Thingiverse
Ego Battery Adapter to XT60 by locnhinho
by Thingiverse
Last crawled date: 3 years, 4 months ago
Ego Battery Adapter to X60 connector for ebike
This is a reminx from https://www.thingiverse.com/thing:2949738.
Assemble instruction:
Print the Ego adaptor
Print the Ego terminal blocker
Print the Ego mount
Create the terminal wire (see below)
Push in the terminal wire and then insert the "terminal blocker"
You can either glue or use screw to secure the Ego adapter to the Ego mount
Then remove the bike bottle holder and screw it in
To create the terminal:
Look for sheet metal
Cut two pieces (size 52.5 x 22.5 mm). To get the thickness, cut twice as long and then folder in half.
Solder two 12 gauge wires. Depend on your sheet metal, this may be a bit tough as they don't still to solder. First, sand the side that you going to solder. The negative terminal will be right side while the position terminal will be on the left side. Then, apply some solder flux as this will help to absorb the solder. Heat up the plate first add a blob of solder. Then joint with the wire.
On the other end, solder to XT60 female connector
This is a reminx from https://www.thingiverse.com/thing:2949738.
Assemble instruction:
Print the Ego adaptor
Print the Ego terminal blocker
Print the Ego mount
Create the terminal wire (see below)
Push in the terminal wire and then insert the "terminal blocker"
You can either glue or use screw to secure the Ego adapter to the Ego mount
Then remove the bike bottle holder and screw it in
To create the terminal:
Look for sheet metal
Cut two pieces (size 52.5 x 22.5 mm). To get the thickness, cut twice as long and then folder in half.
Solder two 12 gauge wires. Depend on your sheet metal, this may be a bit tough as they don't still to solder. First, sand the side that you going to solder. The negative terminal will be right side while the position terminal will be on the left side. Then, apply some solder flux as this will help to absorb the solder. Heat up the plate first add a blob of solder. Then joint with the wire.
On the other end, solder to XT60 female connector
Similar models
thingiverse
free
Worx to Ryobi battery mod by BrraaddK
...w and the printed spacer between the case and trimmer handle. glue the case so that it stays in place and does not rattle.
enjoy!
thingiverse
free
XT60 Hailong Battery Case Mount by locnhinho
...g 3mm or 1/8" drill bit, drill a second time.
insert the xt60 housing
using two m3 8mm length screw, screw in the two screws
thingiverse
free
18650 holder 1S / 2S
...make sure they are correctly oriented. 1s instructions follow similar steps as described in the2s construction, however: solder two...
thingiverse
free
XT60 connector saver protector by DiAleksi
...ector saver for direct mounting on board.
solder wires to connector first, then on board with firm tension.
inspired by armattan.
thingiverse
free
Wye cable assembly XT60 awg10 by CharlesAllix
...ingiverse
xt60 "y" connection jig.
insert two xt60 connectors, 10awg wires, solder connection and fill with hot glue.
thingiverse
free
Ridgid 18V battery to Craftsman 19.2V Tool adapter by xoanan
...f force to clip in.
the adapter can be removed by carefully prying around the edge of the adapter with a flat bladed screwdriver.
thingiverse
free
Parkside x20 to Makita 18V FIXED by GLoL
...cure the new terminals and just put the adaptor in its place,
by screwing again the body of machine its secured.
print supports !
thingiverse
free
QAV-X Charpu XT60 mount by doomkill
... by doomkill
thingiverse
xt60 batterie connector mount for qav-x frame.
to lock the xt60 after soldering and gauge use adhesive.
thingiverse
free
Zonestar Z6/Z6B Mods by mildw4ve
...ing iron and drill required)
30-40 fan adapter with optional t10 led bulb mount (t10 bulb and 2x m2 self-tapping screws required)
thingiverse
free
Ridgid 18V battery to Craftsman 19.2V Tool adapte by xoanan
...f force to clip in.
the adapter can be removed by carefully prying around the edge of the adapter with a flat bladed screwdriver.
Locnhinho
thingiverse
free
Monticello by locnhinho
...the hall
increase the wall to 1.2mm
shift the dome to not touch the wall due to wall increase to 1.2mm
pull out the windows a bit
thingiverse
free
Castle by locnhinho
... top surface, extrude down to base
fix and enlarge the flag
inscribe "castle by alyssa ho 4th grade 2021" at the bottom
thingiverse
free
Protector for Polaris D30 UWF Quick Disconnect by locnhinho
...designed this to protect it from getting broken. if you want to buy one, look at this link https://www.ebay.com/itm/193622399518.
thingiverse
free
XT60 Replacement for DC2.1mm Hailong Case by locnhinho
...ject some hot glue into the two small holes
for the xt60 cover, get it from this one - https://www.thingiverse.com/thing:4793612.
thingiverse
free
Bafang Wire Housing for Bike Hand Bar by locnhinho
... look nice:
sand it with 240, 120, and 400
spray paint
included the fusion 360 file so that you can modify it for your fork size.
thingiverse
free
Polaris Wheel Nut by locnhinho
...replacement. see polaris 280 small wheel holder.stl and image attached. you will need an m5 hex nut as well as a longer m5 screw.
thingiverse
free
Raspberry PI Zero Camera Mount for Flying Bear P905 by locnhinho
... 50mm fan blower, it now touched the 50mm fan blower. as such, added second version to move the camera out by 0.5" or 13 mm.
thingiverse
free
Hailong Battery Mounting Plate by locnhinho
... repeat for the other two holes if required.
please note that there are two versions - one for 50mm frame and one for 40mm frame.
thingiverse
free
Dual mosfet for Flying Bear P905 by locnhinho
...rilla mosfet
you can use 3mm screw with nut to mount the bracket to the mosfet mounting plate. or use those computer disk screw.
