Thingiverse
Strix StratoSurfer Parts v1 by markqv
by Thingiverse
Last crawled date: 3 years, 1 month ago
UPDATE - 27 Feb 2018
I have removed the motor mount from this collection because the design of the foam cowl it attaches too will not support the offset power and mass. Please see the "Power Set-up" section of the build page linked below for more information.
Build page:http://www.itsqv.com/QVM/index.php?title=Strix_StratoSurfer
There are more parts available on my Stratosurfer parts catalog page found here:http://www.itsqv.com/QVM/index.php?title=Parts_Catalog_-_Strix_Stratosurfer
I decided to try something different and having never gone down the Bixler style road (well except for a Penguin), the Strix StratoSurfer seemed like a good place to start. Also, after reading much about this plane, I decided to start with a larger motor/prop combo.
Here then is a collection of parts I did for the first build of this airframe.
General print notes:
All parts were printed in PushPlastics ABS filament
Motor mount and front & rear skids are printed at 80% infil, all others are 20-40%
Print orientation is dependent on printer/slicer set-up, please rotate if necessary
I have removed the motor mount from this collection because the design of the foam cowl it attaches too will not support the offset power and mass. Please see the "Power Set-up" section of the build page linked below for more information.
Build page:http://www.itsqv.com/QVM/index.php?title=Strix_StratoSurfer
There are more parts available on my Stratosurfer parts catalog page found here:http://www.itsqv.com/QVM/index.php?title=Parts_Catalog_-_Strix_Stratosurfer
I decided to try something different and having never gone down the Bixler style road (well except for a Penguin), the Strix StratoSurfer seemed like a good place to start. Also, after reading much about this plane, I decided to start with a larger motor/prop combo.
Here then is a collection of parts I did for the first build of this airframe.
General print notes:
All parts were printed in PushPlastics ABS filament
Motor mount and front & rear skids are printed at 80% infil, all others are 20-40%
Print orientation is dependent on printer/slicer set-up, please rotate if necessary
Similar models
thingiverse
free
Strix Stratosurfer - Small Canopy by markqv
...signed to be printed right-side-up, as it sits on the plane.
the canopy shown in the pictures was printed in abs at .2mm quality.
thingiverse
free
Zeta Phantom FX-61 Parts v1 by markqv
...re: http://www.itsqv.com/qvm/index.php?title=zeta_fx-61_phantom_wing_number_2
all parts were printed in pla.
happy printing!
mark
thingiverse
free
X-UAV Mini Talon Parts v1 by markqv
...fpv_model
designed and printed in pla
more mini talon parts!http://www.itsqv.com/qvm/index.php?title=mini_talon_parts_compilation
thingiverse
free
Mini Talon nose with/without pitot for Runcam Split Micro Pan/Tilt by CrunkleFloop
...ounting plates for the canopy can be downloaded from here - http://www.itsqv.com/qvm/index.php?title=mini_talon_parts_compilation
thingiverse
free
X-UAV Mini Talon Parts v3 by markqv
...to angle the mount at 4 degrees down.
more mini talon parts!http://www.itsqv.com/qvm/index.php?title=mini_talon_parts_compilation
thingiverse
free
Mini Talon Gopro Session mount for itsqv canopy.
...qv canopies (http://www.itsqv.com/qvm/index.php?title=parts_catalog_-_mini_talon)
printed in tpu - .2mm - on side with supports.4
thingiverse
free
Mini Talon HS1177 Mount fot ItSQV.com Canopy by NorCAL3D
... had about 3mm of adjustment each way to get the front lined up with hte canopy, depending on what lense you have on your camera.
thingiverse
free
Matek F405-wing top cover with BN-220
....itsqv.com/qvm/index.php?title=parts_catalog_-_general_parts#matek_f405-wing_cover
i just made a cover for gps and test fit good,
thingiverse
free
Stratosurfer FPV + session canopy by aalbinger
...known to work.
as with all gopro mounts make sure that area is strong enough to hold up as the gopro hinge is pretty darned thin.
thingiverse
free
STRIX StratoSurfer Motor Mount by xtrmtrk
...ake sure your shaft clears the space for it inside this mount. if there's any rubbing and friction you'll have problems!
Stratosurfer
thingiverse
free
Stratosurfer GoPro Hero7 and dual FPV camera mount by kdamon
...amon
thingiverse
mount i made to hold a gopro hero7, a foxeer micro camera, and dji camera on a servo os they're all on pan.
thingiverse
free
Stratosurfer Horizontal Tail Support by AxionZ
...e6000 or equivalent adhesion material.
