Thingiverse
Pergo VER 2 Robo3D R1 (and plus) true 370 mm Y rails upgrade by Pergo
by Thingiverse
Last crawled date: 3 years ago
You got a bed that is 15" long but can't print more than 9" !!! Not anymore!!!
With my mod, you can truly print on every square mm of the 15" x 10" glass.
But you say wait you can really do that because PLA and ABS will peal off the bed once you get past the heater. Right you are but with my 600 Watt bed heater upgrade,http://www.thingiverse.com/thing:1300095
I can truly print a 360 mm long object that won't warp off the glass.
Some extras about this version:
This part is more accurate, durable, and a much better fit than the Version 1. This says a lot because I printed with my version 1's for about 2 years. This is a quality part with a lot of experience behind it. I really feel a difference with the smoothness of the glide down the full length of the Y axis. With the below print settings these ends are even lighter than the version 1's. This is due to the ribs I used on each of the glass supports. Another benefit is that the glass is now centered between the housing of the white case. I shifted the entire bed 6 mm to the right to accomplish this.
Print settings
Use 6 shells and a 12% infill and print at .31 mm layer height if you can.
Print the model as is for the Front piece and MIRROR the part Z axis for the back part.
Position part on it's back with the legs sicking up, then rotate to 45 degrees to make it fit on your bed.
Print the Front (part)...
Then to Print the Back (part)......
Cura:
Select Part, Mirror, Y, Print it
Matter Control Users:
Select EDIT, then Click Mirror Y, Print it
Simplify3D:
Menu item [Mesh][Mirror Mesh][Mirror Z] , Print it
Others:
Buy Simplify3D! :P really, its awesome!
Install:
Now you have the part and a mirrored version of the part printed.
Get a drill that is the closest you have to 8 mm but a tad less and drill out the spots where the 8 mm rods go. leave at least 4-5mm. Don't drill all the way through!
Lay your glass and the ends on the floor facing the floor and measure the rod length you need based on how far you drilled your 8mm into the ends holes. (I made them 7.9mm, a bit tight so you could get a tight fit when you install it) measure the length of rod you need based on how far you drilled. For me it was 20" long.
https://www.amazon.com/gp/product/B00WJFRIIQ
Cut 2 of the 8mm bars to a length of about 20 inches based on what you found above, It's better to be a bit long than short. you can cut again. I used a Dremel Sawmax with he metal cutter grinding wheel and wow cut like butter!
DON'T JAM THE 8MM RODS INTO THE ENDS YET!!! You might not get them out with the tight fit and then you will break the ends getting the rods out!
Put the rods in the Pillow blocks (the rectangles that hold the 8 mm bars on the printer)
do a test fit with the length of your rods.
Happy with test fit??
Now you can put the rods into the Mirrored BACK end you printed. you may have to use a hammer get them the seat all the way.
Then with the rods on still in the pillow blocks, put the printed FRONT end on the 8mm rods too. Make sure it glides easy.
1x 525mm (approx.) GT2 Belts : http://www.amazon.com/gp/product/B00FM5SC2Q/ref=oh_aui_detailpage_o06_s02?ie=UTF8&psc=1 (comes with 1150mm of belt and 2 pulleys.)
If all is good, Now install the new GT2 belt, test fit in making sure your belt teeth are to the left as you look at the front of the printer. Put the belt ends into the retainer blocks from your old bed. make sure that your belt has a bit of slack. Best to be long and cut it down when you see how much you need. Tighten the front and back screws taking up the slack until you have good tension on the belt. Rock your bed back and forth making sure you have a good "glide". At this point your ready to see if your printer likes the new bed. Keep in mind that we did NOT flash the printer firmware yet still giving you a way back if something is not right.
Tell your printer to Auto-Home. If you like everything you see. Go ahead and flash the printer with either the firmware I provided that will specify 0-370mm Y max length. I also already have the Graphic Controller in this firmware. Here are the values I have in this version for max limits. Note there is a (pound) sign if from of each "define" line but the editor here hides it.
// Travel limits after homing
define X_MAX_POS 214
define X_MIN_POS 0
define Y_MAX_POS 370 <------ Max Y limit
define Y_MIN_POS 0
define Z_MAX_POS 201
define Z_MIN_POS 0
Comment here or Private message me if you need help.
