Thingiverse
Microquad 65mm Smiley by KevinKuwata
by Thingiverse
Last crawled date: 3 years, 1 month ago
Created a solid frame for F3 Evo board from bang good. Uses a combination of pressfits to mount the camera, the motors, and the flight controller.
Can uses 55mm or 65mm props. Designed for 65mm and is about 64g total weight with a 720mah battery.
Utilize rubber bands (dental bands) for holding battery in place.
Tight fit for motor mounts to prevent wires from being removed from the base of the motors.
The previous version of this where the frame was 2 grams lighter, did not increase performance enough to justify the constant breaking of motor wires.
The camera mount and camera info can be found here: http://www.thingiverse.com/thing:1734830
Can uses 55mm or 65mm props. Designed for 65mm and is about 64g total weight with a 720mah battery.
Utilize rubber bands (dental bands) for holding battery in place.
Tight fit for motor mounts to prevent wires from being removed from the base of the motors.
The previous version of this where the frame was 2 grams lighter, did not increase performance enough to justify the constant breaking of motor wires.
The camera mount and camera info can be found here: http://www.thingiverse.com/thing:1734830
Similar models
thingiverse
free
Micro frame 16x16 mounting by takeshikun
...eant for 110x motors and 16x16 flight controller. has tabs to help use rubber bands to hold the battery and aio camera in place.
thingiverse
free
MicroQuadie by MiguelDK
...s.
the frame and the top is kept together with small rubber bands, to simplify assembly.
it flies well with betaflight. have fun!
thingiverse
free
DJI PHANTOM 95mm FPV Frame - 1103 Motors by Flowr
...u can use some rubber bands too) and for camera mount use two screws m1.6 10mm
if you print one, pls post pictures! thanks ! :)
thingiverse
free
Minimal frame for 65mm props and 8.5mm motors by KevinKuwata
...e the mass to be roughly 11 grams. which is a 40% weight reduction from my other fpv microquad frame. i will update with results.
thingiverse
free
Blade NanoQx Frame for Ladybird by bagwan
...bird motors
also you can use other lipos.
use a rubber band for the battery and cam
use double sided tape to mount the fc and cam
thingiverse
free
ReP_AL Whoop RC by ReP_AL
...mera frame (use hot glue if needed for an extra strong fix)
use an elastic band around the quad for the battery
go flying!! :)
thingiverse
free
FPV Adjustable Camera Mount by Painless360
...image too.
use two small screws (spare ones from an old servo mount are perfect) to connect the two pieces.
thanks for looking!
thingiverse
free
Lowrider Camera Mount and Battery Holder for Emax NanoHawk by RekursiV
.... the camera goes in the hole in the front, held in place by another much smaller rubber band. camera tilt angle is 10 degrees.
thingiverse
free
smaller 57mm hubsan x4 replacement frame (h107) by alpinedrones
... (hubsan h107c) online
update 2: as pointed out, the diagonal is 80.6mm
87mm version: http://www.thingiverse.com/thing:532432
thingiverse
free
Sony Action Camera Mount FDR-X1000V for Quad Frame Cherry Craft Supreme 5" by Perugino
...ed into the mount from the top and a battery strap is used to hold the camera in place. a cover protects the camera from a crash.
Kevinkuwata
thingiverse
free
Lexus GX470 Front Dash Ash Tray Switch Panel by KevinKuwata
...s....
usb outlets are from amazonhttps://www.amazon.com/gp/product/b08rz326y1/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1
thingiverse
free
Minimal frame for 65mm props and 8.5mm motors by KevinKuwata
...e the mass to be roughly 11 grams. which is a 40% weight reduction from my other fpv microquad frame. i will update with results.
thingiverse
free
DYS 1104 65mm props by KevinKuwata
...tage.
update of version 9 with support for 65mm props and use of 1104 dys be motors
implementing motor guards.
you need supports
thingiverse
free
Lexus key replacement by KevinKuwata
...osition to be more accurate.
please do not sell. fits ls430 2001; let me know what other models it will work for to update this.
thingiverse
free
All in One (AIO) micro brushless 65mm props by KevinKuwata
...r mount exactly where it transitions to the thinner portion of the arm (directly under the motor)
please do not sell this design.
thingiverse
free
Tool Holder (Peg Board) by KevinKuwata
...and tools used in electronics work.
print with support. petg. 0.6mm layer height, 0.8mm nozzle.
replaces traditional peg board.
thingiverse
free
LED LIGHT for Helping Hands by KevinKuwata
...an be detached so that it can be placed around a component with minimal deconstruction of the helping hands.
it uses m3 hardware.
thingiverse
free
8.5 mm Brushed Quad by KevinKuwata
...d decrease from 100% does not result in descent. in a large field and minimal wind its fun to fly. something to get you into fpv.
thingiverse
free
Crazepony 200mw FPV camera housing by KevinKuwata
...tenna/dp/b01hgasz1m/ref=sr_1_cc_2?s=aps&ie=utf8&qid=1472055123&sr=1-2-catcorr&keywords=fpv+camera+crazepony+200mw
Microquad
thingiverse
free
20 x 20 Standoff for m2 screws by shadow00693
...a 20 x 20 standoff for fc/esc stack for microquad. i am using this on my acrobrat build but...
