Thingiverse
Yet another enclosure for arduino uno/leonardo + ethernet shield + protoshield by b2vn
by Thingiverse
Last crawled date: 2 years, 12 months ago
I have tried quite a few of the arduino enclosures I have found here, but I found was really nice to get the arduino + ethernet shield + proto shield into. Therefore I came up with this design. When you take the top off, it's really open and it's easy to get the "sandwich" into the enclosure. And the top the snaps on easily.
I made version 1 my self, and found a few details that needed fixing. The main issue was the small bevel I have made where the top and bottom. It did not leave space for the through-hole mounted power plug on the leonardo, so I cut that out manually.
In version 2 (that I have not tried to print yet) I removed that small part of the bevel. I also made the sides just a mm longer, so the top part stays better in.
I have uploaded two version of the top part: One with perforated support caps over the holes, and one without. If you print the the perforate version, then it should be possible without support material.
Note: This enclosure fit the leonardo with the usb micro connector. One of my colleagues has baught two different arduino unos: one with usb A connector and one with micro usb. This enclosure fit the uno with the micro usb.
I made version 1 my self, and found a few details that needed fixing. The main issue was the small bevel I have made where the top and bottom. It did not leave space for the through-hole mounted power plug on the leonardo, so I cut that out manually.
In version 2 (that I have not tried to print yet) I removed that small part of the bevel. I also made the sides just a mm longer, so the top part stays better in.
I have uploaded two version of the top part: One with perforated support caps over the holes, and one without. If you print the the perforate version, then it should be possible without support material.
Note: This enclosure fit the leonardo with the usb micro connector. One of my colleagues has baught two different arduino unos: one with usb A connector and one with micro usb. This enclosure fit the uno with the micro usb.
Similar models
thingiverse
free
Arduino - Arduino+ shield enclosure by caltadaniel
...to fit with a standard arduino uno or with an arduino and a shield (i have tested it with an ethernet shield and works very well)
thingiverse
free
Arduino Case - Arduino UNO - Ethernet Shield & 8 Channel Relay by WernerFettke
... the top of the network shield that go to the relay pack are not too tall as this will interfere with the lid sliding on and off.
thingiverse
free
Arduino and Ethernet Shield Enclosure by Childs
...studio ethernet shield. you can fit a little something on the top which is why i have it a little taller than the uno and shield.
thingiverse
free
Laser cut Ethernet shield / Arduino enclosure by teabot
... measurements from an arduino uno board and a arduino ethernet shield v5.
made at the london hack space:
london.hackspace.org.uk/
thingiverse
free
Arduino LCD shield box
...arduino lcd shield box
thingiverse
arduino lcd display keypad shield enclosure case uno with usb mount hole only
thingiverse
free
Box arduino uno + shield ethernet by melarc
...box arduino uno + shield ethernet by melarc
thingiverse
box for arduino uno +shield ethernet
grabcad
free
Arduino UNO enclosure
... in the images is made by robottronic
arduino uno cad model link : https://grabcad.com/library/arduino-uno-r3-clone-full-detail-1
grabcad
free
Arduino Ethernet Shield 2
...arduino ethernet shield 2
grabcad
arduino ethernet shield 2 for arduino uno ou arduino mega.
thingiverse
free
Hinged Arduino Uno case + Ethernet + Any Shield - Upgraded by evenblan
...ed.
thanks laird for the design, and thingiverse to availabe the archive for print.
feel free to mod this desing, it's yours.
thingiverse
free
Arduino Uno Case - No Screws Needed by molds98
...
updates:
march 3 2014 - added stl for ethernet shield and top for it.
*note:
please make sure you flip the top when printing.