Ego
3ddd
$1
EGO
...ego
3ddd
ego
люстра ego bellart, высота: 35, диаметр: 80
3ddd
$1
Ego
... sinetica
кабинет ego от фабрики sinetica, италия.
в архиве - текстуры, стол письменный и шкаф с цветами.
3ddd
$1
Кровать EGO
...кровать ego
3ddd
ego , капитоне
кровать ego
3ddd
$1
EGO ZEROVENTIQUATTRO
...ego zeroventiquattro
3ddd
ego zeroventiquattro
ego zeroventiquattro
3ddd
$1
EGO
...ego
3ddd
ego
стол rodeo drive: d160xh76; стул burton. все текстуры приложены.
3ddd
$1
EGO chandelier
...ego chandelier
3ddd
ego
люстра фабрики ego zeroventiquattro артикул ls900
3ddd
free
Ego Zeroventiquattro
...ego zeroventiquattro
3ddd
стул. , ego zeroventiquattro
стул фирмы ego zeroventiquattro
3ddd
$1
Bonaldo Ego
...bonaldo ego
3ddd
bonaldo
bonaldo ego
3ddd
$1
EGO Abracadabra
... abracadabra
шикарный диван ego abracadabrahttp://www.egozeroventiquattro.it/schede_pdf/abracadabra.pdf
3ddd
free
Sinetica EGO
...
3ddd
стол , ego
sinetica industries коллекция ego стол руководителя с конференц столом.
Xt60
turbosquid
$1
XT60 plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
XT60 female connector
...lty free 3d model xt60 for download as 3dm, skp, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1537991)
turbosquid
$2
XT60 male connector
...ree 3d model xt60 for download as skp, 3dm, 3ds, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1538009)
3d_export
$10
connector xt60
...e designing, and will help save your precious time. the scale of the model is 1:1. the dimensions are for reference in the image.
turbosquid
$3
XT60 connector for Rc Electric bike
...ector for rc, electric bike for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1677842)
thingiverse
free
XT60
...hingiverse
a pretty accurate model of an xt60 connector
also includes an sy60 connector
fusion 360 file: https://a360.co/2pkar8r
thingiverse
free
XT60 Socket by singwanlew
...xt60 socket by singwanlew
thingiverse
xt60 socket
thingiverse
free
XT60 socket by cuckycz
...xt60 socket by cuckycz
thingiverse
xt60 male connector
thingiverse
free
XT60 Caps by Yashi_Fpv
...xt60 caps by yashi_fpv
thingiverse
xt60 caps for lipos
thingiverse
free
mount xt60 quadrocopter
...mount xt60 quadrocopter
thingiverse
mount xt60 quadrocopter
Battery
3d_ocean
$2
Battery
...battery
3docean
battery electronic
a high quality battery .
3d_export
free
battery
...battery
3dexport
battery
3d_ocean
$5
Battery
...battery
3docean
battery electronics
a classic 6 v battery, high poly with materials
3d_ocean
$3
Batteries
...batteries 3docean aa aaa batteries battery d electronics energy materials power subdivision uv unwrapped aa,...
3d_export
$19
Lead-acid battery storage battery lithium battery
...ttery storage battery lithium battery
3dexport
1.lead-acid battery storage battery lithium battery 2.files include 3dmax obj fbx
3d_ocean
$7
Battery Model
...battery model
3docean
big battery car battery vehicle battery
car battery, big battery, vehicle battery.
3ddd
free
battery energier
...battery energier
3ddd
battery energier , батарейка
battery energier
turbosquid
free
battery
...battery
turbosquid
free 3d model battery for download as obj on turbosquid: 3d models for games, architecture, videos. (1151676)
3d_ocean
$1
Battery Model
...lack minus plus white yellow
this is battery model is about 1000 triangles. turntable preview is smoothed version of the battery.
3d_export
$10
battery 18650
...battery 18650
3dexport
battery 18650
Adapter
3d_export
$10
Adapter 3D Model
...adapter 3d model
3dexport
adapter
adapter 3d model mur 20260 3dexport
archive3d
free
Adapter socket 3D Model
...dapter socket adapter
adapter socket n090211 - 3d model (*.3ds) for interior 3d visualization.
turbosquid
$400
cell adaptation
...
royalty free 3d model cell adaptation for download as blend on turbosquid: 3d models for games, architecture, videos. (1701655)
archive3d
free
Adapter 3D Model
...ups pc equipment
adapter extron n180813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$5
usb adapter
...royalty free 3d model usb adapter for download as ige and stl on turbosquid: 3d models for games, architecture, videos. (1582234)
turbosquid
$15
Power adapter
...free 3d model power adapter for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1510024)
turbosquid
$8
USB adapter
...e 3d model usb adapter for download as max, fbx, obj, and dwg on turbosquid: 3d models for games, architecture, videos. (1713542)
turbosquid
$30
adapter.3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Nokia Adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Universal adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.