-pick up hole on fuselage and install m3 mount bolt through fuselage and into the support.
thingiverse
free
Stratosurfer GPS Mount by AxionZ
...urfer.https://www.readymaderc.com/products/details/rmrc-mini-gpshttps://www.racedayquads.com/products/micro-ublox-m8n-gps-glonass
thingiverse
free
Strix Stratosurfer - Small Canopy by markqv
...signed to be printed right-side-up, as it sits on the plane.
the canopy shown in the pictures was printed in abs at .2mm quality.
thingiverse
free
Strix Stratosurfer camera mount by tfmccull
...other cam with a standard 1/4" mount. thin layer of goop or similar on the top will prevent the camera from slipping around.
thingiverse
free
STRIX StratoSurfer Motor Mount by xtrmtrk
...ake sure your shaft clears the space for it inside this mount. if there's any rubbing and friction you'll have problems!
thingiverse
free
Strix Stratosurfer wood tray by raptor_demon
....1mm was too much on my laser. so i you are 3d printing these you might need wider slots.
it is slightly too long for a k40 laser
thingiverse
free
Stratosurfer FPV + session canopy by aalbinger
...known to work.
as with all gopro mounts make sure that area is strong enough to hold up as the gopro hinge is pretty darned thin.
thingiverse
free
Strix Stratosurfer canopy by tfmccull
...se with m3 hardware. optional support stl for additional bracing/mounting options. opening for sma connector on left side. enjoy!
Markqv
thingiverse
free
Parametric Folding Prop Stop Insert by wbu42
...as said above, the design is completely stolen from markqv all credits to him. also have a look at...
thingiverse
free
Mini Talon nose with/without pitot for Runcam Split Micro Pan/Tilt by CrunkleFloop
...pan/tilt by crunklefloop thingiverse based on the nose by markqv (http://www.itsqv.com/qvm/index.php?title=mini_talon_parts_compilation) i changed it slightly to fit this pan/tilt...
thingiverse
free
Mini Talon twin motor pod conversion by Yannicflight
...3.17mm axles to fit the d2830/11 motors. thanks to markqv for the original idea to turn this pusher into...
thingiverse
free
C1 Chaser Flight controller deck remix by chris24ed
...controller deck remix by chris24ed thingiverse remix of the markqv c1 fc deck with 30.5mm and 20mm hole spacing....
thingiverse
free
Mini Talon Belly Cover by Mochanic
...mini talon belly cover by mochanic thingiverse thanks to markqv#39;s preliminary design, together we bring you a belly cover...
thingiverse
free
HooptieJ's OneUp and TwoUp Extruder Housing *Updated Files 8/19* by HooptieJ
...uses completely different extruder tension springs and hardware- the markqv and the "v8" and the 3up use the old...
thingiverse
free
X-UAV Talon Rear Skid by markqv
...ing bed
overhang angle - 70 degrees
support infill - 12%
print speed - 40mm/sec
print density - 65% or higher
target weight - 16g
thingiverse
free
RC Airplane Motor Adapter Plate 16x(16,19) to 33x33 by RcArchie
...with this hole spacing. and 3 circle versions for markqv design. i included .step and .sldprt files which you...
thingiverse
free
RunCam Split Narrow Simple Case and Front Camera Mount by guidoracer
...mount by guidoracer thingiverse i found the case that markqv designed to mount the runcam split v1 into a...
Strix
3d_export
$60
eurocopter ec665 arh tiger australian scheme
...as well as a laser designator incorporated in the strix sight for the firing of hellfire ii air-to-ground missiles....
turbosquid
$15
Motherboard ASUS ROG STRIX Z370-E Gaming 2020
... strix z370-e gaming 2020 for download as , stl, dae, and obj on turbosquid: 3d models for games, architecture, videos. (1638734)
thingiverse
free
GPU Holder (Support Carte Graphique) by Jetstorm_3D
...à l'élévation de votre carte design inspiré asus rog strix (sur les photos il s'agit d'une gtx 1070) version...
thingiverse
free
DJI Air Unit Frame for Strix Goblin by WDZaphod
...locked, air will enter trough the gap around the camera, and ensure proper cooling.
i mounted it with little self-tapping screws.
thingiverse
free
ASUS ROG Strix Helios GX601 Front Glass Replacement by Firefist338
...wer up! design also from this site.
the panel is splitted in half. printed on cr-10 v2
your temps will drop at least 8°c!!!
