8.3L & 11.3L Mini-ITX SFF PC Case

Last crawled date: 4 years, 2 months ago

Video about project: https://youtu.be/iKGNek3DkK4
My second case design, this one focused on required the fewest extra parts as possible. I already had a parts list in mind so this isn't the smallest I could make it, but had a few qualifications in mind.
1) Printable on regular 3D printers. Normal version was printed on an Ender 5, but the shorter version can print on an Ender 3.
2) Have as much as possible 3D printed. Other than case screws you shouldn't need any other pieces!
3) Print with zero supports. Hate removing them, so design around them.
4) Needed to hold an dual-slot GPU (280mm on the full-size case, ~170mm ITX card in the shortened version), 70mm CPU cooler, and SFX PSU. Only officially supports M.2 drives, but has space up front if you want to add HDD mounts.
5) Minimal Assembly. Prints in two parts which can be attached with case screws, though not needed.
Power Switch: https://ebay.to/2J4hE3L
Thumb Case Screws: https://ebay.to/2IRbRPX
There is space for 1 120mm fan (or 140mm fan with 120mm holes). I used this fan: https://ebay.to/2E3dUwc