Protoshield
thingiverse
free
Arduino Uno with SparkFun Protoshield by CharlieCreations
...s for a pot and wires. it uses snapping catches to hold the board inside of it. i made it out of pla and the stiffness was ideal.
thingiverse
free
UnoPCB - Arduino Uno ProtoShield Circuit Board Breadboard by roha
...w.thingiverse.com/apps/customizer/run?thing_id=1534620you can customize your board (shield height, grid size, cable holder, ...).
thingiverse
free
Arudino Mega 2560 + Protoshield Box / Enclosure by FKOne
...sily and carefully screwed in. the arduino can be fixed with just one screw in the middle or if you like you can use more screws.
thingiverse
free
Replacement back for small adhesive breadboard by marmotjr
...decided to remove it. the adhesive came off the protoshield cleanly, but was destroyed in the process. the insides...
thingiverse
free
Laser engraver 190x190mm Full - 2 axis - Parts in STL by garzon3
...files are provided electronics: open source - arduino + protoshield + pololus software: grbl + inkscape + laserengraver plugin...
thingiverse
free
Arduino MEGA prototyping base by joeyC
...in. the stuff from sainsmart are located here: http://www.sainsmart.com/sensors/sensorkits/sainsmart-mega2560-r3-sensor-modules-starter-kit-for-arduino-uno-lcd-relay-mcu.html http://www.sainsmart.com/arduino/arduino-shields/sainsmart-prototype-shield-protoshieldv3-mini-breadboard-jump-wires-for-arduino.html http://www.sainsmart.com/iic-i2c-1602-yellow-green-for-arduino-uno-r3-mega2560.html i would recomend buy some extra f-f...
thingiverse
free
Arduino Radio Case by kleinsimon
...adafruit "music maker" mp3 shield https://www.adafruit.com/product/1788 3w/4ohm speaker arduino protoshield (for battery and connecting buttons etc) lithium battery charger...
thingiverse
free
Arduino/Android DRO Housing by jwags55
...you may notice from the photos, i used seeedstudio's protoshield (radioshack) and a bluetooth transceiver module from amazon. if...
thingiverse
free
Marker Rail 20x20 Arduino Prototyping Stand! by DIY3DTech
...board with syb-170 mini breadboard based for arduino uno protoshield (http://amzn.to/2w2rumu) which i ma using as its handy for...
B2Vn
thingiverse
free
Cap for spotmeter by b2vn
...cap for spotmeter by b2vn
thingiverse
a protective cap for a pentax digital spotmeter.
thingiverse
free
Sponge holder by b2vn
...sponge holder by b2vn
thingiverse
a kitchen sponge holder and a hook to hang it on the faucet.
thingiverse
free
150mm vise jaw by b2vn
...150mm vise jaw by b2vn
thingiverse
a vise jaw for a 150mm wide vise.
thingiverse
free
Peters Whiskey by b2vn
...or a present for a friend (named peter). i thought, is this is a rather common name, it might be that others would be interested.
thingiverse
free
Shampoo holder by b2vn
... a shampoo bottle to mount on top of a dornbracht hand shower outlet. the frame is 60x60mm just like the dornbracht rosettes are.
thingiverse
free
Hello World by b2vn
...hingiverse
just another hello world... what else could you print when you need to test you printer, being a software engineer..?
thingiverse
free
The Doppler Effect by b2vn
...y i proudly present to you: the printable doppler effect...
... as sheldon nicely graphicalized it for us in the big bang theory.
thingiverse
free
The Glencairn Glass by b2vn
...er reason than i could :) i tried them out with some friends, and the whiskey seem to work equally well from the printed glasses.
thingiverse
free
A loop by b2vn
...e hook often fell off when the band was not tight. therefore i decided to change the design to a loop/eye instead. so here it is.
thingiverse
free
Caps for cormelius kegs by b2vn
... by b2vn
thingiverse
the dust caps for the kegs has a tendency to go missing. this design fits both the co2 and the outlet taps.
