Thingiverse
piZero pi1541 Enclosure by evanevery
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is an enclosure for the piZero based pi1541 commodore drive replacement.
I'm not a fan of snap together boxes so this enclosure can be held together with a single #4 x 1-1/4 screw. Optionally, you can also use 4 short #3 screws up from the underside of the base.
I'm not a fan of snap together boxes so this enclosure can be held together with a single #4 x 1-1/4 screw. Optionally, you can also use 4 short #3 screws up from the underside of the base.
Similar models
thingiverse
free
pi1541 Box by evanevery
... enclosures so this one uses #4 screws to hold it together. #4 x 1" inch will work but #4 x 1-1/4 or 1-1/2 would be better!
thingiverse
free
Pi1541 Rasberry Pie Case by mamejay
...hingiverse
pi1541 raspberry pi case to suit the pi1541 from www.melbourneconsolerepros.com
user x 4 m3*16mm self tapping screws.
thingiverse
free
Pi1541 Case by blockmind
.../2018/07/pi1541io-revision-3/
it can be ordered by here:https://www.pcbway.com/project/shareproject/pi1541_io_adapter__rev_3.html
thingiverse
free
PiZero OctoPi case + USB hub and enternet by kristakos
...sb hub and enternet by kristakos
thingiverse
this is simple enclosure for pizero cheap usb hub and enc28j60
design is under work
thingiverse
free
Bus Pirate V3.6 (Sparkfun) Enclosure by bollandj
...losure by bollandj
thingiverse
an enclosure for the v3.6 bus pirate. fits together with 4 m3x12 screws (and corresponding nuts).
thingiverse
free
Pizero Support for ZeroCam by Funkypiwy
... band, keeps the support and the pizero case together.
an additional version with action cam compatible support, is also provided
thingiverse
free
Kryoflux Case by evanevery
...'m not a fan of snap together boxes so this enclosure is held together with four #3 screws up from the underside of the base.
thingiverse
free
SuperCard Pro Enclosure by evanevery
...his is a box/enclosure for the supercard pro usb/floppy controller. its a simple design of two halves held together by 4 screws.
thingiverse
free
Pi1541 Case for Pihead on RPI by lutzbellmann
...he pi1541 on a raspberrypi 3 inkl. display.
assembly is done with 3 smallish screws. slots for all ports available incl. sd card.
thingiverse
free
Ikea Lack Enclosure Fire Extinguisher Mount by emitter_coupled
... of an ikea lack-based enclosure.
the holes in the back are sized for 1" long 1/4-20 screws with a wing nut for tightening.
Evanevery
thingiverse
free
ZoomFloppy Box by evanevery
...zoomfloppy box by evanevery
thingiverse
a simple box to protect your zoomfloppy board!
thingiverse
free
pi1541 Box by evanevery
... enclosures so this one uses #4 screws to hold it together. #4 x 1" inch will work but #4 x 1-1/4 or 1-1/2 would be better!
thingiverse
free
Commodore 1541 Replacement Faceplate by evanevery
...;middle strut" on the side of the "finger cavity" as the door mechanism needs that area clear to operate properly!
thingiverse
free
Bit-C-128 Gonbes GBS-8220 Dual VGA Case for Commodore 128 by evanevery
...apter). lots of folks selling these but no one publishing any case designs. so here is one.
prints completely without supports.
thingiverse
free
Kryoflux Case by evanevery
...'m not a fan of snap together boxes so this enclosure is held together with four #3 screws up from the underside of the base.
thingiverse
free
TOM MK6/MK7 Extruder Modular Connector Bracket by evanevery
...t angle header without the locking fingers, but the above parts list is what i started with and i know it will fit the bracket...
thingiverse
free
Acrylic Case for ThingOMatic (TOM) by evanevery
...holes - as i did).
i added some led strip lighting to the top of my case, but that is nothing that needed any mods to the design.
thingiverse
free
Glass Tom Case using 5mm Acrylic by kai
...relief and other holes for additional fan mount. however, evanevery#39;s design is made for 5.5mm~5.9mm thickness board which won't...
thingiverse
free
Filament Spindle Bushing and Lock Collar by evanevery
...rough the hole in each each locking collar to hold them in place. unscrew and release one side when its time to change filament.
Pi1541
thingiverse
free
Pi1541 Case by blockmind
.../2018/07/pi1541io-revision-3/
it can be ordered by here:https://www.pcbway.com/project/shareproject/pi1541_io_adapter__rev_3.html
thingiverse
free
A very compact pi 1541 case by AnOnion
...by anonion thingiverse a case to fit the unusual pi1541 pi hat board i got off of ebay which...
thingiverse
free
Pi1541 zero (case) remix by Chorozonjp
... chorozonjp
thingiverse
remix of pi1541 zero case designed by porywacz_zwlok - each part as a separate file for easier printing.
thingiverse
free
PI1541 Case 1541-II by AndersE
...ocate the iec port to the back.
it will also need a piezo disc to use sound (the one in the kit is a buzzer which does not work).
thingiverse
free
[REMIX] Case for Pi1541 Zero & Epyx Fastload Combo Cartridge by MrLurch
...pcb layout.
