Thingiverse
X5S Single Z motor by simonvez
by Thingiverse
Last crawled date: 3 years, 1 month ago
You will need :
-Belt: GT2 belt. 1220mm
-2020 extrusion : 460mm
-2020 Corners to attach the 460mm 2020 extrusion in the midle. I used these: https://www.thingiverse.com/thing:2771055
-M5 20mm to 30mm screws (what ever you have) for the bearings
-Some Tnuts M4 and M4 small screws
-2X 60T GT2 pulleys
-2 X 625 bearings that you mount with M3 screws directly on the motor itself.
-4 X big washers for the 625 bearings to hold the belt in the path
-6 X small washers for the 625 bearings. (2 in between each big washer) and 1 on top for the M3 screw
-Retune your Marlin for 1200steps/mm (or adjust in eeprom)
re-use the top Z bearing at the bottom. No need for bearing up top
2 X 500m 8mm threaded rods
Optional but recommended for regidity:
Z brace.stl
Middel 2020 brace.stl
2020 brace.stl
-Belt: GT2 belt. 1220mm
-2020 extrusion : 460mm
-2020 Corners to attach the 460mm 2020 extrusion in the midle. I used these: https://www.thingiverse.com/thing:2771055
-M5 20mm to 30mm screws (what ever you have) for the bearings
-Some Tnuts M4 and M4 small screws
-2X 60T GT2 pulleys
-2 X 625 bearings that you mount with M3 screws directly on the motor itself.
-4 X big washers for the 625 bearings to hold the belt in the path
-6 X small washers for the 625 bearings. (2 in between each big washer) and 1 on top for the M3 screw
-Retune your Marlin for 1200steps/mm (or adjust in eeprom)
re-use the top Z bearing at the bottom. No need for bearing up top
2 X 500m 8mm threaded rods
Optional but recommended for regidity:
Z brace.stl
Middel 2020 brace.stl
2020 brace.stl
Similar models
thingiverse
free
Y belt tensioner for 2020 and 2040 aluminum extrusion by FFranzmann
...f prusa and haribo mod designs
you need to drill a hole for the m4 in your extrusion
added a version for 2020 although untested.
thingiverse
free
Redesigned K8200/3Drag V1 by JPreinitz
...the backlash on (z_holder_endstop.stl) and (z_holder.stl).
nema 17 stepper motor.
m8 threaded rod.
coupler
gt2 belts and pulleys.
thingiverse
free
Z belt tensioner - adjustable by thicc_nugget
... the tensioner on a 2020 aluminum profile and a longer m3 screw, some nuts and (if necessary) some washers to fix the gt2 pulley.
thingiverse
free
Dual GT2 Belt Driven Z Axis for Hypercube by n9jcv
...or placement of pulleys (i just printed plastic washers not critical).
again i am 100% happy with the performance of the z now.
thingiverse
free
Redesigned K8200/3Drag V2, Build volume 200x200x300 mm by JPreinitz
...the backlash on (z_holder_endstop.stl) and (z_holder.stl).
nema 17 stepper motor.
m8 threaded rod.
coupler
gt2 belts and pulleys.
thingiverse
free
Piper 2 Sub 500mm Z belt drive by catspider
...ings
1 motor coupler
2 washers to act as spacers between the pulley and bearing and motor coupler and bearing.
1 160mm gt2 belt.
thingiverse
free
Belt-and-pinion for a standard NEMA motor by tamarintech
...)
2 x 608 bearings
(optional) metal washers to use in place of the printed ones and for securing the whole thing to the motor
thingiverse
free
My flsun i3 2017 upgrade by Sjekkie
...d the z-motor-bearing-holder. +nuts
8 screws m4 x 10mm for the z_botom_bracket. +nuts
8 screws m3 x 10mm for the lead screw nuts.
thingiverse
free
Micromake C1 main belt tensioner by Lapinoo
...ded to allow to put a gt2 idler instead, which is wider than the bearings).
for the holder assembly
4x m3x10 screws
4x m3 t-nuts
thingiverse
free
GT2 guide for 625 Bearing by Gummibaer
...gt2 guide for 625 bearing by gummibaer
thingiverse
gt2 guide for 625 bearing.
you need 2 parts for each bearing.