enjoy
thingiverse
free
Strix Screech SMA Antenna Mount by jhendrix
...nt by jhendrix
thingiverse
sma antenna mount for strix screechhttps://www.tinkercad.com/things/gijrsx3d9zz-screech-antenna-mount
thingiverse
free
Strix Goblin Screw on Canopy by carrera0to60
...the slot on the nylon bolt. the result is a much more robust attachment system and it only takes a couple seconds longer to open.
thingiverse
free
AM4 bracket for Corsair H100i v2 AIO by BrianValente
...works perfectly fine with my h100i v2 and rog strix ...
thingiverse
free
Strix Strobe cover for AR Wing Pro by keithluneau
... led strobe light into the gps bay on the sonicmodell ar wing pro. https://www.readymaderc.com/products/details/strix-strobes-red
thingiverse
free
Strix Goblin Canopy for DJI Air Unit by Stewpid
...the main canopy in place.
printed @ 25% infill with triple walls to ensure that the camera mounts would hold up to rough landings
V1
3d_ocean
$9
HDRI Morning Sun V1
...ojects. format: this file is in the following formats: hdr exr jpg resolution: this file is 4128×1932 pixels. it is 32 bit color.
3d_ocean
$15
3d human head v1
...his is a 3d model of male head. the model has polys: 3580 verts: 3635 there are two textures, the first is with painted eyebro...
3d_ocean
$9
Cloudy Sun V1
...ojects. format: this file is in the following formats: hdr exr jpg resolution: this file is 4128×2322 pixels. it is 32 bit color.
3d_ocean
$9
HDRI Morning SunSet V1
...ojects. format: this file is in the following formats: hdr exr jpg resolution: this file is 4000×1876 pixels. it is 32 bit color.
3d_ocean
$9
Cloudy Evening V1
...ojects. format: this file is in the following formats: hdr exr jpg resolution: this file is 4128×2322 pixels. it is 32 bit color.
3d_ocean
$15
Apple watch v1
... renders - two *.max files included standart materials and vray-materials - hi-poly model with meshsmooth modifier - not colap...
3d_ocean
$9
HDRI Sunset V2
...panorama sky skydome sun sunset this is a sunset v1 hdr you can use on your projects. format: this...
3d_ocean
$9
Yellow Cloud with Blue V1
...ojects. format: this file is in the following formats: hdr exr jpg resolution: this file is 4128×2322 pixels. it is 32 bit color.
3d_export
$25
Cybertech V1 Drone 3D Model
...e self combat speeder
cybertech v1 drone 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl iggydesign 112285 3dexport
3d_export
$25
Drone V1 Red Manga 3D Model
...on spaceship starship
drone v1 red manga 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl iggydesign 107045 3dexport
Parts
3d_export
$9
Alfa Romeo Logo 3D Model
... avto transport 3d model logo emblem detailed high quality alfa romeo alfa romeo
alfa romeo logo 3d model rmodeler 38948 3dexport
3d_export
$9
Daimler Logo 3D Model
...art of avto transport 3d model logo emblem detailed high quality c4d obj lwo 3ds mb
daimler logo 3d model rmodeler 39185 3dexport
3d_export
$29
Tirenew 3D Model
...tirenew 3d model 3dexport tire parts of auto tirenew 3d model leophunice 72774...
3d_export
$5
Bearings 3D Model
...y factory technics technology car auto rotation spare part machine driving metal nickel
bearings 3d model dmitry87 49638 3dexport
3d_export
$99
Watch 9 3D Model
...watch gear wristwatch constantin swiss geneve gears mechanical isochronism parts chronograph exploded people watch 9 3d model fabelar 81285...
3d_export
$20
Nissan Navara 2013 rims 3D Model
...issan maxima 2013 new rims wheels tire vehicle part oem sentra navara
nissan navara 2013 rims 3d model artur92_art 84360 3dexport
3d_export
$20
OEM rims 3D Model
...oem rims 3d model
3dexport
nissan maxima 2013 new rims wheels tire vehicle part oem
oem rims 3d model artur92_art 84358 3dexport
3d_export
$33
BB Audi R8 wheel 3D Model
...e tires brake brakes disc brembo disk vehicle part of avto car alloy
bb audi r8 wheel 3d model creativeideastudio 88371 3dexport
3d_export
$33
Buick Regal GS wheel 3D Model
...tyre tires brake brakes disc brembo disk vehicle part of avto car
buick regal gs wheel 3d model creativeideastudio 88372 3dexport
3d_export
$20
Chevrolet Camaro 2008 BlackConcept rim 3D Model
... of avto car chevrolet camaro 2008 blackconcept
chevrolet camaro 2008 blackconcept rim 3d model creativeideastudio 56338 3dexport