Thingiverse
![Acer R240HY VESA Adapter by johnbobbytables](/previews/8376921.jpg)
Acer R240HY VESA Adapter by johnbobbytables
by Thingiverse
Last crawled date: 3 years, 2 months ago
Before you print!
You need the stand that came with your monitor in order for this print to work
Print at higher temperatures than you normally would for PLA (210c-220c)
Overview
Hello!
This is a VESA adapter for an Acer R240HY computer monitor. This may also fit other certain monitors in the Acer family, however this is the only Acer monitor that I own and I can't vouch for the support for the other monitors.
I worked on this adapter through 3 or 4 revisions, this configuration holds up extremely well and does NOT require any other hardware besides the stand that the monitor came with (and a screw driver). I tried some other Acer vesa adapters on thingiverse however none of them seemed sturdy enough so I decided to design my own.
This adapter also does not block any of your ports and rests completely behind the monitor.
Happy printing! :)
Printing Tips
I recommend printing this with ABS as it will probably hold up better to the long term stress of holding the monitor, however PLA works just fine. If you use PLA I highly suggest using a minimum layer height of 0.2mm and using higher temperatures for better layer adhesion. You do not need supports, you may need rafts depending on if you have issues with your prints sticking too tightly to the bed.
I would recommend using at least 10% infill. You should use higher infill if you are printing at lower temperatures.
Mounting Instructions
You also need the monitor stand that came with the monitor. Remove the mount piece from the stand (see pictures) with the screws that came with the built-in mount. Then transfer this mount and the screws to the VESA adapter. Do not screw in too tightly or you could cause your layers to separate especially if you are using PLA. The mount will be a tight fit in the VESA adapter, this is by design. This adapter is different from other Acer VESA adapters because it does not rely on the screws to hold the weight of the monitor, instead most of the weight of the monitor is held up just from the mounting pressure. I still recommend installing the mounting screws that came with the stand.
You need the stand that came with your monitor in order for this print to work
Print at higher temperatures than you normally would for PLA (210c-220c)
Overview
Hello!
This is a VESA adapter for an Acer R240HY computer monitor. This may also fit other certain monitors in the Acer family, however this is the only Acer monitor that I own and I can't vouch for the support for the other monitors.
I worked on this adapter through 3 or 4 revisions, this configuration holds up extremely well and does NOT require any other hardware besides the stand that the monitor came with (and a screw driver). I tried some other Acer vesa adapters on thingiverse however none of them seemed sturdy enough so I decided to design my own.
This adapter also does not block any of your ports and rests completely behind the monitor.
Happy printing! :)
Printing Tips
I recommend printing this with ABS as it will probably hold up better to the long term stress of holding the monitor, however PLA works just fine. If you use PLA I highly suggest using a minimum layer height of 0.2mm and using higher temperatures for better layer adhesion. You do not need supports, you may need rafts depending on if you have issues with your prints sticking too tightly to the bed.
I would recommend using at least 10% infill. You should use higher infill if you are printing at lower temperatures.
Mounting Instructions
You also need the monitor stand that came with the monitor. Remove the mount piece from the stand (see pictures) with the screws that came with the built-in mount. Then transfer this mount and the screws to the VESA adapter. Do not screw in too tightly or you could cause your layers to separate especially if you are using PLA. The mount will be a tight fit in the VESA adapter, this is by design. This adapter is different from other Acer VESA adapters because it does not rely on the screws to hold the weight of the monitor, instead most of the weight of the monitor is held up just from the mounting pressure. I still recommend installing the mounting screws that came with the stand.
Similar models
thingiverse
free
![Acer VESA Mount Adapter SB220Q by Pevo](/t/8162623.jpg)
Acer VESA Mount Adapter SB220Q by Pevo
...but i'm sure that 0.2mm would work too.
lastly, pla+ might be a good material for this model, since it bends before it snaps.
thingiverse
free
![Acer h236hl VESA Mount by sazrocks](/t/9684030.jpg)
Acer h236hl VESA Mount by sazrocks
...have to re-seize or drill out the holes for the screws for the vesa mount, i just sized them to random screws that i had on hand.
