6 Cell Module Tray (Seed/Plug Tray) by wardy89 3d model
Warning. This content is not moderated and could be offensive.
m4
3dmdb logo
Thingiverse
6 Cell Module Tray (Seed/Plug Tray) by wardy89

6 Cell Module Tray (Seed/Plug Tray) by wardy89

by Thingiverse
Last crawled date: 3 years ago
This 6 cell module tray for starting your seeds, designed to be strong and sturdy so that i can be reused many times, with a large hole in the base to aid drainage and the easy removal of plug (plant) once the plant is ready for transplant. They also nestle together nicely for storage when not in use.
Cell size (Approximate): is 40X40X61mm
Overall tray size(Approximate): 124X83X63mm
For those in the states they are sizes so you should be able to fit 12 into a standard 1020 Flat.
Edit 27/3/21: I have now upload a second version with air pruning slots, Use the same print settings as the standard version but consider using a hight modify to increase the amount of infill on the lower section with air pruning slots.
Edit 30/3/21: added another version of the 6 cell tray, this version is square with bigger cells.
Cell size (Approximate): is 60X40X61mm
Overall tray size(Approximate): 124X123X63mm
Print Settings:
Layer Hight - 0.3
Perimeters - 1
Infill - 5-10% should be plenty
Support- None
Sugested Material- PETG, ASA

Tags