Power Wrench by stormtrooperguy

Last crawled date: 3 years, 2 months ago

This is a quickly made model of the power wrench used by pit droids in Star Wars as seen here: https://starwars.fandom.com/wiki/Power_wrench
There are other models out there, but I wanted something that I could print without supports, and where each color piece could be painted separately then assembled.
It is built around a 1/4 dowel for the main body. It should be 425mm long (I know, mixing metric and imperial measurements. I have learned to think in mm, but local hardware stores don't share that).
There is also a 1/4 rod that is visible. A file exists in this thing, but really... printing dowels should only be done in desperation at 2am! That said... if you are desperate at 2am, I suppose you could always stretch the rod piece out to 425 and print it? I don't know... I don't judge.
The jaws of the wrench have 2 alignment posts each, designed to use 1.75mm filament or wire. They will need to be glued, but these help make sure they line up where they should be.