-Pergo !
ps..
YES that is a piece of everyday, standard, window glass, from the Home Depot 1/16" glass (16 x 20") that I cut to 15" x 10" to use as a build surface on top of my Neoceram. I chipped my NeoCeram a few times not waiting for a part to cool down after a print. I've got no less than 100+ prints off this regular glass with no problems. The yellow print I did around the extreme outer perimeter was ABS and didn't stick too good but that's a 370 mm print. My heat only extends to the 355 mm mark. but I can stretch it to 360 with short objects.
With my mod, you can truly print on every square mm of the 15" x 10" glass.
But you say wait you can really do that because PLA and ABS will peal off the bed once you get past the heater. Right you are but with my 600 Watt bed heater upgrade,http://www.thingiverse.com/thing:1300095
I can truly print a 360 mm long object that won't warp off the glass.
Some extras about this version:
This part is more accurate, durable, and a much better fit than the Version 1. This says a lot because I printed with my version 1's for about 2 years. This is a quality part with a lot of experience behind it. I really feel a difference with the smoothness of the glide down the full length of the Y axis. With the below print settings these ends are even lighter than the version 1's. This is due to the ribs I used on each of the glass supports. Another benefit is that the glass is now centered between the housing of the white case. I shifted the entire bed 6 mm to the right to accomplish this.
Print settings
Use 6 shells and a 12% infill and print at .31 mm layer height if you can.
Print the model as is for the Front piece and MIRROR the part Z axis for the back part.
Position part on it's back with the legs sicking up, then rotate to 45 degrees to make it fit on your bed.
Print the Front (part)...
Then to Print the Back (part)......
Cura:
Select Part, Mirror, Y, Print it
Matter Control Users:
Select EDIT, then Click Mirror Y, Print it
Simplify3D:
Menu item [Mesh][Mirror Mesh][Mirror Z] , Print it
Others:
Buy Simplify3D! :P really, its awesome!
Install:
Now you have the part and a mirrored version of the part printed.
Get a drill that is the closest you have to 8 mm but a tad less and drill out the spots where the 8 mm rods go. leave at least 4-5mm. Don't drill all the way through!
Lay your glass and the ends on the floor facing the floor and measure the rod length you need based on how far you drilled your 8mm into the ends holes. (I made them 7.9mm, a bit tight so you could get a tight fit when you install it) measure the length of rod you need based on how far you drilled. For me it was 20" long.
https://www.amazon.com/gp/product/B00WJFRIIQ
Cut 2 of the 8mm bars to a length of about 20 inches based on what you found above, It's better to be a bit long than short. you can cut again. I used a Dremel Sawmax with he metal cutter grinding wheel and wow cut like butter!
DON'T JAM THE 8MM RODS INTO THE ENDS YET!!! You might not get them out with the tight fit and then you will break the ends getting the rods out!
Put the rods in the Pillow blocks (the rectangles that hold the 8 mm bars on the printer)
do a test fit with the length of your rods.
Happy with test fit??
Now you can put the rods into the Mirrored BACK end you printed. you may have to use a hammer get them the seat all the way.
Then with the rods on still in the pillow blocks, put the printed FRONT end on the 8mm rods too. Make sure it glides easy.
1x 525mm (approx.) GT2 Belts : http://www.amazon.com/gp/product/B00FM5SC2Q/ref=oh_aui_detailpage_o06_s02?ie=UTF8&psc=1 (comes with 1150mm of belt and 2 pulleys.)
If all is good, Now install the new GT2 belt, test fit in making sure your belt teeth are to the left as you look at the front of the printer. Put the belt ends into the retainer blocks from your old bed. make sure that your belt has a bit of slack. Best to be long and cut it down when you see how much you need. Tighten the front and back screws taking up the slack until you have good tension on the belt. Rock your bed back and forth making sure you have a good "glide". At this point your ready to see if your printer likes the new bed. Keep in mind that we did NOT flash the printer firmware yet still giving you a way back if something is not right.
Tell your printer to Auto-Home. If you like everything you see. Go ahead and flash the printer with either the firmware I provided that will specify 0-370mm Y max length. I also already have the Graphic Controller in this firmware. Here are the values I have in this version for max limits. Note there is a (pound) sign if from of each "define" line but the editor here hides it.
