Black Magic Pocket cage / armor by Bram1982

Last crawled date: 3 years ago

This is a cage/armor for the BlackMagic Pocket Camera. Make sure you get good bed adhesion or else the edges might curl up a bit when printed in ABS. I recommend kapton tape + hairspray. Print at about 85% infill for added strength and use supports. Use a vile + sandpaper to clean up the print afterwards and give it an acetone vapor treatment for a pro look!
Add the 3/8th to 1/4th inch screw threads by screwing them in the designated holes. Its a tight fit and might take a while to get them all in, but that's the only way they are firmly secured in the plastic.
Features:
-One solid piece for added strength
-All 1/4 inch metal mounting screw holes.
-Cable locking for headphones / mic and HDMI cable (it locks the cables, but not the plugs)
-Removable handle with 1/4 inch metal mounting screw holes
-Anti-twist feature when mounting the camera and when mounting tripod plate underneath
-Works with available tripod quick release plates. For example the Manfrotto MN501-PL