thingiverse
free
PawxSpec Whoop | microquad racing fpv drone frame by Pawx
.... i'm just telling you how i like to print my frame so that its 2.3 grams and strong. :)
enjoy!!
https://youtu.be/waymjjqeikq
thingiverse
free
Micro Copterframe 100mm 16x16 Stack by R3br0d0n
...r3br0d0n thingiverse i have draw a new model for microquad for a 16x16 stack. that was the version 1...
thingiverse
free
TINYWHOOV EXTRA LIGHT - 3D PRINTED VERSION (V4) by Badassdrones
...others : it's a micro rc hovercraft based on microquad electronics (check scratchbuild version to know more). still super...
thingiverse
free
Tie Fighter MicroQuad by Barry_Barrera
...tie fighter microquad by barry_barrera
thingiverse
fly and rnjoy your new tie fighter microquad
thingiverse
free
Antenna Guard for ulflindestrom's Brushed FPV Microquad by henbach
...p://www.thingiverse.com/thing:1398182) and needed some more protection for my vtx antenna, so i made this little bolt on antenna.
thingiverse
free
IxI by touchthebitum
...ixi by touchthebitum thingiverse small weight 85mm microquad fpv project. custom made frame touchthebitum in pla motors...
thingiverse
free
Minimal frame for 65mm props and 8.5mm motors by KevinKuwata
...is a 40% weight reduction from my other fpv microquad frame. i will update with...
thingiverse
free
FPV Micro Drone Quadcopter StarCopter V by EduardoChamorro
...eduardochamorro thingiverse this is a microcopter developed for a microquad workshop in fab lab seoul. fpv equipment embedded under...
Smiley
3ddd
$1
Миска для орехов "Smiley Bowl".
...uot;smiley bowl".
3ddd
орех
миска для орехов "smiley bowl".
материалы: corona, vray.
дополнительно: obj, fbx.
3d_ocean
$19
3D Emoticons
...emoticons expression hulk human torch iron man marvel smile smiley spiderman superhero thing venom wolverine this 3d emoticon package...
3d_ocean
$5
Cup of Coffee
...dish drink face food hot kitchen realistic restaurant smile smiley spoon sugar texture *originally created in blender 3d. exported...
3d_ocean
$4
Smiley 3d Model
... model
3docean
birthday children circus cute easter festival fun funny happy joy party school smile smiley yellow
smiley 3d model
3d_ocean
$18
3D Smiley Faces
...ts with expressions ,all are created in 3ds max 2010 , each model is represented in a .max file, textures are included , thanks .
cg_studio
$59
Smiley3d model
...e fbx character characters obj
.obj .fbx .max - smiley 3d model, royalty free license available, instant download after purchase.
humster3d
$75
3D model of Lifan 320 (Smiley) 2012
...iled 3d model of lifan 320 (smiley) 2012 in various file formats. all our 3d models were created maximally close to the original.
3d_export
$29
cartoon school bus
...school bus 3dexport model of cartoon school bus with smiley face.<br>ideal for kid shows and kids oriented content.<br>clean mesh...
3d_export
$5
SMILEY CLASSIC NEON
...smiley classic neon
3dexport
classic neon light smiley
3d_export
$7
snow man low-poly
...styles. commonly incorporates branches for arms and a simple smiley face, with a carrot utilized for a nose. clothing,...
65Mm
3ddd
$1
Свечи #1
...#1 3ddd свеча производитель: - модель: свечи размеры: w-40/65mm, d-40/65mm ...
3ddd
$1
Освежающая Водица
...бутылка info: синяя бутылка с водой. dim:высота 280mm ширина 65mm aditional: для рендера с каустикой, нужно отключить галочки affect...
3d_export
$39
Jack Cables 65mm 3D Model
...wire amplifier amplification jack wires coil electronics sport hobby equipment
jack cables 65mm 3d model guitargoa 73403 3dexport
3d_export
free
monster truck wheel toy
...made in fusion 360.<br>- sizes: diameter 135mm, depth - 65mm<br>- formats: 3ds max 2020, max 2017, 3ds, obj, fbx,...
3d_export
$5
golf cart wheel 265 mm
...diameter of this wheel is 265mm and width is 65mm center cross section of wheel is 32mm in which...
3d_export
$6
voxel dog
...verts: 25,191 edges: 75,652 facet: 50,456 tris: 50,456 x 65mm y 40mm z 88mm need a change? write to...
3d_export
$5
alloy wheel plug outer diameter 65mm logo bmw
...r 65mm logo bmw
3dexport
alloy wheel plug outer diameter 65mm + logo b.m.w.<br>archives 3 models. logo, stub, logo + stub
3d_export
$19
Gingerbread cookie 001
...vertex with more than 5 edges: 0<br>object:<br>- dimension mm: 65mm x 99mm x 11mm<br>- dimension cm: 6.5cm x 9.89cm...
3d_export
$19
Gingerbread cookie 007
...vertex with more than 5 edges: 0<br>object:<br>- dimension mm: 65mm x 87mm x 12mm<br>- dimension cm: 6.5cm x 8.7cm...
thingiverse
free
Base para RX o VTX para whoop by Ataca
...0.6 gramos par poder montarle en un tinywhoop de 65mm se terminó de llevar el vtx suelto por encima...