extruder and Hot End Details:
All the upgrade parts were purchased from TriangleLab here: TriangleLab on AliExpress
Make sure to get the 24V version for Ender 3.
The parts generally seem to be good quality and perform well. I've printed PLA, PETG, and TPU so far with no issues. The only exception is the 5015 cooling fan - it has stopped functioning unless I give it a little boost to get it started.
Slicing and Firmware:
This modification places the nozzle exactly 11.5 mm in the -Y direction (toward the front of the printer) from the original nozzle location. This means that the nozzle will be too far forward when the printer homes. It also means that the nozzle will not be able to reach the back of the bed before it runs out of travel ( you will lose 11.5 mm of Y print area).
When slicing, avoid placing anything within the first ~15 mm of the front of the bed.
**If you use Mesh Bed Levelling" you will need to change the following line in the Marlin FW configuration_adv.h file to limit the probe area:
FROM "//#define MESH_MIN_Y MESH_INSET"
TO "#define MESH_MIN_Y 25"
I recommend modifying the custom start G-Code in your slicer to make sure the purge line starts and ends at Y=15 mm. Default in my slicer was Y=10 mm and it printed slightly off the end of the bed.
Adjust your E-Steps to account for the 3:1 gear ratio on the extruder. Recommended starting value is 415 steps/mm. After calibration I ended up at 425 steps/mm.
During your first test print, check the extruder stepper motor to ensure that it isn't either skipping (current too low) or overheating (current too high).
I'm using a 23 mm thick "pancake" motor (1A max rated current). I had to turn Vref way down on the main board to keep it from overheating.
For my setup (Ender 3 with TMC2208 stepper drivers) I set Vref to 0.8 V.
You will need to find the right setting for your specific controller - Google is your friend.
Similar models
thingiverse
free
trianglelab BMG Extruder motor fan mount by KraliCzech
...r motor fan mount by kraliczech
thingiverse
just my design of a simple fan mount for the trianglelab bmg extruder stepper motor.
thingiverse
free
Larger fan shroud for AL-BMG extruder from trianglelabs
...e fan shroud that came with the kit doesn't fit properly, it sit far from the nozzle. i enlarged the shroud using fusion 360.
thingiverse
free
LulzBot Taz 4-5 E3D Direct Drive BondTech Extruder Mount by Teasleyprint
...rmware.
need to set reset/ calibrate the estep. (mine was 492.45)
after you get it all set up you have to reset you z home offset
grabcad
free
60mm Case Fan to 1/2" adapter
...duce weight of the nozzle which increases motor life, print quality, improves useable print speed, and wears less on your device.
thingiverse
free
Bondtech QR mount for Rostock Max V2
...n my printer and material you may need to make small adjustments in the print to account for differences in your printers output.
thingiverse
free
BondtechLGX Ender 3 BLTouch Mount by drivinfast247
...ure they get credit for that.
i updated the design with a few small changes in geometry and also added a stepper motor vent hole.
thingiverse
free
Fan for Craftbot extruder motor by rocker_bbert
...d parts to a 12v fan 40x40x11mm and clip it to the stepper motor.
i connet the fan parallel to the extruder fan. (your choice...)
thingiverse
free
Anycubic 4Max Extruder Stepper Motor Cooler NEMA 17 by Sp4wN
...claimer: i am not claiming you can solve the ticking problem with this thing, there are several other factors can cause this too.
thingiverse
free
Tronxy X5SA PRO Direct Drive BMG-M + Mosquito Hotend Mount
...
note: this version does not have a mount for the x-axis homing switch as i'm currently using sensorless homing with my duet2
thingiverse
free
PC Fan SSD Mount
...g screws don't interfere with the fan blades. if they do, let me know, and i can make a version with countersunk screw holes.
310Weber
thingiverse
free
Ender 3 Spool Holder Side Mount 45 - Revised by don-f
...thingiverse the original compact 45 degree spool holder from 310weber works great as designed on my ender 3 pro....
thingiverse
free
Ender 3 Side Spool Holder 45 degree by bibiwood
...holder 45 degree by bibiwood thingiverse a remix of 310weber#39;s spool holder to use 4 bolts instead of 2...
