Thingiverse
RC Snowmobile by Erikw
by Thingiverse
Last crawled date: 3 years ago
Fully 3D printed RC snowmobile. Fully functional with working suspension. Works surprisingly well in snow. The only issues I had, is the front control arms that snaps if you jump to high.
This is not a easy build and you need some CAD skills to make motor mounts and
if necessary some other parts. You also need some RC skills to get the best motor setup and calculate the gearing.
What you need besides plastic:RC stuff like transmitter and so onMotor, speed controller, and transmission between motor and drive shaft.5x150mm steel rods for steering axles (cut to fit)4x400m steel rods for the rest of the axles. Like the shock absorber, suspension and drive shaft (cut to fit)4pc Springs for shock absorbers inner diameter 7mm and ~17mm long depending on how hard suspension you want.6pc Ball bearings 8x4x3mm for drive shaft, upper wheels and big lower wheels.Some stiff 2mm wire to use as wear rods under the skis.some M3 screws with nuts
*4 and 5mm set screw shaft collars or equivalent
The chassis is glued together with hot glue. The bearing bracket is bolted to the chassis with M3 screws and so is the front suspension. All the steel rods is fitted with set screw shaft collars. The seat is held to the chassis by magnets at the rear and is easy to remove to change battery.
The power plant and gearing is a little tricky. I used a hobbyking 36mm 550w inrunner and toothed pulleys with a gearing of 9 to 42. I chose this setup because I thought needed the power but its to overpowered and a little heavy. I recommend to use a smaller high torque engine.
Please send me your questions and I will update with more information.
This is not a easy build and you need some CAD skills to make motor mounts and
if necessary some other parts. You also need some RC skills to get the best motor setup and calculate the gearing.
What you need besides plastic:RC stuff like transmitter and so onMotor, speed controller, and transmission between motor and drive shaft.5x150mm steel rods for steering axles (cut to fit)4x400m steel rods for the rest of the axles. Like the shock absorber, suspension and drive shaft (cut to fit)4pc Springs for shock absorbers inner diameter 7mm and ~17mm long depending on how hard suspension you want.6pc Ball bearings 8x4x3mm for drive shaft, upper wheels and big lower wheels.Some stiff 2mm wire to use as wear rods under the skis.some M3 screws with nuts
*4 and 5mm set screw shaft collars or equivalent
The chassis is glued together with hot glue. The bearing bracket is bolted to the chassis with M3 screws and so is the front suspension. All the steel rods is fitted with set screw shaft collars. The seat is held to the chassis by magnets at the rear and is easy to remove to change battery.
The power plant and gearing is a little tricky. I used a hobbyking 36mm 550w inrunner and toothed pulleys with a gearing of 9 to 42. I chose this setup because I thought needed the power but its to overpowered and a little heavy. I recommend to use a smaller high torque engine.
Please send me your questions and I will update with more information.
Similar models
thingiverse
free
Snowmobile 1:10 Fully functional by Erikw
...end to use a smaller high torque engine.
please send me your questions and i will update with more information. video coming soon
thingiverse
free
Hobby Gear Motor Suspension by Ghost384904
...holds upper part of shock absorber
spring arm v2.2 screw holes recessed for wheel clearance
bushing added for upper part of shock
thingiverse
free
RC plane landing gear with suspension by Axbri
...to work with 1/10 scale rc car shock absorbers similar to those ones: https://www.banggood.com/4pcs-100mm-front-rear-shock-absorber-damper-108004-upgrade-for-1-or-10-hsp-rc-car-parts-p-1280176.html there is also a nose...
thingiverse
free
Z Rod Collar- 8mm Collar (M3 Screw) by phesketh01
...integrated spacer. this prints without supports and removed the need for a washer.
the model uses a small m3 screw and an m3 nut.
thingiverse
free
Land Rover Defender with WPL upgrade
...check my building video:
and a test run:
https://www.youtube.com/watch?v=jcqoxldxk-ohttps://www.youtube.com/watch?v=miatj1py-gs
thingiverse
free
RC Shock absorber by memfis01
...with a 0,9 mm wire diameter.
the guiding rod is a hex head screw m3x16mm. i recommend that you use an m3 brake nut.
have fun ;)
thingiverse
free
1/10 EP Touring Car by P5i
...shaft (2 pairs) tamiya trf shock absorbers (or something similar universal connecting rods (3 pairs) a handful of m3...
grabcad
free
1/10 RC Shock Absorber Suspension
...1/10 rc shock absorber suspension
grabcad
1/10 rc shock absorber suspension
thingiverse
free
Tarmo4 Rc Car 3562SL Motor mount + Motor to gear adapter by TsirMAN7
... do is to make two holes on the chassis to place the front screws.
also you need an adapter to link the motor with the input gear
thingiverse
free
Efficient Landing Gear for Large RC Plane by Gazz117
....
