Thingiverse
eBike Brake Sensor Mount for Shimano Altus M355 by locnhinho
by Thingiverse
Last crawled date: 3 years, 3 months ago
eBike Brake Sensor Mount for Shimano Altus M355
Update: 1/2/2021: Update with a version to provide more adjustment. On one of the side, the distance was too less.
This is a remix from https://www.thingiverse.com/thing:4096724. Add a housing for the sensor as well as for the magnet.
Assemble instruction for the brake sensor:
Push in the sensor
Push in the sensor mount onto the Shimano brake from the lever side
Assemble instruction for the magnet mount:
Hot glue the bottom part to the brake lever
Move the magnet as required and put some play duo cay to fill up the remain slot (top and bottom)
Hot glue the top part to the brake lever
Add some hot glue where both piece are joined on the side closest to the bike handle bar
Printing instruction:
For the magnet mount, print two set
On the second set, mirrored them
Update: 1/2/2021: Update with a version to provide more adjustment. On one of the side, the distance was too less.
This is a remix from https://www.thingiverse.com/thing:4096724. Add a housing for the sensor as well as for the magnet.
Assemble instruction for the brake sensor:
Push in the sensor
Push in the sensor mount onto the Shimano brake from the lever side
Assemble instruction for the magnet mount:
Hot glue the bottom part to the brake lever
Move the magnet as required and put some play duo cay to fill up the remain slot (top and bottom)
Hot glue the top part to the brake lever
Add some hot glue where both piece are joined on the side closest to the bike handle bar
Printing instruction:
For the magnet mount, print two set
On the second set, mirrored them
Similar models
thingiverse
free
Bafang Hydraulic Brake Sensor Magnet mount for Shimano SLX M665 Brake Levers by osunick
...he mount means these secure to your levers without glue. place the sensor as seen in the photo and they should register properly.
thingiverse
free
Magnet Clip-On for Shimano BL-M315 Brake Lever by AZ360VR
...by az360vr
thingiverse
magnet clip on for hydraulic disk brake shimano bl-m315 and bafang mid motor
secure with some super glue.
thingiverse
free
Shimano Altus shifter lever bottom cover by Szcz3pan1
...t lost so i made this one. this is model for the right shifter, if you want the left one just mirror it in your slicing software.
thingiverse
free
Shimano Deore brake lever Throw Adjuster by Poiter
...djust the throw on the lever. after a quick design on onshape cad software it was set to glue into the lever and start using it.
grabcad
free
regen lever assemblied
...regen lever assemblied
grabcad
design of a bike/bicycle lever for regen braking working with a hall sensor and a magnet
thingiverse
free
Ebike PAS Sensor Mount by cbxbiker61
... your bottom bracket dimensions/offsets. ideally you will end up with a friction fit which is plenty good for this type of part.
thingiverse
free
Warcry Box by pyaniz
...ped the warcry logo, look at his awesome panel here https://www.thingiverse.com/thing:4485650 (gracias por el excelente modelo!!)
3d_export
$8
shimano xt-slx brake level piston guide right bottom
...rake lever with printed parts: i recommend: plastic - nylon / petg. rafts - yes. supports - yes. resolution - 0.16. infill: 100%
3d_export
$8
shimano xt-slx brake level piston guide left bottom
...brake lever with printed parts: i recommend: plastic - nylon / pet. rafts - yes. supports - yes. resolution - 0.16. infill: 100%
cg_trader
$6
TMNT Ooze Canister - Light up | 3D
...e leds . tmnt teenagemutantninjaturtles lamp light ooze canister lightup diy lighting toys props movieprop games games toys other
M355
thingiverse
free
Anet A6 LCD Display bright control by Paran0ic
...display mod to allow control brightness by gcode command m355ttp://marlinfw.org/docs/gcode/m355.html a modification is needed on display pcb and recompile...
thingiverse
free
Z axis brake by FrancescoF
...idea is to lock/unlock the lead screws with gcode m355 command, formerly fot case light but you can use...
3dwarehouse
free
Mesa Domo JMarcon
...x 1,30) (m354 - mesa domo 2,50 x 1,30) (m355 - mesa domo 2,70 x...