Trianglelab
thingiverse
free
Trianglelab Bowden Clip by cobraroja
...trianglelab bowden clip by cobraroja
thingiverse
trianglelab bowden tube clip, 1.5mm thickness.
thingiverse
free
TriangleLab matrix DUCT V1 by kaluzaburza
...trianglelab matrix duct v1 by kaluzaburza
thingiverse
cooling duct for trianglelab matrix extruder/hotend
for fan blower 4020.
thingiverse
free
Trianglelab Matrix Extruder Liquid Cooled by pipersw
...elab matrix extruder liquid cooled by pipersw
thingiverse
a quick modelisation for the trianglelab matrix extruder liquid cooled
thingiverse
free
Trianglelab MiniMosfet holder
...ionality of the mosfet.
tl-minimosfet --> https://es.aliexpress.com/item/32864926764.html?spm=a2g0s.9042311.0.0.274263c0uq1wks
thingiverse
free
BLTouch Spacer for TriangleLabs Direct Drive
...t on the trianglelabs direct drive extruder kit. no need for springs. 4mm spacer. z probe offset of real bltouch is about 2mm.
thingiverse
free
trianglelab BMG Extruder motor fan mount by KraliCzech
...r motor fan mount by kraliczech
thingiverse
just my design of a simple fan mount for the trianglelab bmg extruder stepper motor.
thingiverse
free
Trianglelab Matrix Upgrade to Creality Ender 5 by Zuck
...of
https://www.thingiverse.com/thing:4031637
this is a kit for upgrading the ender 5 with a trianglelab matrix extruder.
enjoy!
thingiverse
free
Trianglelab QR Extruder Clamp
... stl files for it, i created one. it is not exactly the same shape, but it fits my extruder just fine.
print it with 100% infill.
thingiverse
free
Trianglelab dde-orbiter e3d V6 for Ender 6 by Druss0
...glelab dde-orbiter e3d v6 for ender 6 by druss0
thingiverse
adapter for creality ender 6 trianglelab dde-orbiter kit and e3d v6
thingiverse
free
Trianglelab Matrix - Anycubic i3 Mega by RomanKryvolapov
...trianglelab matrix - anycubic i3 mega by romankryvolapov
thingiverse
use 1% scale
Bondtech
thingiverse
free
x5s bondtech
...x5s bondtech
thingiverse
this allow using a bondtech dual drive on x5s machines
thingiverse
free
Bondtech mount by Nicoande99
...bondtech mount by nicoande99
thingiverse
custom bondtech mount for my velleman k8200 3d printer.
thingiverse
free
Trex2+ Bondtech adpter by fong504
...trex2+ bondtech adpter by fong504
thingiverse
bondtech makerbot 2 clone adapter for the trex2+.
thingiverse
free
Bondtech PTFE tube Holder
...bondtech ptfe tube holder
thingiverse
adjusted a bit to fit my bondtech clone.
thingiverse
free
Bondtech DDX by sebbzor
...of the ddx incase you want to build adapters for it. original stepfile can be found on bondtechs website, all credits go to them.
thingiverse
free
Support BONDTECH Anet_A8 By SergioFPV by SergioFPV
...support bondtech anet_a8 by sergiofpv by sergiofpv
thingiverse
support bondtech anet_a8
thingiverse
free
CR-10S-Bondtech-Mosquito_Mount_Bl_Touch by enoblk
...cr-10s-bondtech-mosquito_mount_bl_touch by enoblk
thingiverse
cr-10s-bondtech-mosquitomount-_bl_touch
thingiverse
free
Bondtech Flying mount by Yakandu
...du
thingiverse
lightweight flying extruder mount for the bondtech bmg with design centred around filament path.
this is a remix.
thingiverse
free
Bondtech Oiler by bamhm182
...t a piece of sponge and put it in the hole. oil it up and you're good to go! been using it for a few months with no problems.
thingiverse
free
RatRig V-Core Pro Bondtech Carriage (Prusa MK3S Bondtech Extruder)
...dtech can be mounted 1:1 :)
i have the mk3s with bondtech and mosquito magnum. i'll try out if my ratrig arrives...
have fun!
Bmg
turbosquid
$3
.50 BMG
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
.50 BMG
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
50 BMG Cartridge
...e 3d model 50 bmg cartridge for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1303035)
turbosquid
$30
Sniper 50 bmg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Cal 50 BMG
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$25
.50 BMG Cartridge3d model
...odel
cgstudio
.3ds .max .obj .wrl - .50 bmg cartridge 3d model, royalty free license available, instant download after purchase.