---> this is literally the first modeling project i have ever done, if you have any comments or suggestions i'm open!
Erikw
thingiverse
free
Snowmobile 1:10 Fully functional by Erikw
...end to use a smaller high torque engine.
please send me your questions and i will update with more information. video coming soon
thingiverse
free
Dehumidifier by Erikw
...x30mm but you can use smaller once.
i glued it together with hot glue. i have no data for efficiency and liter/hour but it works.
thingiverse
free
Cooling duct for ReprapPro mendel by Erikw
...w
thingiverse
a slim and effective cooling duct for reprappro mendel. attach it with two m3 screws to the spare hot end bracket.
thingiverse
free
Durable, water resistant, Drone (D.W.R.D) by Erikw
... 600mw transmitter and a runcam owl 700tvl
if there is some info missing. write it in the comments and i will update this summary
Snowmobile
3d_export
$159
Yamaha Apex Snowmobile 3D Model
...mtx apx snowmobile snowbike snow scooter 2010 2011 2012 fun sport fast japan
yamaha apex snowmobile 3d model squir 30862 3dexport
archive3d
free
Snowcore 3D Model
...snowcore 3d model archive3d snowmobile snowcore snowcore n240707 - 3d model for interior 3d...
3d_ocean
$89
BRP Ski-Doo Expedition Sport 2012
...-doo doo expedition products recreational ski ski -doo snow snowmobile speed sport winter the 3d model was created on...
cg_studio
$99
Snowmobile Arctic Cat F5703d model
...
.3ds .lwo .max .obj .xsi - snowmobile arctic cat f570 3d model, royalty free license available, instant download after purchase.
3ddd
$1
LEGO Technic
...lego technic 3ddd lego , конструктор lego technic - snowmobile (8272) lego technic - quad bike (9392) модельки делались...
cg_studio
$60
NKL-26 Aerosan3d model
...military nkl-26 aerosan soviet union red army transport dt snowmobile gabtu aerosled world war ii low poly .3ds .max...
cg_studio
$149
Yamaha Apex Snowmobile 20113d model
....c4d .fbx .lwo .max .obj - yamaha apex snowmobile 2011 3d model, royalty free license available, instant download after purchase.
3d_export
$99
Snowmobile Arctic Cat F570 3D Model
...imobile arctic car ac arcticcat ac700 ac-700 700 winter wintersport sport
snowmobile arctic cat f570 3d model squir 9798 3dexport
3d_export
$10
Snowmobile 3D Model
...snowmobile 3d model
3dexport
snowmobile
snowmobile 3d model maxscorp 65456 3dexport
3d_export
$60
NKL26 Aerosan 3D Model
...nkl-26 aerosan soviet union red army transport military dt snowmobile gabtu aerosled world war ii nkl26 aerosan 3d model...
Rc
3ddd
$1
Roberto Cavalli RC 13003b
...roberto cavalli rc 13003b
3ddd
roberto cavalli
обои roberto cavalli и industrie emiliana parati spa, rc 13003b
3d_ocean
$25
RC F1
...rc f1
3docean
auto car control f1 formula race rc remote speed
remote control f1 car
3d_ocean
$19
Braid 4 RC wheel + tyre
...heel (tire + rim + brake disc + caliper) has 30.700 polygons (not smoothed). i didn’t applied (collapsed) a smooth modifier on...
3d_ocean
$89
Lexus RC 2014
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
3ddd
$1
LG G2 smartphone
...3g (hspa+42mbps / hspa+21mbps) lte (svlte, csfb, ca, volte, rc, mimo) dimensions ** 138.5 (l) x 70.9 (w) x...
3ddd
$1
Робот-пылесос "Karcher RC 3000"
... робот , пылесос
робот-пылесос "karcher rc 3000"
3ddd
$1
Kuppersberg RC 699 ANT BRONZE
...kuppersberg rc 699 ant bronze
3ddd
kuppersberg , духовой шкаф
электрический духовой шкаф
3ddd
$1
Klipsch
...klipsch rf-83 floorstanding speaker, rt-12d subwoofer, rs-62 surround speaker, rc64 center speaker модели детальные, по размерам, с текстурами. 148370...
cg_studio
$99
RC buggy model3d model
...o
.3ds .c4d .fbx .lwo .max .obj .xsi - rc buggy model 3d model, royalty free license available, instant download after purchase.
3ddd
$1
BOSS RC-2 Loop Station
...rc-2 loop station
3ddd
гитарный эффект boss rc-2
педаль позволяет записать аудио, наложить петли друг на друга, закольцевать их.