thingiverse
free
![LG monitor original quick release mount to vesa adapter by Sulya](/t/8117242.jpg)
LG monitor original quick release mount to vesa adapter by Sulya
...ponsible in any way for the damage it might cause to your monitor
although i have used it for more then a year without any issues
thingiverse
free
![HP 24m VESA Adapter by iliketrains651](/t/8342965.jpg)
HP 24m VESA Adapter by iliketrains651
... nuts and bolts to secure the part to the vesa mount.
if you have any questions please refer to the pictures or leave a comment.
thingiverse
free
![Acer G247HYU VESA Adapter by CapitalHitman38](/t/5029615.jpg)
Acer G247HYU VESA Adapter by CapitalHitman38
... bracket for acer monitor by pschoen made to fit and work with the acer g247hyu monitor. improved structural support for monitor.
thingiverse
free
![Acer XB321HK Alternative Stand by ratiQnal](/t/8556592.jpg)
Acer XB321HK Alternative Stand by ratiQnal
...owever many fits your needs
printed with polymax. not sure how well standard pla would hold up, since the monitor is really heavy
thingiverse
free
![VESA Adaptor for ACER Monitor by jbman](/t/8529711.jpg)
VESA Adaptor for ACER Monitor by jbman
.... the bending stress is held by the protrusion in the back of the adapter. the acer mount should slide directly into the adapter.
thingiverse
free
![ASUS VX239 VESA Mount by awasobabba](/t/8200131.jpg)
ASUS VX239 VESA Mount by awasobabba
...d to the vesa mount using 4 m4 screws.
in addition, you will need some spacers depending on how long the plugs are you are using.
thingiverse
free
![Benq stand vesa adapter by bombala](/t/8493009.jpg)
Benq stand vesa adapter by bombala
...nq monitor.
my monitor stand says it's for these models, but check if your monitor stand looks the same:
gw2480
gl2580
gl2480
thingiverse
free
![Logitech Streamcam Monitor Adapter by _joel](/t/9672963.jpg)
Logitech Streamcam Monitor Adapter by _joel
...challenge for printing is the bridging top layer, you may need to adjust your print settings depending on how well it can bridge.
R240Hy
thingiverse
free
![Dual Monitor Clip Acer R240HY by kelton8tor](/t/9268303.jpg)
Dual Monitor Clip Acer R240HY by kelton8tor
...dual monitor clip acer r240hy by kelton8tor
thingiverse
clip you
thingiverse
free
![VESA Adaptor for ACER Monitor by jbman](/t/8529711.jpg)
VESA Adaptor for ACER Monitor by jbman
...this is a vesa mounting adapter for an acer r240hy monitor. i disassembled the monitor base and reused the...
grabcad
free
![Laser Cut Monitor Stand/Riser](/t/7576757.jpg)
Laser Cut Monitor Stand/Riser
...laser cut monitor stand/riser grabcad made for the acer r240hy monitor to boost it up about 3...
Vesa
3ddd
$1
![Samsung S24D590L](/t/976794.jpg)
Samsung S24D590L
..., samsung pls монитор 23,6 дюйма 1920x1080. настольный (без vesa крепления). моделил с натуры,...
thingiverse
free
![vesa mount by CZMichal](/t/8311676.jpg)
vesa mount by CZMichal
...vesa mount by czmichal
thingiverse
vesa mount
thingiverse
free
![Simple Vesa 75mm](/t/4714888.jpg)
Simple Vesa 75mm
...simple vesa 75mm
thingiverse
a simple vesa holder for 75mm
thingiverse
free
![vesa addaptor by lvo](/t/8130840.jpg)
vesa addaptor by lvo
...vesa addaptor by lvo
thingiverse
vesa addapter to fix crestron device behind monitor
thingiverse
free
![Networkswitch VESA mount [70x70]](/t/4772513.jpg)
Networkswitch VESA mount [70x70]
...tch vesa mount [70x70]
thingiverse
this is a vesa mount for my tp-link networkswitch. vesa dimensions from this file is 70x70mm.