Ethernet
3d_ocean
$16
Ethernet Cable
...ethernet cable
3docean
cable computer electronics ethernet internet network connected
ethernet cable 3d model
3d_export
$5
Ethernet 3D Model
...ethernet 3d model
3dexport
ethernet 3d model faisalx7 79155 3dexport
turbosquid
$40
Ethernet Card
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Ethernet Cable 3D Model
...ethernet cable 3d model
3dexport
ethernet cable internet lan computer connector
ethernet cable 3d model genkot27 92099 3dexport
3d_export
$30
Ethernet plugs 3D Model
... plugs 3d model
3dexport
ethernet cable patch network connection plug plugs eternet
ethernet plugs 3d model tartino 2170 3dexport
cg_studio
$30
Ethernet plugs3d model
...d model
cgstudio
.3ds .c4d .dxf .obj - ethernet plugs 3d model, royalty free license available, instant download after purchase.
turbosquid
$5
Double Port Ethernet Socket
...free 3d model double port ethernet socket for download as c4d on turbosquid: 3d models for games, architecture, videos. (1287464)
3d_export
$6
3D Models 8P8C RJ45 Ethernet connector 3D Model
...export
8p8c ethernet connector rj45 network computer plug
3d models 8p8c rj45 ethernet connector 3d model school73 77014 3dexport
3ddd
free
Интернет Кабель
...интернет кабель 3ddd интернет , кабель интернет кабель, ethernet cables polys: 13299 verts:...
3d_export
$35
RJ45 3D Model
...3d model 3dexport rj45 net nets rj-45 connection jack ethernet rj45 3d model deviacium 5819...
Leonardo
3ddd
$1
Leonardo it.
...leonardo it.
3ddd
дверь
leonardo it. дверь
3ddd
free
Leonardo Halmar
...leonardo halmar
3ddd
leonardo halmar , стул
кресло руководителя leonardo halmar
design_connected
$13
Leonardo
...leonardo
designconnected
santa & cole leonardo pendant lights computer generated 3d model. designed by antoni arola.
3ddd
$1
Leonardo
...leonardo
3ddd
leonardo
кухня леонардо
fbx - сгладить фасады и мойку
общее кол.полигонов около 320 000
turbosquid
$10
Leonardo
...alty free 3d model leonardo for download as max, max, and obj on turbosquid: 3d models for games, architecture, videos. (1537039)
3ddd
$1
GIROFLEX / LEONARDO
...giroflex / leonardo
3ddd
giroflex , кресло
офисное кресло leonardo фабрика giroflex
3ddd
$1
Bellavista Leonardo
... кофейный , круглый
кофейный столик bellavista leonardo
3ddd
$1
ASNAGHI INTERIORS LEONARDO
... leonardo , барный
стул для бара
asnaghi interiors leonardo
60 200 poly
3ddd
$1
leonardo da vinci
...leonardo da vinci
3ddd
всадник , лошадь
leonardo da vinci
turbosquid
$15
Leonardo chair
...uid
royalty free 3d model leonardo chair for download as max on turbosquid: 3d models for games, architecture, videos. (1422679)
Uno
3ddd
$1
FORMA / UNO
...forma / uno
3ddd
forma
кресло uno фабрики forma
3ddd
$1
Dellarovere UNO
...dellarovere uno
3ddd
dellarovere , стол
стол рабочий dellarovere uno (220x100x74)
3ddd
$1
DIAZ UNO GREEN
...diaz uno green
3ddd
meridiani
diaz uno green by meridiani
turbosquid
$1
Arduino UNO
...alty free 3d model arduino uno for download as , stl, and wrl on turbosquid: 3d models for games, architecture, videos. (1515932)
turbosquid
$25
zero uno
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
FORMA UNO
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
стеллаж Smania Eclectic-Uno
... smania , eclectic-uno
стеллаж smania eclectic-uno
turbosquid
$7
Uno board
...r download as 3ds, dxf, obj, xsi, wrl, fbx, dwg, dae, and skp on turbosquid: 3d models for games, architecture, videos. (1366181)
3d_export
$12
fiat uno s
...fiat uno s
3dexport
3d_export
$14
trames uno
...borán fastferry. it is modeled for the "accidentes marítimos" serie in youtube. v-ray rendering. formats: fbx, obj, mtl
Arduino
turbosquid
$7
Arduino
...turbosquid
royalty free 3d model arduino for download as max on turbosquid: 3d models for games, architecture, videos. (1197165)
turbosquid
$3
Arduino
...turbosquid
royalty free 3d model arduino for download as c4d on turbosquid: 3d models for games, architecture, videos. (1305484)
3d_export
$5
arduino satellite
...rt
this model is the exact arduino based satellite model with some basic sensors and camera modules and also includes batteries.
