Simple 8x8 LED Matrix Light/Clock by Roboman444 3d model
3dmdb logo
Thingiverse
Simple 8x8 LED Matrix Light/Clock by Roboman444

Simple 8x8 LED Matrix Light/Clock by Roboman444

by Thingiverse
Last crawled date: 3 years ago
Sunrise Smart Light
Arduino WIFI Clock to animate LEDs with the sunrise.
Based off the NTP Client sketch provided by Arduino, and using the Dusk2Dawn library, modified to run on an ESP-12E.
All Project Files on GitHub

Materials
ESP-12E (and Micro-USB cable)
LED Square 8x8
OLED IC2 32x128 Screen
Push-Button Microswitch
3D Printing Filament
Print Settings and Instructions
Top (for translucent effect using just white)
Wall Count: 1
Top Layer Count: 12
Since the top is printed upside down, the top will be connecting to the base.

Bottom Layer Count: 4
Infill: 10%
Infill Pattern: Cubic
Brim (In/Out): 8
Trim the outer brim, and optionally leave the inner brim for softly lit edge.

Base
Whatever settings you prefer, I used:
Layer Height: 0.3mm
Infill: 30%

Tags