// Travel limits after homing
define X_MAX_POS 214
define X_MIN_POS 0
define Y_MAX_POS 370 <------ Max Y limit
define Y_MIN_POS 0
define Z_MAX_POS 201
define Z_MIN_POS 0
Comment here or Private message me if you need help.
-Pergo !
ps..
YES that is a piece of everyday, standard, window glass, from the Home Depot 1/16" glass (16 x 20") that I cut to 15" x 10" to use as a build surface on top of my Neoceram. I chipped my NeoCeram a few times not waiting for a part to cool down after a print. I've got no less than 100+ prints off this regular glass with no problems. The yellow print I did around the extreme outer perimeter was ABS and didn't stick too good but that's a 370 mm print. My heat only extends to the 355 mm mark. but I can stretch it to 360 with short objects.
Similar models
thingiverse
free
Printrbot Simple X upgrade. by iamjonlawrence
... on the ends of the rods and not bind the bed leveling screws.
design inspired by ahaer http://www.thingiverse.com/thing:215294
thingiverse
free
Pergo Robo3D R1 (and plus) true 330mm Y rails upgrade by Pergo
...will be printing with nozzle jammed against the bed.
here's a possibility for a heated bedhttp://www.amazon.com/dp/b011u7ayx4
thingiverse
free
A4-3D-Printer (PepRap/Prusa i3) by Choose
...ce the bed in front before locking the right front stop and place the bed in back position before locking the right back stopper.
thingiverse
free
Pergo Bed Stiffeners by Pergo
... block sits. if you upgraded to a 300 mm length bed heater, you had better use abs or nylon which has a higher glass temperature.
thingiverse
free
Pergo Embroidery Rack by Pergo
...f you have a robo 3d you can do it too! just replace the belt, rods and print 2 of thesehttps://www.thingiverse.com/thing:2216671
thingiverse
free
Vision Printer Y Belt Tensioner by psutex
... it may be insignificant,but i believe that this belt line of action is what we want.
updates and pictures as needed will follow.
thingiverse
free
OneUp Bed Replacement by kmenigoz
...rts on my oneup at a 45 degree angle to make them fit on the print bed. these parts are currently being used on my oneup printer.
thingiverse
free
A602 Y axis smooth rod 8mm end guide by titi974
...to the front and/or back plate of the a602 printer, it guides the y axis smooth rod to keep it stable.
hope you guys enjoy it !
thingiverse
free
Tevo Tarantula 8mm Rod Y-Axis and Printed Bed Support by evil_k
....thingiverse.com/thing:1580899
other brackets on bottom of tevo tarantula by thingirob: https://www.thingiverse.com/thing:1457449
thingiverse
free
Rigidbot spool holder cap- fits 8mm rod - adapted for mounting on back by guysoft
...ach end of the rod)
this is a remix that lets you mount the spool on the back or the front of the ridigbot using the original rod
Pergo
thingiverse
free
Pergo Leatherman Wave Exacto Knife Bit by Pergo
...erman wave exacto knife bit by pergo
thingiverse
i was asked to create an exacto knife blade for the leather man wave. so i did.
thingiverse
free
Pergo Phone Tablet Case Opener Tool by Pergo
...;bisket" parts to keep it open while you move to another section of the case.
hope it work for you as well as it did for me.
thingiverse
free
Pergo Robo3D Pillow Blocks For Aluminum Casting by Pergo
...ut with air compressor. be sure you use safety gear. bury it in your sand, (this caps the bottom hole) and pour in the aluminum.
thingiverse
free
Pergo Bird Food Dish by Pergo
...hat have 14 mm bar spacing.
for best results print upright as it would be in the cage (with bottom on the glass) and use supports
thingiverse
free
Pergo ROBO3D R1+ Marlin 1.1 bug fix (with manual bed leveling) by Pergo
...his "//#define reverse_menu_direction"
reverses our encoder (knob) so that it increments values when turned clockwise.
thingiverse
free
Pergo PVC (1/2") Bird Food-Water Dish by Pergo
...rinted surfaces the ones that face the birds. 3-4 shells or layers will make a good water tight seal. print with a 10-15% infill.
