Thingiverse
Bearingless Kossel Carraige by mattshane
by Thingiverse
Last crawled date: 3 years ago
Didn't feel like spending money on linear bearings so I thought I would give this a try. They work pretty awesome.
These are being used with OPENBEAM extrusions so you might not have too much success with other brands.
Change #define DELTA_CARRIAGE_OFFSET to 18 and use the new top pieces if you only want to use one idler bearing on the belt. You can keep stock top piece if you use multiple idler bearings but you will get some binding at extreme height.
https://youtu.be/SZKkPdt6040
EDIT: I soaked them in vegetable oil for a little bit after printing and they run really smooth.
Should have stated originally this is for 1515.
These are being used with OPENBEAM extrusions so you might not have too much success with other brands.
Change #define DELTA_CARRIAGE_OFFSET to 18 and use the new top pieces if you only want to use one idler bearing on the belt. You can keep stock top piece if you use multiple idler bearings but you will get some binding at extreme height.
https://youtu.be/SZKkPdt6040
EDIT: I soaked them in vegetable oil for a little bit after printing and they run really smooth.
Should have stated originally this is for 1515.
Similar models
thingiverse
free
Direct Drive Extruder for E3D Idler with upper support Modification by darude
...he bearing holder, it breaking off, so i reworked the idler: added top support part.
to assemble this part you also need 5mm bolt
thingiverse
free
OB 1.4 Y idler by quicktony
...he back of the idler to allow the belt to wrap directly around. this clips in so no need to disassemble the printer to use this.
thingiverse
free
GT2 Guide For 625 bearing - two-piece by leodabague
...rating. so this a two-piece belt guide for your bearing.
simply print it at your standart settings and try it out on your reprap.
thingiverse
free
Lazy Susan bearing set by lgshort
... my bearings.
once again:
mount top piece to lazy susan.
mount bottom piece to base.
add bearings (5.0mm)
snap together, forever.
thingiverse
free
belt tensioner for rostock max by barnett
...and making it perfectly level. others have machined solutions similar to this, or used mirror clamps. i wanted to...
thingiverse
free
Belt Idler Pulley and Holder for X and Y Axis by BSkorn
...he idler pulley been changed from 50 to 70 degrees.
the most recent cad files are labled with rev1.0 in the end of the part name.
thingiverse
free
Self centering idler bearing for Y-axis belt. by Peter_I
... make a "crowned bearing" to use as an idler.
you have to be careful, but once it us done right, it works like a charm.
thingiverse
free
608 Bearing Idler - Adafruit Heatset Insert Press by wcarver1
...seful and you'd like to contribute to the development of future things, you can buy me a coffee at https://ko-fi.com/wcarver1
thingiverse
free
Y-Axis GT2 Idler by sdpaterson
... (24 mm) to secure the idler mount and gt2 together. the nut and bolt head are recessed a few mm to ensure a good solid fitting..
thingiverse
free
Idler belt pulley (easy print with seam optimization) by Mach0gr
...th with no bearings : 10mm
outside pulley with bearings installed : ~ 11.5mm
hope to save you some time and money in your project
Mattshane
thingiverse
free
MIni Baby Rattle by mattshane
...mini baby rattle by mattshane
thingiverse
baby rattle filled with rice, while printing, for my son.
thingiverse
free
Toy Rocket by mattshane
...ere is a version woth his name to demonstrate where the name can go. there is also a blank version.
https://youtu.be/yigll-ypuwe
thingiverse
free
Housing for Hobby King Multiwii and 9ch reciever by mattshane
...housing for hobby king multiwii and 9ch reciever by mattshane
thingiverse
small box for hobbyking multiwii pro
thingiverse
free
Echo Dot Wall Mount by mattshane
...hane
thingiverse
updated
thinner walls and about 1mm taller so echo fits flush.
added .stp file.
simple wall mount for echo dot.
thingiverse
free
DJI/Clone Leg Extensions by mattshane
...ne
thingiverse
some simple legs that fit really well on stock or clone dji arms from 450 or 550. needed them to clear my gimbal.
thingiverse
free
Hobby King Multiwii Pro Red Board Case by mattshane
...hobby king multiwii pro red board case by mattshane
thingiverse
nice tight case for hobby kings red multiwii pro.
thingiverse
free
DJI F550 Landing Gear Mount for 16mm Carbon Fiber Tube by mattshane
... carbon fiber tube by mattshane
thingiverse
simple but strong mount for using 16mm landing gear with dji f550 hex. not for f450.
thingiverse
free
350mm QUAD by mattshane
... out.
https://youtu.be/yrjfowtwuaa
added a new top plate we did last we to accommodate a non-3dr gps and some extra room inside.
thingiverse
free
Longer DJI arm allowing the use of 11inch props on the F550 hex. by mattshane
...ngiverse
longer dji arm allowing the use of 11inch props on the f550 hex.
added solidworks part in case anyone wants to mod it.
thingiverse
free
Remix of Clough42 Itty Bitty Extruder. by mattshane
...instead of a nema 14. it uses clough42 200mm gt2 loop belt avaiable at their website. http://clough42.com/product/200mm-gt2-belt/
Bearingless
3d_export
$15
Bell AH-1Z Viper
...the h-1 upgrade program. the ah-1z features a four-blade, bearingless composite main rotor system, uprated transmission, and a new...