3d_export
$5
50 caliber BMG round 3D Model
...d 3d model
3dexport
50cal caliber 50 round bullet bmg cartridge browning rifle
50 caliber bmg round 3d model csw92 27660 3dexport
3d_export
$22
.50 BMG Cartridge 3D Model
...ectile rifle round pistol cartridge m2 hb 127x99mm nato browning barrett m82a1
.50 bmg cartridge 3d model plutonius 8091 3dexport
turbosquid
free
LAR Grizzly .50 BMG Sniper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$8
cartrige m50 bmg
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
E3D
turbosquid
$23
E3D - Google Home
... 3d model e3d - google home for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1192509)
cg_studio
free
e3d model
...e3d model
cgstudio
- e 3d model, royalty free license available, instant download after purchase.
turbosquid
$2
Syringe C4D (E3D Ready)
...lty free 3d model syringe c4d (e3d ready) for download as c4d on turbosquid: 3d models for games, architecture, videos. (1336720)
turbosquid
$12
Microphone USB E3D and C4D
...ree 3d model microphone usb e3d & c4d for download as c4d on turbosquid: 3d models for games, architecture, videos. (1568216)
turbosquid
$29
E3D - OnePlus 6 Black
...model e3d - oneplus 6 black for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1358534)
turbosquid
$29
E3D - Motorola One 2018
...del e3d - motorola one 2018 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1358533)
turbosquid
$29
E3D - Disney MagicBands 2
...l e3d - disney magicbands 2 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1355515)
turbosquid
$29
E3D - Samsung Z4 Smartphone
...e3d - samsung z4 smartphone for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1182179)
turbosquid
$23
E3D - Razer Phone model
...del e3d - razer phone model for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1231207)
turbosquid
$23
E3D - Alcatel Idol 5
... model e3d - alcatel idol 5 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1212799)
V6
3d_export
$100
v6 engine
...engine
3dexport
complete v6 engine modeled on solidworks 2017 along with .stl, .sldprt and .sldasm of all th parts and assembly.
3d_export
$10
V6 engine
... the first v6 engines were designed and produced independently by marmon motor car company, deutz gasmotoren fabrik and delahaye.
3d_export
$35
v6 engine
...s a complete model of a v6 engine containing over 400 components. you can contact me for a video of all the components assembling
3d_export
$10
v6 engine
...v6 engine
3dexport
turbosquid
$25
Bed1001-v6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$22
Chair2-v6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
V6.mb
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$20
V6 engine
...rovided in this package is all the parts in sldprt format and assembly in sldasm format. i can also convert the format on demand.
3ddd
$1
Стол V6
...6" в стиле дизельпанк изготовлен из блока двигателя, 4х поршней и 4х шатунов.
столешница изготовлена из стекла толщиной 8мм.
cg_studio
$199
V6 VVTi3d model
...v6 vvti3d model
cgstudio
.3ds - v6 vvti 3d model, royalty free license available, instant download after purchase.
Ender
3ddd
$1
Enders / Elegance
...enders / elegance
3ddd
обогреватель
уличный газовый обогреватель enders elegance
высота: 2200 мм
3d_export
free
ender 3 frame cavity covers
... of the creality ender 3 - makes it look a bit more attractive it just slides into the open channels of the aluminium framework
turbosquid
$1
pen support for ender 3
...y free 3d model pen support for ender 3 for download as blend on turbosquid: 3d models for games, architecture, videos. (1611282)
3d_ocean
$9
Ender Dragon Minecraft
...ojang obj poly videogames
ender dragon minecraft created with cinema 4d r15 formats included: max 2013 – fbx 2012 – c4d r15 – obj
3d_export
free
Creality ender enclosure webcam mount
...e creality enclosure. sure is better than a tripod. change it up if it helps. i printed pla with 50% infill on my dd ender 3 pro.
3d_export
free
ender 3 enclosure corners
...er corners and 4 upper corners, using 25mmx25mm angled aluminium pieces that gets covered on inside of the frame with plexiglass
3d_export
free
ender 3 3d print bed clips
...ed + normal aluminium bed frame of the creality ender 3 = 6mm (b) these clips are designed for glass plate + aluminium bed = 4mm
3d_export
$5
GRUMPY CAT
...grumpy cat 3dexport grumpy cat to print in ender ...
3d_export
$5
Logs fire
...with one multi material for corona and vray r ender. albedo, normal, uvmap, roughness format jpg 4096x4096 models:...