thingiverse
free
Pergo Singer Sewing machine 401A Thread Spindle by Pergo
... sewing machine 401a thread spindle by pergo
thingiverse
this is a replacement thread spindle for the singer 401a sewing machine
thingiverse
free
Pergo Singer Sewing Machine 401A Bobbin Loader Rubber Wheel by Pergo
...rgo
thingiverse
this is a replacement part for the singer 401a sewing machine.
this must be printed in something like ninjaflex.
thingiverse
free
Pergo Sewing Clipper Case by Pergo
...ure to the cutters and release when the cutter is inside of the case. they will stay in the case even if you shake it now.
enjoy!
thingiverse
free
Pergo WEN 414CV Cross Slide Vise for WEN 4208 8 in.Drill Press by Pergo
...; 5/16" 3/8" 1/2"high speed steel hss 4 flute straight end mill cutterhttps://www.amazon.com/gp/product/b00zzyju2u
Robo3D
turbosquid
$2
Robo3D Feet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Spool Holder For Small Hole Spool by CalculatedChaos
...thingiverse i designed this spool holder for odd sized robo3d spools of filament that are 4" wide with a...
thingiverse
free
Robo3D R1+ LCD Panel Bracket by rodsmith
...hat the photos show the mount glued to a screen in its housing and
mounted on the printer. the rendering shows this thing alone.)
thingiverse
free
Robo3D R1+ / Bigtreetech SKR Pro Adapter Mount by rodsmith
...a lot without supports, and the bridge on the micro-sd mount will also droop a lot, necessitating more cleanup, without supports.
thingiverse
free
Robo3d R1 Y Belt Holder by kengeer
...akes it easier to install the belt than the original. also the nut inserts on the top, so it can't fall out if it gets loose.
thingiverse
free
Robo3d to laser by rjsacus
...the laser, attach focus wheel, attach the laser to mount then mount on carriage.
then i change hotend mintemp to 0 in firmware.
thingiverse
free
Depth Gauge by rjsacus
...depth gauge to set height of laser for my robo3d ...
thingiverse
free
CR-10 V3 X-Axis Modular Mount Base by Zikeji
...zikeji thingiverse recent adventures necessitated i move from my robo3d r1+ (an antiquity at this point) to a newer...
thingiverse
free
Redragon GW900 Mount for Modular Mounting System by Zikeji
...segment. i've taken my original design used for the robo3d r1+ mount and made it a little more...
thingiverse
free
BTT TFT 7.0 V3.0 enclosure with slant at top edge by MakeJeff
...to attach the screen to the front of my robo3d made it a 6 hour print. the screen will...
370
3d_export
$99
Nissan 370z Nismo 2014 3D Model
...an car 2015 2016 sport coupe jdm tuning nissan fl facelifting nismo 370 370z
nissan 370z nismo 2014 3d model squir 84627 3dexport
3ddd
$1
светильник Urano Illuminazione
...illuminazione люстра illuminazione коллекция - urano размеры- 550 х (h)370 ...
3ddd
$1
Фонари и часы ARTE DALPOZZO
...мм, и 160*160*440. часы настенные arte dalpozzo диаметр - 370 мм. в архиве присутствует файл...
3ddd
$1
LUXIT Arki Tek 370
...luxit arki tek 370
3ddd
luxit
выполнен по чертежам
3ddd
$1
Isa Corsi Art 2600
...d 600 x h 1900 mm art 2602 d 370 x 200 x h 150 mm art 2603 d...
3ddd
$1
Eiken stoel in sloophout
...eek piet hein eek eiken stoel in sloophout ширина 370 мм глубина 470 мм высота 840...
3ddd
$1
Шкаф Орента арт0871с 2
...0871с прав. высота 2154 мм ширина 402 мм глубина 370 ...
3ddd
$1
Унитаз-компакт напольный Vitra Form 500 9730В003-1165
...vitra коллекция: form500 унитаз устанавливается вплотную к стене размер: 370 х 655 х 845 мм материал: сантехнический фарфор цвет:...
3ddd
$1
Люстра Lussole Sasso LSX-3506-07
...мм: 1200 --мин. высота , мм: 800 --диаметр, мм: 370 цвет плафонов: хром материал плафона: металл цвет основания: никель,...
3ddd
$1
table good news by Mokasser
...good news by mokasser 3ddd mokasser , журнальный h -370 w - 700 l - 700...
