Simple Dual Monitor Support (VESA) by ThisIsNtLink

Last crawled date: 3 years, 4 months ago

This is a Dual Monitor Support
Materials: ABS, PETG or PLA+
I printed mine in PLA+ from GST3D (it was cheap)
Uses around 150gr, a wood stick from a broom with 24mm diameter and m4 screws and nuts.
Print settings that I used
No supports required
10% infill
0.8mm nozzle with 0.96mm layer width, 0.2mm height
I suggest to reduce the screw size in x and y about 2% but leave z at 100% to make a gap with more tolerance
Drill a bit the holes to make it fit
PD:The gap of the clamp is 27mm
Update 1 ------------------------------------------------------------------------------------
Thanks to Agustín Llorente, made me realize my mistake uploading the STL files, also I added +0.06mm to the screw so it can be printed with more tolerance.
Also, the thing that goes to the wood stick (Call it stick grap) has been extended, to make more space between the monitors.
ALSO I added one version without this extension that makes the connection direct to the VESA, It's useful if you want to eliminate the gap between the two monitors, it works fine with 2x22"
Enjoy it, if you want, donate a spool of filament that I need something better lol