turbosquid
$1
Arduino UNO
...alty free 3d model arduino uno for download as , stl, and wrl on turbosquid: 3d models for games, architecture, videos. (1515932)
3d_export
$5
esp8266 box arduino
...esp8266 box arduino
3dexport
box for esp8266 module with wire hole. inside dimensions: 49x26 mm. height 15 mm.
3d_export
$60
Arduino Uno Rev3 Microcontroller 3D Model
...mega328p circuit board spark cable wire 5v 74v 9v 111v
arduino uno rev3 microcontroller 3d model danielgarnier4403 97237 3dexport
3d_export
free
arduino rover kit
...no!!! materials: no!!! rigged: no animated: no uv mapped: no it is not an exact copy of the original! not subject to 3d printing!
3d_ocean
$7
The housing for the 3d Printer
...the housing for the 3d printer 3docean arduino device housing stl the housing consists of two portions:...
3d_export
$5
arm 4 axis
...uno -4 servo motor 180° -3 joystick (x,y) for arduino -mdf wood -some wires -cnc laser cut...
3d_export
$5
solar tracker
...machine for the frame . list of material : -arduino uno -2 step motor with driver -4 ldr sensor...
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Shield
3d_export
$5
shield
...shield
3dexport
shield
3d_export
$5
Shield
...shield
3dexport
shield and a spear
3d_ocean
$6
Shield
...shield
3docean
game shield low polygon mei evil shild old shield shield
2048 texture obj,fbx,blend game ready.
3d_export
$5
Shield
...shield
3dexport
a shield that hasn't been made of materials will be available to everyone
3d_ocean
$4
Round Shield
...round shield
3docean
ancient battle fantasy knight medieval shield shields warrior
nice model of round shield.
3d_export
$5
shield
...shield
3dexport
old shield, damaged and covered in mold. every file have a zip folder in with textures.
3d_export
free
metal shield
...metal shield
3dexport
russian metal shield - anti-riot shield.
turbosquid
free
Shield
...shield
turbosquid
free 3d model shield for download as c4d on turbosquid: 3d models for games, architecture, videos. (1164800)
3d_export
$5
fire shield
...fire shield
3dexport
fire shield
turbosquid
$10
SHIELD
...
turbosquid
royalty free 3d model shield for download as obj on turbosquid: 3d models for games, architecture, videos. (1273553)
Another
turbosquid
$15
ANOTHER BATHROOM
...quid
royalty free 3d model another bathroom for download as on turbosquid: 3d models for games, architecture, videos. (1171460)
turbosquid
$24
Another World
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Another picnic table
... model another picnic table for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1426381)
turbosquid
$15
door to another world
...oor to another world for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1334842)
3d_export
free
another hacksaw
...another hacksaw
3dexport
. . . 3d model of a hacksaw. 3d model files: - 3ds max 2017 (scanline) - obj (low poly) . . .
turbosquid
$29
Furniture - "Another country" modern sofa
...another country" modern sofa for download as obj and c4d on turbosquid: 3d models for games, architecture, videos. (1186189)
3d_ocean
$29
Another Tron Light Cycle with the Rider and Trail
...ther tron light cycle with the rider and the light trail. high quality 3d model,all the materials and lights are included. the...
3d_export
free
Download free Another alien 3D Model
...n 3d model
3dexport
alien head zbrush max scifi space monster character creature
another alien 3d model costorella 94130 3dexport
turbosquid
$29
Furniture - Day bed one "Another country"
...d one "another country" for download as obj and c4d on turbosquid: 3d models for games, architecture, videos. (1184703)
3d_export
free
Crate low - poly game ready or another project
...but no texture. you can edit it by adding your own custom texture to your model.<br>>>this model was made in blender.