R1
3ddd
$1
Часы Стиль
...размер 45х45 см механизм hermle (германия) стрелки хромированные артикул r1 часы стиль - это современные веяния и новый стиль,...
3d_ocean
$5
R1 rim
... tire tuner tuning tyre vehicle wheel
a r1 rim modeled to specs. for more car-related objects, please do visit my profile. enjoy!
3d_ocean
$15
3DOceans Rotating Studio
.... for both c4d standard engine [r12-r14] and v-ray [r1.. ...
3d_ocean
$12
Witch Hat and Broom
...your project with power of 3d-witchcraft traditions. cinema 4d r1.. ...
3ddd
$1
Лепная розетка R1
...лепная розетка r1
3ddd
розетка
лепнина, лепной декор, розетка, stucco, rosettes
cg_studio
$129
Yamaha YZF-R1 20093d model
...gstudio
.3ds .lwo .max .obj .xsi - yamaha yzf-r1 2009 3d model, royalty free license available, instant download after purchase.
cg_studio
$129
Yamaha YZF - R1 20103d model
...
.3ds .c4d .fbx .lwo .max .obj - yamaha yzf - r1 2010 3d model, royalty free license available, instant download after purchase.
3ddd
$1
Decorative set. Scandinavian style
...из магазинов в москве. пользуемся! ниже список используемых предметов: 1.http://dg-home.ru/catalog/domashniy_ofis/dekorativnaya_tablichka_na_dver_you_are_welcome_or_not/?utm_source=inmyroom&r1=yandext&r2;= 2.http://www.danish-store.ru/collections/candles/products/trajheim#ancor#ancor 3.http://www.danish-store.ru/collections/all-furniture/products/gustavo?variant=886325393#ancor 4.http://www.danish-store.ru/collections/lightning/products/1920s#ancor#ancor 5.http://www.danish-store.ru/collections/lightning/products/flaske-b#ancor#ancor 6.http://www.inmyroom.ru/products/15552?context=dekor 7.http://www.danish-store.ru/collections/tables/products/rony#ancor#ancor 8.http://www.ikea.com/ru/ru/catalog/products/50259247/ 9.http://www.ikea.com/ru/ru/catalog/products/70234072/ 10.http://www.ikea.com/ru/ru/catalog/products/90268872/ ...
3ddd
free
r1
...r1
3ddd
кольцо , ювелирное украшение
кольцо, сделано в свободное от работы время )
cg_studio
$15
T wheel R13d model
...t wheel r13d model
cgstudio
.3ds - t wheel r1 3d model, royalty free license available, instant download after purchase.
Ver
3ddd
$1
Мягкая мебель DLS Челси
...turbosmooth) ->кол-во вершин: 135946(без применения turbosmooth) -> форматы: *max ver2014 *autodesk fbx -все объекты и материалы имеют логические названия....
3ddd
$1
Пуф Sicis Next Art VERS LE SOLEIL POUFF
... vers le soleil , пуф
размеры
160см*160см*48см
3ddd
$1
Magnolia Arrangement
...цветы в архиве maxvray+maxcorona+fbx mодель пересохранена в 2011 pol.-270,060 ver-288,571 высота композиции 160см сглаживание через use nurms subdivision уже...
3ddd
$1
Набор Aqwella Verona в 3 цветах
...40
умывальник bergamo 1000
артикул ber.10.04.d
размер 1000х500х110http://aqwella.ru/catalog/five_stars.html?id=1254
3ddd
$1
Ver Design / NOTTURNA
...ver design / notturna
3ddd
ver design
http://www.verdesign.it
3ddd
$1
Tao Coffee Table ver design
...ddd
ver design , журнальный
tao coffee table ver designhttp://www.verdesign.it
3ddd
$1
Ver Design стол
...ver design стол
3ddd
ver design
...
3ddd
$1
Карпентер Белый
...->кол-во вершин: 17 318(без применения turbosmooth) -> форматы: *max ver2014 *autodesk fbx -все объекты и материалы имеют логические названия....
3ddd
$1
Кушетка Жозефина
...->кол-во вершин: 53 013(без применения turbosmooth) -> форматы: *max ver2014 *autodesk fbx -все объекты и материалы имеют логические названия....
