Thingiverse
![Stratosurfer Horizontal Tail Support by AxionZ](/previews/8300097.jpg)
Stratosurfer Horizontal Tail Support by AxionZ
by Thingiverse
Last crawled date: 3 years, 2 months ago
Since the tail on the Stratosurfer is held in place by a single mounting screw, there is excessive free play and the surface is easily torn off. This 10 min print will increase the rigidity of the horizontal tail assembly by adding an integrated structure.
Installation:
-Remove just enough material to fit the print in the area shown on the bottom surface of the horizontal tail.
-Install support in cutout with E6000 or equivalent adhesion material.
-Pick up hole on fuselage and install M3 mount bolt through fuselage and into the support.
Installation:
-Remove just enough material to fit the print in the area shown on the bottom surface of the horizontal tail.
-Install support in cutout with E6000 or equivalent adhesion material.
-Pick up hole on fuselage and install M3 mount bolt through fuselage and into the support.
Similar models
thingiverse
free
![RC Plane Rudder Tail-Wheel Support Arm & Plate by KellenR](/t/8929803.jpg)
RC Plane Rudder Tail-Wheel Support Arm & Plate by KellenR
... holds the tail wheel and secures to the rudder, allowing for steering.
(there is an example of the application in the images.)
thingiverse
free
![Strix Stratosurfer canopy by tfmccull](/t/8714219.jpg)
Strix Stratosurfer canopy by tfmccull
...stratosurfer w/ interior mount for an hs1177/runcam swift or similar camera. bolts to existing canopy base with m3 hardware....
grabcad
free
![Fighter Aircraft Tail Fuselage](/t/13067751.jpg)
Fighter Aircraft Tail Fuselage
...fighter aircraft tail fuselage
grabcad
fighter aircraft tail fuselage
thingiverse
free
![HDFury Diva Wall Mount](/t/4703733.jpg)
HDFury Diva Wall Mount
...t for hdfury diva. it can be installed both horizontally and vertically.
i printed with 30% infill, without any supports or raft.
thingiverse
free
![NEMA17 Horizontal Motor Mount by maker78](/t/8832732.jpg)
NEMA17 Horizontal Motor Mount by maker78
...on a printed platform to lift it up from the ground. there are four m3 mounting holes to bolt the mount to a horizontal surface.
thingiverse
free
![MD520N RC Helicopter Fuselage Tail Parts by TheFox70](/t/8105129.jpg)
MD520N RC Helicopter Fuselage Tail Parts by TheFox70
... designed for a working notar tail using 40mm edf fan.
you can see it in action here:https://www.youtube.com/watch?v=m4tskxjeojy
thingiverse
free
![Horizontal mounting 608 bearing holder by vik](/t/9071763.jpg)
Horizontal mounting 608 bearing holder by vik
...ount for a 608 bearing, printed with 2 x m5 holes to attach it to a surface. there is also a vertical mounting bearing available.
thingiverse
free
![XR650l Licence Plate Mount by limacoastie159](/t/8139611.jpg)
XR650l Licence Plate Mount by limacoastie159
...he stock holes in the rear fender after removing the stock tail light and plate mount and installing the wps surface mount light.
thingiverse
free
![V-tail servo mount for plane by headsmess](/t/8909181.jpg)
V-tail servo mount for plane by headsmess
...cro servos...9gram i think?
mount for vtails on foam cut fuselage. i guess it could be rotated 45 degrees for standard tails...
thingiverse
free
![Blade 150S Horizontal Tail Boom Fin by Korrupshun](/t/8192756.jpg)
Blade 150S Horizontal Tail Boom Fin by Korrupshun
...;t effect the performance as well.
print both files, the fin and the bottom clamp. you'll need 2 - m3 x 8 screws to install.
