Thingiverse
BigBox LCD Enclosure by robas
by Thingiverse
Last crawled date: 3 years, 1 month ago
BigBox LCD Enclosure.
The standard BigBox LCD enclosure is of course beautiful, but it has some flaws. In this design I improved some (if not all) of them:
the opening for the SD card is bigger, with rounded corners, making removal of the SD card easier.
There is a hole in the front of the panel, making it possible to (re)adjust the LCD contrast without taking apart half of the printer
I've added a hole for the reset button, now you can do an emergency stop without powering off the printer
Some other small improvements:
No more screws on the front of the panel, the hex screws are in the inside of the panel mount
I've added a bracket that prevents the bending of the LCD PCB when mounting the screws of the LCD panel.
A nice printable big knob on the front of the panel :-)
Parts needed:
4x M3 12mm screws for the LCD screen
6x M3 16mm screws for mounting the enclosure to the frame
The standard BigBox LCD enclosure is of course beautiful, but it has some flaws. In this design I improved some (if not all) of them:
the opening for the SD card is bigger, with rounded corners, making removal of the SD card easier.
There is a hole in the front of the panel, making it possible to (re)adjust the LCD contrast without taking apart half of the printer
I've added a hole for the reset button, now you can do an emergency stop without powering off the printer
Some other small improvements:
No more screws on the front of the panel, the hex screws are in the inside of the panel mount
I've added a bracket that prevents the bending of the LCD PCB when mounting the screws of the LCD panel.
A nice printable big knob on the front of the panel :-)
Parts needed:
4x M3 12mm screws for the LCD screen
6x M3 16mm screws for mounting the enclosure to the frame
Similar models
thingiverse
free
Front panel for MKS MINI12864 LCD by akiriwas
... this should be a drop in replacement for the old front panel. it has openings for the control knob, the button and the sd card.
thingiverse
free
Y-Axis Endstop Mount Front Side for CTC, Flashforge and similar by zumili
...d on the front side for the y-axis.
you need 2 m3 30mm screws and 2 m3 nuts. and you have to drill 2 holes inside the left plate.
thingiverse
free
RADDS case for D-BOT by printerboon
... hold two 40mm fans.
update: added a cover for a single 60mm fan. my (cheap) 40mm fans died, now i'm using a 60mm sunon fan.
thingiverse
free
Improved Full Graphic LCD Case and Dock - RepRap Discount Cradle Mount by jimustanguitar
...ot on the front... so i've incorporated the dimensions from a few different sources to try and fit a wider range of displays.
thingiverse
free
LCD display Prusa I4 enclosure by tittopower
... was made for semplify handle of sd card. it is assembled on the original holes of the printer with 4 through screws of 3 x 45 mm
thingiverse
free
Flashforge/CTC Control Enclosure by rdahm
... support is ymmv but my machine does the sd card slot bridge with no support/no issue. still working on a proper snap connection.
thingiverse
free
LCD smart controller Case by dmarett
...und together by m3 hex screws at each corner. there are two mounting holes on the bottom for binding it to a metal or wood frame.
thingiverse
free
Anet Full graphic Display holder with built in SD Card Extension Cable holder by Ragewizard
...hout sd version a8 style 2
-lcd back without sd version a6 & a8
update 13.05.2020:
added new part
-lcd_front-sd_version_am8
thingiverse
free
XYZ daVinci Jr - RepRapDiscount Smart Controller LCD 2004 by kr15_uk
...e. switch i had in my component draw already.
didn't bothered to trace usb cable hence all prints i did was from the sd card.
thingiverse
free
Anycubic Predator Slim Case + Mount by SkymasterCR
...them. i rebuilt the model in rhino, and also added additional openings for the sd card and usb plug that are stock on the panel.