3ddd
$1
Natuzzi Tempo 2834 armchair
...armchair 3ddd natuzzi , tempo natuzzi tempo 2834 armchair ver.048 *.max *.fbx *.obj 141cm x 108cm x 77cm...
True
3d_ocean
$15
Selling 3D Models True Secrets of 3D Artists book
...edited to better reading - added some screenshots - added 9 pages more, 43 overall now this is a bundle of 2 products: 3d mode...
3ddd
$1
Диван Виола, производитель D'LineStyle
...дополнительная опция: бельевой ящик. polys: 23.672 verts: 11.900 textures: true scale: true uvw map:...
3ddd
$1
GLOBE ZERO 4 / TRUE LOVE
... 4 / true love
3ddd
globe zero 4 , om
globe zero 4 - true love
1,55 mb
www.globezero4.dk
3ddd
$1
Gus Modern Thatcher Sofa
...stainless steel base help to make this sofa a true original. the sofa frame is constructed with 100%certified wood,...
3ddd
$1
LEGO SW Imperial Shuttle
...minifigures - all textures inside - rotation groups with true axis - 350k polys - 230x175x215 mm. - fbx...
3ddd
$1
Villeroy&Boch, True Oak
...ace-mounted-washbasin-round-514801.html, http://www.villeroyboch.ua/bw/m/true-oak-furniture-frame--a880q1.html
3ddd
$1
Jean Prouve Standard Chair
...and now produced by vitra, this piece is a true design classic. the frame is in lacquered steel, while...
3ddd
$1
NAIAD AMBER
...the generous fluidity, and curves give this lamp a true artisan feel. this design is individually crafted and will...
3ddd
$1
Сборник 1: Модульная декоративная картина (15 шт)
..."красный жасмин" (450 х 650), "summertime" (800 х 1200), "true blue" (700 х 700). 2) постер "чёрно-белый дуэт" (700...
3ddd
$1
EDISON wood lamp
...hanging pendant lamp e27 edison bulb light fixture lights holderhttp://ru.aliexpress.com/item/edison-wood-lamp-handmade-retro-arts-bar-wooden-chandelier-hanging-pendant-lamp-e27-edison-bulb-light/32350204007.html?spm=2114.10010208.100005.1.nlfvzz&isorigtitle;=trueamp;nbsp; ...
Upgrade
3d_export
$199
Stadium Level 6 Day 3D Model
...sidewalk city architecture element block gameready unity lowpoly football upgrade people stadium level 6 day 3d model fabelar 90971...
3d_export
$199
Stadium 04 3D Model
...modular pathway sidewalk city architecture element block lowpoly football upgrade people stadium 04 3d model download .c4d .max .obj...
cg_studio
$37
Car service Level 73d model
...modular city architecture element block game gameready unity lowpoly upgrade mechanic vehicle repair jack tyre .obj .max .fbx .dae...
cg_studio
$29
Fan shop Level 33d model
...shop level 33d model cgstudio fan shop building modular upgrade city soccer game lowpoly polygonal merchandise supporter tshirt clothing...
cg_studio
$25
Casino Level 13d model
...model cgstudio casino roulette tables american chips building modular upgrade city gambling game lowpoly polygonal tree column fountain architecture...
cg_studio
$37
Casino Level 73d model
...model cgstudio casino roulette tables american chips building modular upgrade city gambling game lowpoly polygonal tree column fountain architecture...
cg_studio
$41
Casino Level 93d model
...model cgstudio casino roulette tables american chips building modular upgrade city gambling game lowpoly polygonal tree column fountain architecture...
cg_studio
$31
Car service Level 43d model
...modular city architecture element block game gameready unity lowpoly upgrade mechanic vehicle repair jack tyre .obj .max .fbx .dae...
cg_studio
$29
Car service Level 33d model
...modular city architecture element block game gameready unity lowpoly upgrade mechanic vehicle repair jack tyre .obj .max .fbx .dae...
cg_studio
$33
Fan shop Level 53d model
...shop level 53d model cgstudio fan shop building modular upgrade city soccer game lowpoly polygonal merchandise supporter tshirt clothing...