Axionz
thingiverse
free
![Firstar 200 16x12mm 19x16mm motor mount by AxionZ](/t/8256103.jpg)
Firstar 200 16x12mm 19x16mm motor mount by AxionZ
... with this mount to support motors with a 16x12mm or 19x16mm mount bolt pattern.
note: adhesive required to hold mount in place.
thingiverse
free
![Ranger 1600/2000 robust motor mount by AxionZ](/t/8266922.jpg)
Ranger 1600/2000 robust motor mount by AxionZ
...in most aft position.
update:
added files with smaller 2mm tangs and no tangs.
https://www.youtube.com/watch?v=avle7kgqja4&t=
thingiverse
free
![RunCam Split top plate for Interchangeable FPV Pan/Tilt Camera Mount for RC Models by AxionZ](/t/8273232.jpg)
RunCam Split top plate for Interchangeable FPV Pan/Tilt Camera Mount for RC Models by AxionZ
...era mount for rc models by axionz
thingiverse
runcam split top plate for interchangeable fpv pan/tilt camera mount for rc models
thingiverse
free
![AKK FPV Transmitter/ Mini Camera tail mount by AxionZ](/t/8273271.jpg)
AKK FPV Transmitter/ Mini Camera tail mount by AxionZ
.../b07886xyz8/ref=cm_sw_r_cp_apa_nolfbbwpa3heq
video curtesy of "noagenda fpv"https://www.youtube.com/watch?v=fudburtpypy
thingiverse
free
![Volantex Ranger/ Generic Ublox M8N GPS Mount by AxionZ](/t/8273366.jpg)
Volantex Ranger/ Generic Ublox M8N GPS Mount by AxionZ
... mounthttps://www.readymaderc.com/products/details/rmrc-mini-gpshttps://www.racedayquads.com/products/micro-ublox-m8n-gps-glonass
thingiverse
free
![Iflight XL5 V2 LED/Antenna mount by AxionZ](/t/8302386.jpg)
Iflight XL5 V2 LED/Antenna mount by AxionZ
... vtx antenna and led strip.
rmrc led striphttps://www.readymaderc.com/products/details/rmrc-fire-leds-ws2812-5050-rgb-addressable
thingiverse
free
![Stratosurfer GPS Mount by AxionZ](/t/8307381.jpg)
Stratosurfer GPS Mount by AxionZ
...urfer.https://www.readymaderc.com/products/details/rmrc-mini-gpshttps://www.racedayquads.com/products/micro-ublox-m8n-gps-glonass
thingiverse
free
![350z Cubby Delete by AxionZ](/t/5028434.jpg)
350z Cubby Delete by AxionZ
...g nuts x4, 4mm-20 socket head bolts x4.
https://my350z.com/forum/exterior-and-interior/623748-free-custom-cubby-delete-stl-s.html
Stratosurfer
thingiverse
free
![Stratosurfer GoPro Hero7 and dual FPV camera mount by kdamon](/t/8147788.jpg)
Stratosurfer GoPro Hero7 and dual FPV camera mount by kdamon
...amon
thingiverse
mount i made to hold a gopro hero7, a foxeer micro camera, and dji camera on a servo os they're all on pan.
thingiverse
free
![Stratosurfer GPS Mount by AxionZ](/t/8307381.jpg)
Stratosurfer GPS Mount by AxionZ
...urfer.https://www.readymaderc.com/products/details/rmrc-mini-gpshttps://www.racedayquads.com/products/micro-ublox-m8n-gps-glonass
thingiverse
free
![Strix StratoSurfer Parts v1 by markqv](/t/8596254.jpg)
Strix StratoSurfer Parts v1 by markqv
...e printed at 80% infil, all others are 20-40%
print orientation is dependent on printer/slicer set-up, please rotate if necessary
thingiverse
free
![Strix Stratosurfer - Small Canopy by markqv](/t/8581931.jpg)
Strix Stratosurfer - Small Canopy by markqv
...signed to be printed right-side-up, as it sits on the plane.
the canopy shown in the pictures was printed in abs at .2mm quality.
