Car Plastic Bag Trash Holder - For Sleeve Behind Passenger's Seat by YasNoiu

Last crawled date: 3 years, 1 month ago

About
A while ago I looked for a plastic bag holder for trash and all I could find were things that clip onto the back of the passenger's headrest. I didn't like the way that looked nor works (if it was full wouldn't it be noisy when it moves? Also hard to reach), so I made this. It rests on top of the sleeve some cars have behind the passenger's seat so the driver can easily reach behind and put trash in it.
This was made as a personal project and is only being uploaded in case anyone else wants to use it. It isn't perfect, so I included the Fusion 360 project file so that you can modify it if you want to change anything.
Printing
Print settings do not really matter as long as it is printed with some infill as even when full it won't be handling a lot of weight. I recommend printing it in the provided orientation, and if your bed is big enough you can print the pieces side by side.
Joining the pieces
There isn't any print tolerance on the pieces that wedge together because I got lucky and was able to wiggle my parts together for a tight fit. I suggest just printing it and sanding it down a little if you have trouble getting it together.