thingiverse
free
![Webcam VESA Mount by BritishLibrary](/t/8359921.jpg)
Webcam VESA Mount by BritishLibrary
...webcam vesa mount by britishlibrary
thingiverse
vesa mount for webcam
thingiverse
free
![VESA 100 spacer 3mm](/t/4738392.jpg)
VESA 100 spacer 3mm
...vesa 100 spacer 3mm
thingiverse
vesa 100 spascer 3mm
thingiverse
free
![Vesa mount plate by jubjub235](/t/8905707.jpg)
Vesa mount plate by jubjub235
...235
thingiverse
this is a vesa mount plate adapter for lcd screen
other parts connecting to vesa mount plate is comming soon !
thingiverse
free
![VESA 100mm Spacer by charlesj5](/t/8278791.jpg)
VESA 100mm Spacer by charlesj5
...vesa 100mm spacer by charlesj5
thingiverse
10mm spacer for 100mm vesa mount
thingiverse
free
![TECKNET VESA MOUNT by protezio](/t/8700013.jpg)
TECKNET VESA MOUNT by protezio
...tecknet vesa mount by protezio
thingiverse
vesa mount for tecknet hmdi switch
Acer
3ddd
$1
![Проектор Acer](/t/918103.jpg)
Проектор Acer
...er
3ddd
acer , проектор , тренога
проектор acer
3ddd
$1
![Acer S236HL](/t/619298.jpg)
Acer S236HL
...acer s236hl
3ddd
монитор , acer
монитор acer s236hl
3ddd
$1
![mouse acer](/t/611178.jpg)
mouse acer
...mouse acer
3ddd
мышка
mouse acer
3ddd
$1
![Acer palmatum](/t/609567.jpg)
Acer palmatum
...acer palmatum
3ddd
бонсай
acer palmatum
turbosquid
$30
![Acer Allegro Smartphone Also known as Acer W4, Acer M310](/t/13507601.jpg)
Acer Allegro Smartphone Also known as Acer W4, Acer M310
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
![PC Acer](/t/844393.jpg)
PC Acer
...pc acer
3ddd
компьютер
монитор acer с системным блоком
3ddd
$1
![Acer P225HQbd 21_5](/t/847685.jpg)
Acer P225HQbd 21_5
...acer p225hqbd 21_5
3ddd
acer , монитор
ментал рей, acer p225hqbd
3ddd
$1
![Ipe Cavalli Acer](/t/660705.jpg)
Ipe Cavalli Acer
...li , acer , консоль
acer console by ipe cavalli
turbosquid
$69
![acer laptop](/t/13286082.jpg)
acer laptop
...quid
royalty free 3d model acer laptop for download as blend on turbosquid: 3d models for games, architecture, videos. (1678983)
turbosquid
$40
![ACER PC](/t/13279743.jpg)
ACER PC
...
turbosquid
royalty free 3d model acer pc for download as ma on turbosquid: 3d models for games, architecture, videos. (1341087)
Adapter
3d_export
$10
![Adapter 3D Model](/t/48052.jpg)
Adapter 3D Model
...adapter 3d model
3dexport
adapter
adapter 3d model mur 20260 3dexport
archive3d
free
![Adapter socket 3D Model](/t/1052201.jpg)
Adapter socket 3D Model
...dapter socket adapter
adapter socket n090211 - 3d model (*.3ds) for interior 3d visualization.
turbosquid
$400
![cell adaptation](/t/13492354.jpg)
cell adaptation
...
royalty free 3d model cell adaptation for download as blend on turbosquid: 3d models for games, architecture, videos. (1701655)
archive3d
free
![Adapter 3D Model](/t/1055369.jpg)
Adapter 3D Model
...ups pc equipment
adapter extron n180813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$5
![usb adapter](/t/13247778.jpg)
usb adapter
...royalty free 3d model usb adapter for download as ige and stl on turbosquid: 3d models for games, architecture, videos. (1582234)
turbosquid
$15
![Power adapter](/t/13376627.jpg)
Power adapter
...free 3d model power adapter for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1510024)
turbosquid
$8
![USB adapter](/t/13423941.jpg)
USB adapter
...e 3d model usb adapter for download as max, fbx, obj, and dwg on turbosquid: 3d models for games, architecture, videos. (1713542)
turbosquid
$30
![adapter.3ds](/t/13252569.jpg)
adapter.3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
![Nokia Adapter](/t/13371131.jpg)
Nokia Adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
![Universal adapter](/t/13524030.jpg)
Universal adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.