thingiverse
free
![Strix Stratosurfer camera mount by tfmccull](/t/8733337.jpg)
Strix Stratosurfer camera mount by tfmccull
...other cam with a standard 1/4" mount. thin layer of goop or similar on the top will prevent the camera from slipping around.
thingiverse
free
![STRIX StratoSurfer Motor Mount by xtrmtrk](/t/8732673.jpg)
STRIX StratoSurfer Motor Mount by xtrmtrk
...ake sure your shaft clears the space for it inside this mount. if there's any rubbing and friction you'll have problems!
thingiverse
free
![Strix Stratosurfer wood tray by raptor_demon](/t/8533549.jpg)
Strix Stratosurfer wood tray by raptor_demon
....1mm was too much on my laser. so i you are 3d printing these you might need wider slots.
it is slightly too long for a k40 laser
thingiverse
free
![Stratosurfer FPV + session canopy by aalbinger](/t/8696856.jpg)
Stratosurfer FPV + session canopy by aalbinger
...known to work.
as with all gopro mounts make sure that area is strong enough to hold up as the gopro hinge is pretty darned thin.
thingiverse
free
![Strix Stratosurfer canopy by tfmccull](/t/8714219.jpg)
Strix Stratosurfer canopy by tfmccull
...se with m3 hardware. optional support stl for additional bracing/mounting options. opening for sma connector on left side. enjoy!
Tail
3d_export
$39
![Fish 3D Model](/t/290329.jpg)
Fish 3D Model
...fish 3d model 3dexport realistic fish rigged autoswim maya tail scales sea ocean water multiformat fish 3d model stefanvink...
3d_export
$26
![Margarita Cocktail High Detailed 3D Model](/t/292806.jpg)
Margarita Cocktail High Detailed 3D Model
...e glass straw coaster drink liquor beverage bar party pub club
margarita cocktail high detailed 3d model vkmodels 55505 3dexport
3d_ocean
$8
![Pegasus 3D Model](/t/862162.jpg)
Pegasus 3D Model
...horsewithwings knight pegasus race realistic rider riding safari stallion tail white whitehorse wing wings the beautiful pegasus model has...
3d_ocean
$8
![The Pug dog Low poly](/t/862365.jpg)
The Pug dog Low poly
...of dog with a wrinkly, short-muzzled face and curled tail the breed has a fine, glossy coat that comes...
3ddd
$1
![Eichholtz Prints](/t/1001505.jpg)
Eichholtz Prints
...polys: 2478 verts: 2516 1 - eichholtz print weasel tail 2 - eichholtz print tutti frutti 3 - eichholtz...
3ddd
$1
![Z Gallerie York 5 Drawer Chest](/t/597103.jpg)
Z Gallerie York 5 Drawer Chest
...the case - drawers are constructed of mixed woods, dove-taild in back corners, and include high-quality hidden under-drawer guides...
3d_ocean
$29
![Hair Rock](/t/560541.jpg)
Hair Rock
...imvu long pony ponytail realistic short style stylish tails detaild quality 3d hair for use by vfx, animation ,...
3d_ocean
$15
![Low Poly Mini Skeleton Tail](/t/565208.jpg)
Low Poly Mini Skeleton Tail
...rt. he likes to stalk his prey and attack from a distance. this model has been rigged with maya 2013. the rig will not work in...
3d_ocean
$5
![Tail Lift Control (VrayC4D)](/t/565384.jpg)
Tail Lift Control (VrayC4D)
...nstruction control danger elevator emergency lift mechanic play security start stop tail tail lift control
files: .3ds .c4d .obj
3d_ocean
$19
![Rocking Horse](/t/568278.jpg)
Rocking Horse
...memories model play plush rock rocking saddle stirrup swing tail toy velvet wood general this is a realistic model...
Horizontal
3d_export
$10
![Horizontal decor 3D Model](/t/297299.jpg)
Horizontal decor 3D Model
...horizontal decor 3d model
3dexport
horizontal decor stl cnc prototyping carved
horizontal decor 3d model 3dbyte 78665 3dexport
3ddd
$1
![Meurice sconce by Jonathan Adler](/t/866266.jpg)
Meurice sconce by Jonathan Adler
...g16.5 candelabra bulbs • can be hung vertically or horizontaly. antique brass material settings preview is...