3d_export
$42
excavator
...is the original size. 0.12 mm printing surface creality ender5 ...
Direct
design_connected
free
Compas Direction
...compas direction
designconnected
free 3d model of compas direction by vitra designed by prouvé, jean.
design_connected
$18
Direction Pivotant
...direction pivotant
designconnected
vitra direction pivotant computer generated 3d model. designed by prouvé, jean.
turbosquid
$6
not direct the front
...oyalty free 3d model not direct the front for download as max on turbosquid: 3d models for games, architecture, videos. (1213034)
turbosquid
$10
Rails Direct
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Picto toilet directions
...lude 3d files next to rhino6: x3dv, step, igus, obj and stl. double-sided, flipping changes the gender directions to the toilets.
3ddd
$1
fauteuli direction
...d
chair , vitra , fauteuli
fauteuli vitra chair
design_connected
$18
Fauteuil Direction, 1951
...fauteuil direction, 1951
designconnected
vitra fauteuil direction, 1951 computer generated 3d model. designed by prouvé, jean.
3d_export
$5
Directional tactile 3D Model
...tactile 3d model
3dexport
directional tactile braille tile flooring interior
directional tactile 3d model renob000 71068 3dexport
turbosquid
$26
Radio direction finder A
...ty free 3d model radio direction finder a for download as fbx on turbosquid: 3d models for games, architecture, videos. (1212490)
turbosquid
$7
Wooden direction signage
...ty free 3d model wooden direction signage for download as max on turbosquid: 3d models for games, architecture, videos. (1453747)
Drive
turbosquid
$90
Drive
...turbosquid
royalty free 3d model drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1654393)
3d_export
$10
cycloidal drive
...cycloidal drive
3dexport
cycloidal drive
3d_ocean
$5
Flash Drive
...h drive included : – materials – scene ( lighs / room ) – .c4d + .obj for any questions please feel free to contact me thank you.
3d_ocean
$5
Usb drive
...s shaders and a lighting setup. it also has a small animation of it going in and out. i saved it out as both a .blend file and...
3d_ocean
$5
Pen Drive
...est computer drive game model good low poly new pen pen drive textured unwrapped uv very low poly
a very beautiful low poly model
3d_ocean
$10
External hard drive
... is a detailed model of a trekstor external hard drive. you can easily modify the label on the top. simply edit the text objects.
turbosquid
$60
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1254314)
turbosquid
$50
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1263524)
turbosquid
$45
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1287060)
turbosquid
$40
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1261902)
System
archibase_planet
free
System
...m
archibase planet
fire alarm system fire alarm box
security light system - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Spider system
...stem spider glass system
spider system to fix glass stefano galli n050912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Euforia System
...euforia system
3ddd
euforia
euforia system
3d_export
$50
Roof system Truss system 3D Model
...oof system truss system 3d model
3dexport
roof system truss truss stage
roof system truss system 3d model aleksbel 38970 3dexport
3ddd
$1
DVD System
...dvd system
3ddd
dvd , schneider
dvd system
design_connected
free
Seating system
...seating system
designconnected
free 3d model of seating system
3d_export
$5
solar system
...solar system
3dexport
solar system in c4d, with 8k nasa textures
3ddd
$1
Quanta System
...quanta system
3ddd
медицина
quanta system.
лазерное оборудование для медицинских центров
3d_export
$15
solar system
...nd the other the sun, the earth and the moon, the latter has an animation with camera movement included, the files are in spanish
3d_export
$14
missile system
...missile system
3dexport
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
3
turbosquid
$10
Mountain Bike 3 -3 of 3
...model mountain bike 3 (#3 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438752)
turbosquid
$6
Rock 3-3
...urbosquid
royalty free 3d model rock 3-3 for download as obj on turbosquid: 3d models for games, architecture, videos. (1628065)
turbosquid
$3
Genesis 3 Clothing 3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
hinge 3
...hinge 3
3dexport
hinge 3
3ddd
$1
Розетка 3
...розетка 3
3ddd
розетка
розетка 3
turbosquid
$50
is-3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Mountain Bike 3 -2 of 3
...model mountain bike 3 (#2 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438750)
turbosquid
$10
Mountain Bike 1 -3 of 3
...model mountain bike 1 (#3 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438743)
3d_export
$5
3 CATS
...3 cats
3dexport
3 cats pen holder
3ddd
free
3 Буфета
...3 буфета
3ddd
буфет , кантри
3 буфета