Robas
thingiverse
free
TANTA ROBA necklace by bcs
...tanta roba necklace by bcs
thingiverse
tanta roba necklace
dimensions: 60x60x3,2 mm
thingiverse
free
Coffee cup holder by robas
... to print two nuts. first tighten one nut loosely, and tighten the second nut to the first nut, so it will function as a jam nut.
thingiverse
free
BigBox electronics cover fan by robas
...knob and the lid. you can find the hinges here: https://forum.e3d-online.com/index.php?threads/hinges-for-electronics-cover.1243/
thingiverse
free
Bigbox printing tools storage by robas
...it can hold 12 hot-end nozzles, both normal and volcano. there is a special place for a couple of pliers and a small wire cutter.
thingiverse
free
LCD and switch holder for a BigBox printer by robas
...5mm.
see also this thread on the bigbox forum:http://forum.e3d-online.com/index.php?threads/project-whisper-arduino-version.1135/
thingiverse
free
Dump bucket for BigBox printer with linear rail by robas
...rt# 272854781845).
3x m3 hex screw and nut
both the height of the cup brush and the silicone wiper are adjustable (see pictures)
thingiverse
free
7inch PanelDue screen case for BigBox by robas
...s.
parts used:
9x m3x6 hex socket self tapping screw
1x 20cm 40pin gpio ribbon cable
2x 40pin 2.54mm male single row header strip
thingiverse
free
Spinner Nestor Kirchner spinestor by fedegiron
...stor kirchner spinestor by fedegiron
thingiverse
ojo que se roba todo lo que ve.... y ve para todos lados lados al mismo tiempo!
thingiverse
free
Dismountable 3D printer enclosure by robas
...x side panel magnet holder
4 x roof panel bearer corner piece
4 x roof panel bearer middle piece
1 x fan protector (for 80mm fan)
Bigbox
thingiverse
free
BigBox Buddy - BigBox Contest Submit by FuzziGecko
... - bigbox contest submit by fuzzigecko
thingiverse
my entry to the bigbox contest
for some reason the thingiview isnt appearing!
thingiverse
free
BigBox BLTouch Mount
...bigbox bltouch mount
thingiverse
made this bracket to mount a bltouch to the ir sensor bracket of an e3d bigbox single extruder.
thingiverse
free
BigBox Bed Adjusters by autonumous
...bigbox bed adjusters by autonumous
thingiverse
bed adjusters for e3d bigbox.
thingiverse
free
BigBox Lcd Cover by Potti5
...bigbox lcd cover by potti5
thingiverse
cover for bigbox printer lcd hole
thingiverse
free
E3D BIGBOX Design Contest by Specter9
...e3d bigbox design contest by specter9
thingiverse
entry for the e3d bigbox design contest.
thingiverse
free
Little BigBox by xadow
...ld your e3d nozzles. print the opened version, it does not require supports and includes the hinges, just print, remove and fold.
thingiverse
free
BB - BIGBOX logo concept by woollyhat
...bb - bigbox logo concept by woollyhat
thingiverse
concept logo design for r/3dprinting competition, run by e3d bigbox.
thingiverse
free
BigBox Design Competition Submission by swartr
...on by swartr
thingiverse
submission to the bigbox design competition on reddit. the model is to be used as a calibration print.
thingiverse
free
e3d bigbox dual bowden plate by TheJubbez
...e3d bigbox dual bowden plate by thejubbez
thingiverse
e3d bigbox dual bowden plate
thingiverse
free
e3d BigBox Vertebrae by ChPech
...but to fit huge 2.3kg rolls of filament the vertebrae of the cable-spine are in the way.
these are vertebrae with more clearance.
Lcd
turbosquid
$20
lcd
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
LCD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
LCD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
LCD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
lcd
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
lcd
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
lcd
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
LCD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Noti Lcd Sofa
...noti lcd sofa
3ddd
noti , lcd
3d model of noti lcd sofa
3d_ocean
$7
Lcd tube wall
...hrome electronic electronic lcd tv videowall
lcd tube wall you can put in the lcd your own texture or movie in it and animate it.
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)