3d_export
$5
![Horizontal bar wall 3D Model](/t/859780.jpg)
Horizontal bar wall 3D Model
...rizontal bar wall 3d obj
horizontal bar wall 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl fraske 108995 3dexport
3d_export
$10
![Wind Turbine 3D Model](/t/957812.jpg)
Wind Turbine 3D Model
...tower kinetic electrical aerofoil powered generator windmill farm hawt horizontal axis electric wind turbine 3d model download .c4d .max...
3ddd
$1
![Rodriguez – Horizontal Champagne Crackle](/t/971648.jpg)
Rodriguez – Horizontal Champagne Crackle
... chandelier , wred
длина - 165 см
высота - 70 см
archive3d
free
![Kindergarden-2 3D Model](/t/1039601.jpg)
Kindergarden-2 3D Model
...kindergarden-2 3d model archive3d kindergarden sport playground horizontal ...
archive3d
free
![Rack 3D Model](/t/1040565.jpg)
Rack 3D Model
...rack 3d model archive3d rack horizontal bar gym rack sport 1 - 3d model (*.gsm+*.3ds)...
archive3d
free
![Door 3D Model](/t/1040957.jpg)
Door 3D Model
...door 3d model archive3d door sliding door horizontal sliding door door s n150612 - 3d model (*.3ds)...
archive3d
free
![Door 3D Model](/t/1041151.jpg)
Door 3D Model
...door 3d model archive3d sash-door horizontal sliding door door n210710 - 3d model (*.gsm+*.3ds) for...
3ddd
$1
![Modern Horizontal paints](/t/973951.jpg)
Modern Horizontal paints
...а
три горизонтальные картины в современном стиле:
meadow lights (metallic paints)
gossiping birds
standing tall (metallic paints)
Support
3d_export
$12
![Walking Canes 3D Model](/t/290326.jpg)
Walking Canes 3D Model
...canes cane stick sticks assistive crutch crutches hiking camping support disabled staff aid balancing trekking poles gentlemen classic old...
3d_export
$50
![Fast Food Restaraunt Set 3D Model](/t/290393.jpg)
Fast Food Restaraunt Set 3D Model
...restaraunt 3d models tables chair seats pan tray bottles support boxes interiors furniture fast food restaraunt set 3d model...
3ddd
$1
![Neverending Glory](/t/864153.jpg)
Neverending Glory
...the leadership of mozart himself. through this collection avid supportrs and lovers of stories and simplicity can acquire a...
3d_ocean
$2
![Grassydirt](/t/862240.jpg)
Grassydirt
...2k dirt grassy ground textures grassydirt cg textures tileable support include : normal map + specular...
3d_ocean
$2
![Deadgrass](/t/862252.jpg)
Deadgrass
...dead? i hope you come back to life! tileable supportd! have any problem? contact...
3d_ocean
$7
![Substance Textures 2-Pack](/t/862390.jpg)
Substance Textures 2-Pack
...need to open them in unity, unreal, any other supportd game engine or substance designer itself) create hundreds of...
3d_export
$10
![Bookend 3D Model](/t/859638.jpg)
Bookend 3D Model
...bookend 3d model 3dexport bookend support books end bookshelf library sheetmetal metal home decor decoration...
3d_ocean
$2
![Cementwall](/t/860327.jpg)
Cementwall
...be careful! , cement walls were very sharp! tileable support have any problem? contact...
3ddd
$1
![LEMA 3-POD](/t/959982.jpg)
LEMA 3-POD
...tripod: a continuous symbol in chrome plated steel which support a plane—rectangular, round or drop-shaped in glass, wood, or...
3ddd
$1
![Flexform Mood Drop](/t/960067.jpg)
Flexform Mood Drop
...by felxform/mood from drop collection. quad single model mesh. support ...