Locnhinho
thingiverse
free
Monticello by locnhinho
...the hall
increase the wall to 1.2mm
shift the dome to not touch the wall due to wall increase to 1.2mm
pull out the windows a bit
thingiverse
free
Castle by locnhinho
... top surface, extrude down to base
fix and enlarge the flag
inscribe "castle by alyssa ho 4th grade 2021" at the bottom
thingiverse
free
Protector for Polaris D30 UWF Quick Disconnect by locnhinho
...designed this to protect it from getting broken. if you want to buy one, look at this link https://www.ebay.com/itm/193622399518.
thingiverse
free
XT60 Replacement for DC2.1mm Hailong Case by locnhinho
...ject some hot glue into the two small holes
for the xt60 cover, get it from this one - https://www.thingiverse.com/thing:4793612.
thingiverse
free
Bafang Wire Housing for Bike Hand Bar by locnhinho
... look nice:
sand it with 240, 120, and 400
spray paint
included the fusion 360 file so that you can modify it for your fork size.
thingiverse
free
Polaris Wheel Nut by locnhinho
...replacement. see polaris 280 small wheel holder.stl and image attached. you will need an m5 hex nut as well as a longer m5 screw.
thingiverse
free
Ego Battery Adapter to XT60 by locnhinho
...solder. heat up the plate first add a blob of solder. then joint with the wire.
on the other end, solder to xt60 female connector
thingiverse
free
Raspberry PI Zero Camera Mount for Flying Bear P905 by locnhinho
... 50mm fan blower, it now touched the 50mm fan blower. as such, added second version to move the camera out by 0.5" or 13 mm.
thingiverse
free
Hailong Battery Mounting Plate by locnhinho
... repeat for the other two holes if required.
please note that there are two versions - one for 50mm frame and one for 40mm frame.
thingiverse
free
Dual mosfet for Flying Bear P905 by locnhinho
...rilla mosfet
you can use 3mm screw with nut to mount the bracket to the mosfet mounting plate. or use those computer disk screw.
Altus
turbosquid
$1
Altus
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$8
altus standard ceiling fan
.... dimensions: 52"/42" x 52"/42" x 11.7" - 23.2"h 132/106 cm x 132/106 cm x 11.7" - 23.2"h
3d_export
$8
altus flush ceiling fan
...cludes 8 variants of the model. dimensions: 52"/42" x 52"/42" x 13.6"h 132/106 cm x 132/106 cm x 35 cm h
thingiverse
free
Altus Grill Pin by Yari27
...altus grill pin by yari27
thingiverse
grill pin for altus 140 column speaker.
thingiverse
free
Altus Metrum Mini Case x2 by roytyson
...etrum mini case x2 by roytyson
thingiverse
this case with a lid will hold two each of an altus metrum mini or altus metrum timer
thingiverse
free
Dado Altus by racampos
...dado altus by racampos
thingiverse
this thing was made with tinkercad. edit it online https://tinkercad.com/things/jvsq2etbkff
thingiverse
free
Shimano Altus shifter lever bottom cover by Szcz3pan1
...t lost so i made this one. this is model for the right shifter, if you want the left one just mirror it in your slicing software.
thingiverse
free
Altus Metrum EasyMini model by GrouchoDuke
... and then updated the model. this version isn't perfect, but it's really close to the size of the easymini (version 1.0).
thingiverse
free
Rucksack buckle - "Rock lockster" (Altus and highlander) by smellymoo
...hup file to allow modification, some of the faces are inverted so send any modifications through a repair program (like netfabb).
Ebike
3d_export
$99
electric bicycle and station
...station 3dexport 3d model setup consisting of a triple ebike stand, with two electric bikes docked, accurately built.<br>file formats:<br>-.blend,...
3d_export
$99
electric bicycle and station black
...black 3dexport 3d model setup consisting of a triple ebike stand, with two electric bikes docked, accurately built.<br>file formats:<br>-.blend,...
