Power Cube (2-6s LiPo to 5V USB power adapter) by stylesuxx

Last crawled date: 3 years, 1 month ago

2-6S LiPo to 5V USB power adapter. Ideal for all RC enthusiasts who also need 5V on the go - and you know you need it (eg. to charge your phone, smaller flight packs, your transmitter or power your goggles).
You will need the following parts:
5V, 3A USB DC/DC converter
Battery Buzzer
XT60 connector
Small screws(optional)
Print top and bottom, the attached stl's are the customizers default. You might want to play around with clearance if top and bottom do not fit, or adjust any other parameter you see fit.
I sanded the bottom part down to make it nice and flat for later assembly.
Insert the 5V USB PCB into the bottom part, you can screw it in, or simply glue it in. Add wires to your XT60 connector before gluing it in place. Strip your battery buzzer from its protective shrink wrap, test fit the pin header in the slot and glue the buzzers to the case. Make sure none of the parts is moving. Solder the wires from the XT60 connector to the USB PCB.
Now put together top and bottom in any direction you like. The parts should hold together well enough so you can easily glue them together.