Simonvez
thingiverse
free
Black&Decker pole extension 20V tools by simonvez
...e the wires so you dont drill them) with a drill bit that is is bit bigger than the m4 screw)
9-assemble again and enjoy trimming
thingiverse
free
Glock Carbine kit (Airsoft) by simonvez
...w.youtube.com/watch?v=ma6n4fnt-nshttps://www.youtube.com/watch?v=qppiqgrypz8https://www.youtube.com/watch?v=v8do07alpl8&t=17s
thingiverse
free
X5S Z support System and bed lowering by simonvez
...he m4 screws so they dont "grip" in the holes
3-added a 12mm smooth rod design in case someone wants to upgrade to 12mm
thingiverse
free
X5s Board cover by simonvez
...vez
thingiverse
just a normal cover for the electronic board. nothing special. just to add some custom stuff to your lovely x5s.
thingiverse
free
E3D v6 5015 fan mount for Volcano by simonvez
...t design by chito for the his e3d mount and cooler. this is for a 5015 fan. it has longer duct for the volcano edition of the e3d
thingiverse
free
Tronxy X5S FRS (Filament Runout sensor) by simonvez
....
switch i have used: kuman switcheshttps://www.amazon.ca/gp/product/b06xsbyq8h/ref=oh_aui_detailpage_o00_s00?ie=utf8&psc=1
thingiverse
free
X5S Z belt tentioner - Sync by simonvez
...rse.com/thing:2822858 (or use any bearing of your choice)
-2 m5 40mm to hold the bearings
2 m5 nut to push in the bearing holder
thingiverse
free
E3D Hurricane height adjustable by simonvez
...hing: https://www.thingiverse.com/thing:2494642
this will fit with the stock 30mm e3d fan.. but you can also put a 40mm fan mount
thingiverse
free
Raspberry Pi Camera case mount x5s by simonvez
...s missing some parts to it. i created the 2020 mount, and the 35mm arm and modified a couple things to have a great fit on my x5s
X5S
thingiverse
free
Astrox X5 / JohnnyFpv Frame Gopro 8 ND Filter by DoneFpv
...int in tpu 110 flujo 20% de relleno.
impreso a 0.20
imprimir de costado con el lado recto de la montura en la placa de impresión.
thingiverse
free
Tronxy X5S Z level Modified by StudioForge
... per side could make the bed not even front to back so i designed this up. just print out two of these and you should be all set.
thingiverse
free
Flight Rudder (yaw) pedals for the PS4 DualShock Joystick HOTAS / HOSAS by jpnurro
...yaw pedals for akaki's hotasset. with the bigger printer (x5s you can print the platform body as a one...
thingiverse
free
PrusaSlicer profile for Easythreed X1 + extensive explanation of each setting by JacekJagosz
...k this is good enough for people to use.
even though this is first release i call it v2, because it is my second major iteration.
thingiverse
free
Tronxy X5S rotating extruder arm by antosha99
... it.
i included also a filament guide to be installed on top of the arm and a guide to be placed on the motor for better balance.
thingiverse
free
Hictop Tenlog D3 mount for MakerTech3D DSE by mrmikejackson
....thingiverse.com/thing:4613204
being tested for use by https://www.makertech3d.com/products/dual-switching-extruder-non-proforge
thingiverse
free
Creality CR-6 SE Power Off Autoswitch by ThingsDesigner
...er einfach ebenfalls einschalten und der drucker bleibt immer an.
ich hoffe, diese simple lösung gefällt und findet viele nutzer.
thingiverse
free
sma puda x5 foxeer lollipop v3 by Blackfish_FPV
...sma puda x5 foxeer lollipop v3 by blackfish_fpv
thingiverse
sma puda x5 foxeer lollipop v3
thingiverse
free
puda x5 frsky XM + cover by Blackfish_FPV
...puda x5 frsky xm + cover by blackfish_fpv
thingiverse
puda x5 frsky xm + cover
thingiverse
free
puda x5 batt place by Blackfish_FPV
...puda x5 batt place by blackfish_fpv
thingiverse
puda x5 batt place
Single
thingiverse
free
Spooky Bush Eyes by B_Dubb42
...bushes! frame and eye pieces are printed in a single color, and a "diffuser" piece is printed in any...
thingiverse
free
Single Streamdeck Desk Clamp Mount by SetupPrinting
...me can be mounted either way to have it either above or below desk level. you will need three m4x25 screws and nuts for assembly.
thingiverse
free
EASY PRINT NEJE laser tester module mount V1 by JohnCorreia
...in another way. the board is affixed with a single zip tie and is wedged under the three bezel...
thingiverse
free
kevin smith by theblackspyder
...kevin smith by theblackspyder thingiverse dx5c single hand...
thingiverse
free
Retractable Bicycle Mirror Holder by BotLawson
...both nylock nuts are in hexagonal pockets so a single 2.5mm allen key should be all the needed tools....
thingiverse
free
Hanging Wall Photo Grip Clip by qJake
...can chain them together and hang them from a single nail. some notes / ideas: i've hung (dangled?) up...
