Tinyboy 2 feet for 120mm fan by copylion

Last crawled date: 3 years, 4 months ago

Tinyboy needs more fans! (pun intended)
But yes existing 120mm fan feet(s) for Tinyboy 1 doesn't fit my gen 2, so I made these from scratch.
Print 2 each or print the X4 stl for all 4 in one place. 10% infill and .25 layer height.
Probably won't need screws but use M4x3mm nuts with screws if needed, 8mm/10mm screws if no fan covers installed. You can even add a 2mm fan cover in between (so you won't break another fan like I did).
Don't worry if the body panels are above the slots and can't fit into them, it is because 1) the screws of the bottom plate 2) the bottom plate bends outwards due to heat inside (that's why you need a fan!).