3d_export
$99
electric bicycle and station red
...red 3dexport 3d model setup consisting of a triple ebike stand, with two electric bikes docked, accurately built.<br>file formats:<br>-.blend,...
thingiverse
free
Ebike battery case by Ale77
...ebike battery case by ale77
thingiverse
this is a case for an ebike battery.
thingiverse
free
ebike ANT BMS Cover
...ebike ant bms cover
thingiverse
ant bms cover for falcon ebike
thingiverse
free
EBike Housing by ronnie_maker
...from china which tends to have the same component suppliers. the openscad file is supplied if you want to add or remove sections.
thingiverse
free
V3 eBike headlight mount
...v3 ebike headlight mount
thingiverse
as per a few requests, this is the headlight mount i use on v3 ebike....
thingiverse
free
Fitifito ebike akku Schutzkappe by helisonnic
...fitifito ebike akku schutzkappe by helisonnic
thingiverse
fitifito ebike akku schutzkappe
thingiverse
free
electric light braket for ebikes by luifernandi
...electric light braket for ebikes by luifernandi
thingiverse
this bracket is for diy ebikes work is on progress
thingiverse
free
Chain Guard for Bosch ebike by Teofil
...chain guard for bosch ebike by teofil
thingiverse
chain guard for bosch ebike, active line
Shimano
3ddd
free
Shimano / Nexave
...тушка , рыбалка , снасти
катушка shimano nexave
turbosquid
free
Derailleur Shimano SiS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
shimano xt-slx brake level piston
...for 3d printing identity with the original = 100%. plastic - nylon. rafts - yes. supports - yes. resolution - 0.16. infill: 100%.
turbosquid
$12
Shimano XTR Cassette MTB
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Bycicle Front Shifter Shimano XTR
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$8
shimano xt-slx brake level piston guide right bottom
...rake lever with printed parts: i recommend: plastic - nylon / petg. rafts - yes. supports - yes. resolution - 0.16. infill: 100%
3d_export
$8
shimano xt-slx brake level piston guide left bottom
...brake lever with printed parts: i recommend: plastic - nylon / pet. rafts - yes. supports - yes. resolution - 0.16. infill: 100%
3d_export
$7
shimano xt-slx brake level piston guide right top
...ake lever with printed parts: i recommend: plastic - nylon / petg. rafts - yes. supports - yes. resolution - 0.16. infill: 100%.
3d_export
$7
shimano xt-slx brake level piston guide left top
...ake lever with printed parts: i recommend: plastic - nylon / petg. rafts - yes. supports - yes. resolution - 0.16. infill: 100%.
3d_export
$5
shimano xt-slx brake level free stroke adjustment right
...rake lever with printed parts: i recommend: plastic - nylon / pet. rafts - yes. supports - yes. resolution - 0.16. infill: 100%.
Brake
3d_export
$5
brake
...brake
3dexport
brake disk
turbosquid
$2
Brake
... free 3d model brake for download as blend, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1600351)
turbosquid
$19
Brakes
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
brake
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
Brake
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
brake
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
muzzle brake
...muzzle brake
3dexport
muzzle brake for large-caliber. not a real sample.
3d_export
$22
Brakes 3D Model
...brakes 3d model
3dexport
brakes disc support ventilated caliper brake disk wheel
brakes 3d model bayazoff 30362 3dexport
3d_export
$15
Brakes 3D Model
...brakes 3d model
3dexport
brake disk support caliper
brakes 3d model mackandco 33574 3dexport
3d_export
$10
brake-disc-brembo
...brake-disc-brembo
3dexport
brake-disc-brembo
Sensor
3d_export
free
parking sensor
...parking sensor
3dexport
car parking sensor
turbosquid
$1
Sensor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Smoke sensor
...port
smoke sensor, can be an impressive element for your projects. easy to use, realistic image, low polygon, quality materials.
3d_export
$5
Air Quality Sensor v1
...air quality sensor v1
3dexport
air quality sensor v1
3d_export
$15
float sensor
...e up render. - all parts and materials are logically named. other formats ================= - collada (.dae) - autodesk fbx - obj
turbosquid
$26
Wind sensor C
...free 3d model wind sensor c for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1328943)
turbosquid
$26
Wind sensor B
...free 3d model wind sensor b for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1328168)
3d_export
$5
ultrasound sensor
...ivers convert ultrasound into electrical signals, and transceivers can both transmit and receive ultrasound. export in: -obj -fbx
3ddd
free
Вытяжка Shindo pallada sensor
... вытяжка
вытяжка shindo pallada sensor. в двух размерах - 600 и 900. текстуры в комплекте.
turbosquid
$52
Wind sensor A B C
...
royalty free 3d model wind sensor a b c for download as fbx on turbosquid: 3d models for games, architecture, videos. (1408406)
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)