thingiverse
free
Undermount Modular Wine Glass Holder by ddaann99
...undermount modular wine glass holder by ddaann99 thingiverse a single modular undermount glass holder. looking over the multitude of...
thingiverse
free
Largueur simple ou pince pour FIMI A3 / Single width or clamp for FIMI A3 by patric123
...everse the servo on its support to switch from width to gripper
the clamp comes from: https://www.thingiverse.com/thing:3247600
.
thingiverse
free
Firefighter coaster by RaimonElctrncs
...i have printed this model in multi-color, with a single extruder. it is also possible to print this model...
thingiverse
free
Single Eppendorf micro tube holder/foot by cannon3d
...1.5ml eppendorf micro tube. it can be used for example to recalibrate a micropipette with the use of water and a precision scale.
Z
thingiverse
free
Twisted box by jamcultur
...the box. i also recommend that you place the z seam on the inside of the piece, especially if...
thingiverse
free
Sidewinder X1 Bowden holder by CRYSIS-FPV
...x1 if you are running the sidewinder x1 - z brace by double_mirages it will help as i run...
thingiverse
free
Wifi Switch Box Extension by GingerBrandon
...can make it deeper or shallower by changing the z height in your slicer. i printed mine in abs,...
thingiverse
free
Artillery SWX1 z Sensor ajustable by MadMaxXxQc
...bber band for keep the sensor straight. hole on the sensor support is smaller (0.050mm) to avoid sensor moving or being too loose
thingiverse
free
Tronxy X5S Z level Modified by StudioForge
... per side could make the bed not even front to back so i designed this up. just print out two of these and you should be all set.
thingiverse
free
low profile sliding laptop camera cover by Dook97
...height 0.4mm line width 10mm/s printing speed retraction enabled zaxis hop on retraction...
thingiverse
free
Camera holder Lazer Rafale sr z-line by John_Hanibal
...fale sr z-line by john_hanibal
thingiverse
just my design of a insta360 go camera mount for the diatone tinawhoop. super simple.
thingiverse
free
Watch Link Bracelet by lcbv
...with x and y shrunk down to 50% and z at...
thingiverse
free
Support Z - sapphire plus by rodrigocnc
...t z - sapphire plus by rodrigocnc
thingiverse
support for sapphire z axis, i used mr128-zz mini bearing (8x12x3,5) and m4 screw
thingiverse
free
Biqu B1 3D Touch Mount (for older clones) by ntdesign
...just moved everything up by 3mm, now it fits. z offset is -0.65 on my printer. just tested this...
Motor
thingiverse
free
Motor Bumper Iflight xl5 V2 Nazgul 5 by DoneFpv
...r bumper iflight xl5 v2 nazgul 5 by donefpv
thingiverse
motor bumper arm mount for the nazgul and the iflight xl5
print in tpu.
thingiverse
free
Prusa i3 Nema17 Extruder Motor Heatsink Clamp by Revenson
...he heatsink.
pictured are standard 40x40mm aluminum heatsinks with thermal adhesive: https://www.amazon.com/gp/product/b07d4fvc61
thingiverse
free
C20 motor 10x10 profile motor mount + parts Quad by TurboCinqy
...t;quad from ply. is also printable if your printer is big enough.
will update this thing later.
c20 motor
10x10 aluminium profile
thingiverse
free
Rotogate by MyqM
...metre workshop for details of construction.https://youtu.be/iv7r5wy3ltq uses a geared motor to rotate the...
thingiverse
free
RC GearBox Double motor 550 gear metal by TB_3D
...s/tb3d/creations
myminifactory : https://www.myminifactory.com/users/tb3d
thingiverse : https://www.thingiverse.com/tb_3d/designs
thingiverse
free
Auger Dispenser by BasementCreations
...it very well. it uses small n20 high torque motor and plastic pipe with smooth surfaces(26.6mm outside diameter, 22.6mm...
thingiverse
free
reducer for motor 100w by SHS_
...reducer for motor 100w by shs_
thingiverse
a set of gears for making a reducer. number of teeth 55 and 11. bearing support 608.
thingiverse
free
Vixen GP Goto Conversion Using Meade DS Motors by wt808
...ing autostar goto functionality to your existing telescope", christopher ericksonhttp://data-plumber.com/autostarupgrade.htm
thingiverse
free
TWIN by JoHuVo
...leider habe ich noch nicht den passenden gefunden. deshalb motorausch auf v-spec 1808 - 2400kv - mit einem 5045...
thingiverse
free
Prusa i3 MK3 PiCam v2 X-Axis Motor Mount REMIX - With Diffuser by jppowers
...b led strips this time around: https://smile.amazon.com/gp/product/b07nwfvry4/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1