thingiverse
free
Baseball bearingless fidget by Speedysloth88
...baseball bearingless fidget by speedysloth88
thingiverse
this is for fidgetters that love baseball.
thingiverse
free
Bearingless Fidget Spinner Remix by LuisDUgena
...erse
warning!!!! this is not working!!!
i wasn't able to print the original bearingless fidget spinner so i've remix it.
thingiverse
free
Spinner Bearingless by PotatoGambit
...nner bearingless by potatogambit
thingiverse
nice little spinner toy. drew up in cad and printed. it doesn't use a bearing.
thingiverse
free
Filaments support without bearing, bearingless (Atom 2.5) by bruesw
...ring, bearingless, improve original atom 2.5 filaments support and smoother curve of filament direction and rolloer when feeding.
thingiverse
free
Filament straightener bearingless by Hitchabout
...dy in play 4mm od ptfe tube throughout instead of bearings.or without a tube.
if it needs to be modifiedhttps://a360.co/2e3jpjy
thingiverse
free
Bearingless Fidget Spinner by CaseyJohnson
...extra mass. printed in protopasta carbon fiber filament, and it turned out very well.
https://www.youtube.com/watch?v=2cwy0jttvms
thingiverse
free
Bearingless Fidget Spinner by morris_lan
... but you might need to push the middle pin down when you remove it from the print bed. in order for it to spin. i hope you enjoy!
thingiverse
free
bearingless fingered y bar for mendel by jamesvilleneuve
...s good to go. i've tested it up to 120mm/s but it is reliable up past 70mm/s for those english like me that is around 160ipm.
Carraige
thingiverse
free
The prusa X Carraige that wont break by haxtormoogle
...e, i decided to fix this once and for all and make the most indestructable x carraige you can print in pla that ever concieved :)
thingiverse
free
CC-Carraige Remix for Cartesian
...ount for stepper rear plate mount - more solid then a single mount placement.
removed read fan mount
added titan aero part cooler
thingiverse
free
i3 Prusa Carraige Mounted Reel Tender by Ahnk
...i3 prusa carraige mounted reel tender by ahnk
thingiverse
printed using abs
thingiverse
free
FT-5 Carraige Chain Eliminator by FourDogs
...ngiverse
had issues with cable chains and it was a pain to fix wiring, so made this to use split loom for the extruder carriage.
thingiverse
free
Simple 40mm Fan Holder for Greg's X Carraige by RichAdlam
...for greg's x carraige, and couldn't find a suitable one, so i made my own in sketchup.
i hope it helps someone else too!!
thingiverse
free
Printrbot LV V2 - Z Carraige Re-design V1a The Box by daewootech
...printrbot lv v2 - z carraige re-design v1a the box by daewootech
thingiverse
messing about with different designs
thingiverse
free
Printrbot LC V2 - Z Carraige Re-design V1a The Silo by daewootech
...printrbot lc v2 - z carraige re-design v1a the silo by daewootech
thingiverse
messing about with different designs
thingiverse
free
FLsun QQ,QQ-s Rail carraige RESIZED by Masterjeff
...carraige resized by masterjeff
thingiverse
just my design of a insta360 go camera mount for the diatone tinawhoop. super simple.
thingiverse
free
Printrbot LC V2 - Z Carraige Re-design V1a The Sphere by daewootech
...printrbot lc v2 - z carraige re-design v1a the sphere by daewootech
thingiverse
messing about with different designs for fun.
thingiverse
free
Printrbot LC V2 - Z Carraige design V1 by daewootech
...
im not positive its is the z carraige, since it holds the x carraige rods, so im not sure what this is called, does anyone know?
Kossel
thingiverse
free
kossel bottom by keisukelin
...kossel bottom by keisukelin
thingiverse
kossel bottom
thingiverse
free
Leg for kossel by exelon
...leg for kossel by exelon
thingiverse
leg for kossel
thingiverse
free
Extruder for kossel by spencer_chen7
...extruder for kossel by spencer_chen7
thingiverse
extruder for kossel
thingiverse
free
Kossel parts by breezer83
...kossel parts by breezer83
thingiverse
kossel parts
thingiverse
free
Anycubic Kossel PID calibration
...ir mount:
kossel raspberry camera ir mount
extruder pid calibration.
simple extruder temperature calibration of your 3d printer.
thingiverse
free
Kossel Medium by flux83
...kossel medium by flux83
thingiverse
vertex for upgraded kossel mini
thingiverse
free
Kossel Mini by salesmendesandre
...kossel mini by salesmendesandre
thingiverse
custom kossel mini
frame 20x20
thingiverse
free
leg for kossel by ionulet
...leg for kossel by ionulet
thingiverse
leg for kossel with channel for end- stop cables
thingiverse
free
Optical Endstops Mounts for Kossel (with Better Kossel carriages) by dellfer
...stops on the anycubic kossel with better kossel carriages by codefreak https://www.thingiverse.com/thing:2501337
more precission
thingiverse
free
kossel??????? by wangrui19890704
...kossel??????? by wangrui19890704
thingiverse
??2020?2060???