Thingiverse
moDRO by maot1985
by Thingiverse
Last crawled date: 3 years ago
I bought some callipers for my XY-table on my drill stand. I will upgrade them in the future with a display.
As I am not good in soldering on breadboards I redesigned the the plan from Scrachi and designed a little PCB (65mm x 65mm) in Fritzing. Hopefully everything is wired correct :-D
2017-09-16:
There is now a second PCB (65mm x 55mm). The display I have lying around has a i2c connection, so this PCB should fit it and the rest of the digital and analog ports are free to use.
A big thank you for Scrachi, who made the base for this PCB - thumbs up!
(the STL files are the ones from Scrachi)
Update 2017-10-10
I adapted the ino-File from Scrachi to the NewLiquidCrystal-Library from https://bitbucket.org/fmalpartida/new-liquidcrystal/downloads/
The LCD-address can be found with this little sketch from https://playground.arduino.cc/Main/I2cScanner
I hope I made no mistake
As I am not good in soldering on breadboards I redesigned the the plan from Scrachi and designed a little PCB (65mm x 65mm) in Fritzing. Hopefully everything is wired correct :-D
2017-09-16:
There is now a second PCB (65mm x 55mm). The display I have lying around has a i2c connection, so this PCB should fit it and the rest of the digital and analog ports are free to use.
A big thank you for Scrachi, who made the base for this PCB - thumbs up!
(the STL files are the ones from Scrachi)
Update 2017-10-10
I adapted the ino-File from Scrachi to the NewLiquidCrystal-Library from https://bitbucket.org/fmalpartida/new-liquidcrystal/downloads/
The LCD-address can be found with this little sketch from https://playground.arduino.cc/Main/I2cScanner
I hope I made no mistake
Similar models
thingiverse
free
Electronic case and PCB for DIY Twinstar by Scrachi
...be edited on arduino code).
<= if you like my work, you can tip me on thingiverse :-)https://www.thingiverse.com/scrachi/about
thingiverse
free
Sodastream CO2 bottle support by Scrachi
...to prevent the bottle fall.
<= if you like my work, you can tip me on thingiverse :-)https://www.thingiverse.com/scrachi/about
thingiverse
free
15*15*1.5 corner foot by Scrachi
...inum banana pi server case.
<= if you like my work, you can tip me on thingiverse :-)https://www.thingiverse.com/scrachi/about
thingiverse
free
CR-10S single PCB Stand Alone Stock Display Case
...cr-10s single pcb stand alone stock display case
thingiverse
adaption for my cr-10s display
thingiverse
free
ring display by ruben_zilzer_3409
...y studio,
i added a little flexibility for holding the rings
and also printed the 10% bigger and 10% smaller cover all the sizes.
thingiverse
free
housing for 9V block an little pcb by ringo2k
...rent schematic like: http://laserpointerforums.com/attachments/f67/41896d1369541996-constant-current-diode-driver-easy-driver.jpg
thingiverse
free
Pi 7" 2020 display mount by snowcapjr
...g:1840373 made by thelost. i just stretched it out a bit to attach to all mounting points on the display. sketchup file included.
thingiverse
free
Spanner tray Rev 2 by Scrachi
...to 19mm magnusson spanners.
<= if you like my work, you can tip me on thingiverse :-)https://www.thingiverse.com/scrachi/about
thingiverse
free
Pen Stand
...pen stand
thingiverse
pen stands i made to display my turned pens. files for 1, 5, and 10 pens.
thingiverse
free
PCB Holder for 3D printer bed by plapointe6
...ccess, but etching pcb with chemicals was a fail.
used in pair with my sharpie holder : https://www.thingiverse.com/thing:4598914
Maot1985
thingiverse
free
Knobs by maot1985
...printing you can press din934 nuts into the knobs. for the star knobs there are small round plates, which can also be pressed in.
thingiverse
free
Vacuum pads by maot1985
...me simple designs of vacuum pads.
for my little cnc i wanted to have some vacuum holders. they are quite small and easy to print.
thingiverse
free
Vinyl Cutter by maot1985
...e a selfmade wooden cnc. for the roland-vinyl-cutter i needed a holder. the holder i designed is spring-loaded with rubber bands.
thingiverse
free
Mixer 30mm by maot1985
...n has a mouth of 35mm. i made her a 30mm mixer. using a m8 cutter, an m8 threaded rod and a nut, the mixer was quickly assembled.
thingiverse
free
moMPCNC by maot1985
... used in prusa printers. the belt tension will be placed on the carriages and the stepper motors on the top of the corner posts.
thingiverse
free
Hammock Rain Protection by maot1985
...ickness.
glue the pieces over the ring with some hot glue so that no water can flow between the printed parts and the steel ring.
thingiverse
free
PL55 stopper by maot1985
...er/scheppach-zubehoer-set-/p/20749949).
use a m6 nut, a din912 m6 bolt and a m6 lever (e.g. from misumi) and you are ready to go.
thingiverse
free
Clamp M8 by maot1985
...he clamp in black pla from bq. layer height 0,3mm, 50% infill. the base is printed with supports generated by autodesk meshmixer.
thingiverse
free
Kindle Fire ridgeline mount by maot1985
...et in from the side and hang the mount on the ridgeline.
you need two threaded rods m5x140,10 nuts m5 and two bolts din912 m5x25.