Thingiverse
Clamp M8 by maot1985
by Thingiverse
Last crawled date: 3 years ago
I needed a clamp for my DIY workbench. In my bench, I use a aluminium profile 17mm x 10mm from Sauter (https://www.sautershop.de/fraestisch-selber-bauen/aluminium-brprofilschiene/aluminium-profilschiene/).
The clamp needs a M8x100 bolt, a M8 nut and washer.
You can hold down about 50mm on the workbench.
I printed the clamp in black PLA from BQ. Layer height 0,3mm, 50% infill. The base is printed with supports generated by Autodesk MeshMixer.
The clamp needs a M8x100 bolt, a M8 nut and washer.
You can hold down about 50mm on the workbench.
I printed the clamp in black PLA from BQ. Layer height 0,3mm, 50% infill. The base is printed with supports generated by Autodesk MeshMixer.
Similar models
thingiverse
free
Clamp for workbench
... hold down things, mainly wood, but also i should be able to quickly release it without completely remove it from the workbench.
thingiverse
free
Clamp M5 by maot1985
...he clamp in black pla from bq. layer height 0,3mm, 30% infill. the base is printed with supports generated by autodesk meshmixer.
thingiverse
free
CNC Bed Clamp Adjustable and knob for M8 by sovtek
...washer for each.
included is a quick knob that can be used to tighten m8 bolts.
i printed mine in petg and they work well so far.
thingiverse
free
Multipurpose clamp by vonPongrac
...i use it in cable management on my office desk, as tool holder on my workbench and as pipe clamp in my balcony irrigation system.
thingiverse
free
Desk Clamp for 40x40 Aluminium Profile by shootdackel
...desk clamp for 40x40 aluminium profile by shootdackel
thingiverse
needed a way to clamp a 40x40 mm aluminium profile to my desk.
thingiverse
free
coupler by runaway380
...h and rigid enough to hold my gopro on my workbench
this coupler is a 46degrees bent for 14mm squared aluminium so the stand too
grabcad
free
Series 8 Profile sliding Tee nut
...are nut.
i use a lot of aluminium profile and this has worked for me.
this is my first upload - constructive criticism welcome!
thingiverse
free
Playseat Challange clamp by WorlockM
...re and therefore i needed a shorter clamp. i recommend printing in petg because i broke one of my clamps that was printed in pla.
thingiverse
free
CNC table clamp for M8 (8mm) bolt by micolo
...o use m8.
i designed it from scratch but idea was taken from original project. moreover i added two pivots with different height.
thingiverse
free
Workmate Workbench pegs by Iggy-the-Swott
...lacement clamp pegs for any workmate/workbench that has 20mm holes. the versions with lugs will need to be printed with supports.
Maot1985
thingiverse
free
Knobs by maot1985
...printing you can press din934 nuts into the knobs. for the star knobs there are small round plates, which can also be pressed in.
thingiverse
free
Vacuum pads by maot1985
...me simple designs of vacuum pads.
for my little cnc i wanted to have some vacuum holders. they are quite small and easy to print.
thingiverse
free
Vinyl Cutter by maot1985
...e a selfmade wooden cnc. for the roland-vinyl-cutter i needed a holder. the holder i designed is spring-loaded with rubber bands.
thingiverse
free
Mixer 30mm by maot1985
...n has a mouth of 35mm. i made her a 30mm mixer. using a m8 cutter, an m8 threaded rod and a nut, the mixer was quickly assembled.
thingiverse
free
moMPCNC by maot1985
... used in prusa printers. the belt tension will be placed on the carriages and the stepper motors on the top of the corner posts.
thingiverse
free
Hammock Rain Protection by maot1985
...ickness.
glue the pieces over the ring with some hot glue so that no water can flow between the printed parts and the steel ring.
thingiverse
free
PL55 stopper by maot1985
...er/scheppach-zubehoer-set-/p/20749949).
use a m6 nut, a din912 m6 bolt and a m6 lever (e.g. from misumi) and you are ready to go.
thingiverse
free
moDRO by maot1985
...
the lcd-address can be found with this little sketch from https://playground.arduino.cc/main/i2cscanner
i hope i made no mistake
thingiverse
free
Kindle Fire ridgeline mount by maot1985
...et in from the side and hang the mount on the ridgeline.
you need two threaded rods m5x140,10 nuts m5 and two bolts din912 m5x25.
M8
3d_ocean
$19
M8 Tank
...my game ready low poly m8 military tank us vehicle world war
low poly m8 world war 2 us tank, 2048×2048 diffuse texture included.
3d_ocean
$15
HTC One M8
...you see, were rendered in maya without any 3rd party plugin and photoshop manipulation! materials : maya and cinema 4d materia...
3ddd
$1
Wooder Miola Model M8
...wooder miola model m8
3ddd
wooder , дверь
дверь wooder, коллекция miola, модель m8
3d_export
free
barrett m8
...barrett m8
3dexport
in maya 2019 for free low poly<br>convert to .stl
turbosquid
$24
AN-M8 Smoke Grenade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Polar Grill M8
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
M8 Smoke Grenade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$17
HTC One M8
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$49
HTC M8 Gray3d model
...tphone
.max .obj .mb .lwo .fbx .c4d .3ds - htc m8 gray 3d model, royalty free license available, instant download after purchase.
3d_ocean
$15
Htc one m8
...e screen) like image preview and it included in maps folder as (screen, screen2, screen3) - the preview images were rendered o...
Clamp
3d_export
$11
clamp
...clamp
3dexport
clamp
3ddd
free
Clamp
... enricо zanolla , капитоне
дизайнерenrico zanollмодель clamp
3ddd
$1
Clamp
...ricо zanolla , капитоне
дизайнеры
enrico zanolla
andrea di filippo
модель clamp
dzstudio
3d_export
free
clamp
...clamp
3dexport
simple clamp model, more free 3d models here:
3d_export
$5
clamping handle
...clamping handle
3dexport
clamping handle
3ddd
$1
Clamp / DZstudio
... dzstudio , капитоне
люстра clamp от dzstudio/enrico zanolla(италия).
3ddd
$1
Светильник Clamp
...светильник clamp
3ddd
clamp
стеганый светильник clamp в двух цветах в черном и белом.
turbosquid
$29
clamp
...ty free 3d model clamp for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1442049)
turbosquid
$29
clamp
...ty free 3d model clamp for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1442041)
3d_export
$5
Clamp-14
...clamp-14
3dexport
3d model of clamp name 14