also simplified for easier printing
if you want the full detail; print his: https://www.thingiverse.com/thing:4541283
thingiverse
free
Pi1541 Rasberry Pie Case by mamejay
...hingiverse
pi1541 raspberry pi case to suit the pi1541 from www.melbourneconsolerepros.com
user x 4 m3*16mm self tapping screws.
thingiverse
free
Commodore 64 Pi 1541 Case by rustlemills
...pi1541. links: pi1541 software & setup: https://cbm-pi1541.firebaseapp.com/ pi1541 hat: https://www.ebay.co.uk/itm/pi1541raspberry-pi-hat-for-commodore-64-128-vic20-with-oled-buzzer-status-leds-/254365366581 raspberry pi:...
thingiverse
free
Pi1541 Transparent case for the Pi1541 HAT by @edu_arana by arananet
...e: https://www.arananet.net/pedidos/product/pi1541-convert-your-raspberry-pi-3-into-a-full-compatible-1541-c-drive/
regards,
edu.
thingiverse
free
Pi1541 Case + Displayholder for Quimat 3,5" Display by Tormentor22
...mp;psc=1) which i use to navigate through my images. the covers snap in. i suggest to print the case cover with a little support.
thingiverse
free
Pi1541-II Case by chrisjh
....
links:
https://backofficeshow.com/blog/2018/7/21/behold-the-commodore-1541-disk-emulator-hat
https://cbm-pi1541.firebaseapp.com
Pizero
thingiverse
free
PiBox Zero Box (modulable screwless case) and IQAudio box by HeeBoo
...for the iqaudio zero dac to stack on the pizero ...
thingiverse
free
Gameboy Advance mini by Nochii
...(i too lazy to make tutorial) battery place between pizero and hat. mini amplifier can place anywhere there still...
thingiverse
free
Pi02HQ - PiZero - HQ Cam Connector/Base & Gooseneck by posixp
...s a thin bottom which is to be removed after print (for added bed adheasion).
enjoy!
and as always - if you like, please like it!
thingiverse
free
PiZero Screwless Camera Housing - Under Cabinet by tdaly001
...et by tdaly001
thingiverse
made the base thicker so i could hang it from under a cabinet and the the camera would clear the lip.
thingiverse
free
pikvm zero by badsmoke
...by badsmoke thingiverse a housing for the pikvm as pizero as a suitable csi-hdmi module i have used this...
thingiverse
free
Li-Ion Battery-Powered PiZero Screwless Camera Housing by walterw
...3 or v2.
10) a class 10 microsd card, 16gb should be enough
11) soldering iron and some tools
see below for further instructions.
thingiverse
free
SeeMeCNC Rostock Max V3.2 Camera Mount by Flabioman
...cable attached) motioneyes image for raspberry pi zero https://github.com/ccrisan/motioneyeos/wiki/supported-devices pizero casehttps://www.thingiverse.com/thing:1886598 and backing plate and swivel fromhttps://www.thingiverse.com/thing:2873677 you will...
thingiverse
free
PiZero Volumio Adafruit Oled Bonnet Case by michp
...ps://www.thingiverse.com/thing:2914257
the musical notes on the front are from https://freesvg.org/musical-notes-silhouette-image
thingiverse
free
Pizero Support for ZeroCam by Funkypiwy
... band, keeps the support and the pizero case together.
an additional version with action cam compatible support, is also provided
Enclosure
cg_studio
$10
Gates3d model
...wrought iron gate roma fence entry entrance wall barrier enclosure ornament garden metal street decoration mansion house .fbx .max...
archive3d
free
Fence 3D Model
...fence 3d model archive3d fence barrier gate enclosure fence 2 n050814 - 3d model (*.gsm+*.3ds) for exterior...
archive3d
free
Fence 3D Model
...fence 3d model archive3d barrier fence enclosure fence - 3d model (*.gsm+*.3ds) for exterior 3d...
archive3d
free
Fence 3D Model
...fence 3d model archive3d fence barrier enclosure fence n230813 - 3d model (*.gsm+*.3ds) for exterior 3d...
archive3d
free
Fence 3D Model
...fence 3d model archive3d fence barrier enclosure fence n141112 - 3d model (*.gsm+*.3ds) for exterior 3d...
archive3d
free
Fence 3D Model
...fence 3d model archive3d fence barrier enclosure fence n210414 - 3d model (*.gsm+*.3ds) for exterior 3d...
archive3d
free
Fence 3D Model
...fence 3d model archive3d fence barrier enclosure fence n160514 - 3d model (*.gsm+*.3ds) for exterior 3d...
archive3d
free
Fence 3D Model
...fence 3d model archive3d fence barrier enclosure fence 4 - 3d model (*.gsm+*.3ds) for exterior 3d...
archive3d
free
Fence 3D Model
...fence 3d model archive3d fence barrier enclosure fence n170315 - 3d model (*.gsm+*.3ds) for exterior 3d...
archive3d
free
Fence 3D Model
...fence 3d model archive3d fence barrier enclosure fence modern - 3d model for interior 3d...