Plus
3d_export
$30
3 bedroom maisonette plus swimming pool 3D Model
...s swimming pool 3d model
3dexport
house swimming building
3 bedroom maisonette plus swimming pool 3d model camarra 59238 3dexport
3ddd
$1
Hd pvr 2 ge plus
...hd pvr 2 ge plus
3ddd
hd pvr 2 ge plus
hd pvr 2 ge plus
3d_ocean
$15
Iphone 6S Gold
...flagship galaxy ios iphone mac new os pc phone plus s6 samsung six smartphone x a very accurate model...
3d_ocean
$15
Iphone 6S Rose Gold
...flagship galaxy ios iphone mac new os pc phone plus s6 samsung six smartphone x a very accurate model...
3d_ocean
$15
iPhone 6S
...high realistic model of iphone 6 and iphone 6 plus it can be used as a production model without...
3d_ocean
$5
Billard Balls
...low poly billiard balls. numbering from 1 to 15 plus the cue ball. each of the balls excluding the...
3d_ocean
$9
Ninja blue
...position made in blender include fbx 1024 texture image plus normal...
3d_ocean
$15
Iphone 6S Space Gray
...flagship galaxy ios iphone mac new os pc phone plus s6 samsung six smartphone x a very accurate model...
3d_export
$30
Iphone 6S Space Gray 3D Model
...iphone 6s space gray 3d model 3dexport iphone six plus new flagship phone smartphone apple computer pc ios mac...
3d_ocean
$15
Samsung Galaxy S6 Edge+ White Pearl
...3docean edge five flagship galaxy new note note5 phablet plus s6 samsung smartphone stylus a very accurate model of...
Rails
3d_export
$15
Wall decorative accessory 3D Model
... accessory contemporary style design industry modern materials 3d max
wall decorative accessory 3d model butterfly 30268 3dexport
3d_export
$15
Classic Steam Train 3D Model
...ocomotive metal old power rail railroad railway retro smoke station steam steel
classic steam train 3d model jronn 65890 3dexport
3d_export
$6
Baroque frame stucco 3D Model
...harmony rail border
baroque frame stucco 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl deckorator 104402 3dexport
3d_export
$9
Balcony 04 3D Model
...ls element railing fence fencing
balcony 04 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl fabelar 102755 3dexport
cg_studio
$29
Low poly mine cart3d model
...cgstudio mine cart iron coal ore miner underground mining rails tracks dumper bin excavating gold antique tool equipment metal...
cg_studio
$8
Horse jump obstacle 083d model
...ckey show
.fbx .max .3ds .obj - horse jump obstacle 08 3d model, royalty free license available, instant download after purchase.
cg_studio
$3
Forged railing3d model
...tion iron railing
.obj .max .fbx .3ds - forged railing 3d model, royalty free license available, instant download after purchase.
3d_export
$15
Freight Container 3D Model
...teel box crate truck load
freight container 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl firdz3d 107094 3dexport
cg_studio
$3
Forged railing 33d model
...on railing wall
.obj .max .fbx .3ds - forged railing 3 3d model, royalty free license available, instant download after purchase.
cg_studio
$8
Horse jump obstacle 043d model
...ckey show
.obj .max .fbx .3ds - horse jump obstacle 04 3d model, royalty free license available, instant download after purchase.
Y
3ddd
$1
Mexico Diabolo chair
...destino de playa favorito de actores y famosos de hollyood: acapulco, méxico. medidas generales 69cm x 69.5cm x 64...
3ddd
$1
Игровой автомат Gaminator fv629
...игровой автомат gaminator fv629. polys: 14 864 x: 570mm y 415mm z:...
3ddd
$1
Букет сирени
..., букет , ваза polys: 331007 габаритные размеры: x-545mm, y525mm, ...
3d_ocean
$59
FABRIC TEXTURES PACK 001
...use it for texturize cloth, characters or anything what y.. ...
3d_ocean
$59
FABRIC TEXTURES PACK 004
...use it for texturize cloth, characters or anything what y.. ...
3d_ocean
$59
FABRIC TEXTURES PACK 003
...use it for texturize cloth, characters or anything what y.. ...
3ddd
$1
Orchid bouquet 2.0
....obj overall dimensions of model: x = 450 mm y = 460mm z = 745 mm the archive contains...
3ddd
$1
DUNE - PAN DE ORO
...de oro que le darán a cualquier ambiente elegancia y sobriedad. es ideal para combinar con blancos, negros y...
