Motorcycle change dispenser (quarters only) by GeneCash

Last crawled date: 3 years, 1 month ago

This holds more than two full rolls of quarters ($20) for toll roads, far more than the usual $2.25 capacity, and it skips the useless nickels and dimes slots. The coin slot is designed so you can still slide out quarters using slick leather motorcycle gloves.
The short one is cheap/quick to print.
The tall one allows you to insert steel rods as weights in the top so the last few quarters dispense much better. I used a couple of 1" diameter by 1" long steel spacers from McMaster-Carr #92415A153 (kinda expensive at $14 but I didn't have anything to cut steel rod...) - unfortunately the pictures don't show this.
It's meant to be bolted to an AMPS compatible mount such as the RAMmount.com RAM-B-238, using two #10-24x2" bolts. This can then be mounted on a motorcycle using the standard RAM ball mount systems, which will adapt to fit any motorcycle or handlebar setup. The pictures show the mount bolted on. This also means you can remove it in 30 seconds if you want to slip it out of view into a tankbag while you shop.
MAKE SURE YOU USE NYLOC LOCK NUTS. I had engine vibration loosen the standard nuts.
I've included the FreeCAD files I used to design it.
Print it with 15% fill, and "support on build plate only" checked.