3d_export
$6
Lucienne Monique Y 30 3D Model
... model lucienne 30
lucienne monique y 30 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl deckorator 104223 3dexport
3ddd
$1
Кровать Шато HRL0-LG, тумба прикроватная открытая Шато HRC1 и плитка 1900 от Vives Azulejos y Gres
.../mebel-provence/kollekciya-chateau.html
3.плитка
производитель:vives azulejos y gres
коллекция:1900
размеры:200х200мм
Mm
3d_export
$35
Makarov 9mm pistol 3D Model
...makarov 9mm pistol 3d model
3dexport
gun weapon pistol 9-mm 9mm makarov
makarov 9mm pistol 3d model lubomir88 22086 3dexport
3ddd
$1
Pillow Finn
...time finn the pillow from adventure time. size: 500x500 mm ...
3ddd
$1
SMANIA Biblo 09
...biblo , библиотека wooden bookcase/showcase, 3 wooden shelves 40 mm th., lighting pipe and polished stainless steel details code:...
3ddd
$1
BAYERN IVORY
...cable: ivory twisted dimensions full height with shade: 700 mm base height: 415 mm base width: 310...
3ddd
$1
Стол журнальный BOITE L, BAXTER S.R.L.
...1600 mm, глубина (d): 800 mm, высота (h): 330 mm детали: основа: массив дерева отделка: зеркальное стекло зеркало:...
3ddd
$1
houzz / Coastral Living-Retreat Table Desk
...письменный coastral living-retreat table desk (7 finishes) width: 1200 mm depth: 600 mm height 760 mm polycount: 23796/107796 polys...
3ddd
$1
Люстра ANDREA
...технические детали: масса 19.00 kg мощность 18x40w измерение 950×750 mm картон 520x360x520 mm сертификация...
3ddd
$1
Charlotte Morgan Blue Abstracts
...эту модель в 3d рендерах для фотостоков. scene in mm the model is made in real scale. charlotte morgan...
3ddd
$1
Charlotte Morgan Hand Painted Silver Fingerprints
...эту модель в 3d рендерах для фотостоков. scene in mm the model is made in real scale. charlotte morgan...
3ddd
$1
кресло Petit Repos
...stitch) color (cosy): pebble grey seat height: 16" (405 mm glides: hard glides...
2
3d_export
$15
Pendant lamp Original BTC Stirrup Pendant Size 2 3D Model
...al btc stirrup black stainless steel silver
pendant lamp original btc stirrup pendant size 2 3d model pluscreative 90616 3dexport
3d_export
$99
Buick Skylark convertible 1964 3D Model
...model 3dexport buick skylark 1964 1965 1966 1967 classic 2door coupe sport convertible general motors us american buick skylark...
3d_export
$99
Suzuki Jimny 2013 3D Model
...2015 2016 2-door suv crossover off-road 4x4 mini compact small japan japanese
suzuki jimny 2013 3d model humster3d 72012 3dexport
3d_export
$99
Chevrolet El Camino 1959 3D Model
...us american chevrolet el camino 1959 3d model humster3d 7425 ...
3d_export
$10
2 Thuya trees 3D Model
...2 thuya trees 3d model
3dexport
thuya tree evergreen plant
2 thuya trees 3d model buncic 32968 3dexport
3d_export
$99
Audi R8 Coupe 2013 3D Model
...2012 2013 2014 2015 2-door coupe sport luxury sportcar racing german germany
audi r8 coupe 2013 3d model humster3d 64432 3dexport
3d_export
$95
Falcon3D A319 United Airlines 2 3D Model
...enger modern twin jet civil civilian a320 a321 a318 a319 airbus
falcon3d a319 united airlines 2 3d model falcon3d 68618 3dexport
3d_export
$99
Jaguar E type coupe 1961 3D Model
...type coupe 1961 3d model 3dexport jaguar e-type type 2door coupe 1961 1961–1974 uk sport racing sportcar muscle british...
3d_export
$99
Aston Martin DB4 1958 3D Model
...3d model 3dexport aston martin db4 1958 1963 1958-1963 2door coupe sport car sportcar super racing luxury aston martin...
3d_export
$99
MAN TGS Skip Loader Truck 2012 3D Model
...011 2012 2013 2014 2-axis heavy industrial trucks germany german
man tgs skip loader truck 2012 3d model humster3d 70332 3dexport