Thingiverse
IxI by touchthebitum
by Thingiverse
Last crawled date: 3 years, 1 month ago
Small weight 85mm microquad FPV Project.
Custom made frame Touchthebitum in PLA
Motors : DP03 7800Kv
Escs : Cicada 6Amp Blheli_s
FC : Piko BLX with Betaflight 3.01 Multishot 8k/4k
Vtx/OSD : Innova (FuriousFPV)
Cam : Banggood micro cam
Lipo : 300mah 2s
Props : FuriousFPV 2435
Weight : 50gr without lipo 66gr with 300mah 2s lipo
14/11/2016 I tried to print a 25% Filaflex and 75% PLA version test. Please see picture.
Custom made frame Touchthebitum in PLA
Motors : DP03 7800Kv
Escs : Cicada 6Amp Blheli_s
FC : Piko BLX with Betaflight 3.01 Multishot 8k/4k
Vtx/OSD : Innova (FuriousFPV)
Cam : Banggood micro cam
Lipo : 300mah 2s
Props : FuriousFPV 2435
Weight : 50gr without lipo 66gr with 300mah 2s lipo
14/11/2016 I tried to print a 25% Filaflex and 75% PLA version test. Please see picture.
Similar models
thingiverse
free
TURNIGY NANOTECH 2S 300MAH LIPO CASE by giek2000
...turnigy nanotech 2s 300mah lipo case by giek2000
thingiverse
case to store 5x turnigy nanotech 2s 300mah 45-90c lipos.
grabcad
free
Turnigy Nanotech 2S 300mAh Battery
...turnigy nanotech 2s 300mah battery
grabcad
lipo battery
model: turnigy nanotech 300mah 2s
thingiverse
free
83mm frame 16mm stack by the_mighty_tibo
...signed for the turnigy nano tech 300mah 2s batterieshttps://hobbyking.com/nl_nl/turnigy-nano-tech-300mah-2s-45-90c-lipo-pack.html
thingiverse
free
16MM MICRO QUAD NANOTECH LIPO MOUNT by giek2000
...thingiverse
16mm battery mount for micro quads. made for nanotech 2s 300mah lipos. print in tpu so it will fit 15/16mm mounting.
grabcad
free
Lipo Battery 300mAH
...lipo battery 300mah
grabcad
lipo battery 300mah. step file and fusion 360 file.
thingiverse
free
Drone Battery Tray by steelbunny500
...ops, to show whether or not the batteries are charged. there are 6 slots for 1s 450mah and 3 slots for 2s 300mah lipo batteries.
thingiverse
free
Ballist-X 115 Micro Kwad by kerst
...ed parts:
emax femto fc
1104 4000kv motors
6/7 amp escs
boldclash 25mw micro cam/vtx (split version)
2s 300mah 35c nano tech lipo
thingiverse
free
Quad fan ducted by touchthebitum
...ngiverse
doinkerlike quad test.
easier to print ;) but ugglier ;)
duct size are 52mm
holes are for the piko blx from furiousfpv.
grabcad
free
2s lipo tray
...2s lipo tray
grabcad
lipo tray for 2s lipo, fits 50 cal ammo can
grabcad
free
460mAh LiPo 2S
...460mah lipo 2s
grabcad
460mah lipo 2s for spacing in mini sumo projects
Ixi
thingiverse
free
NB-2L battery cover by huchasi
...s45, powershot s50, powershot s60, powershot s70, powershot s80, vixi hf r10, vixia hf r100, vixia hf r11, vixia...
thingiverse
free
Rode iXY Shock Mount Spider iPhone holder by Handforged
...rode ixy shock mount spider iphone holder by handforged
thingiverse
this is a shock mount for iphones.
3dfindit
free
Ixi S
...ixi s
3dfind.it
catalog: leucos
grabcad
free
IXYS CPC1706 Normally Open High-Power Solid State Relay
...ne package style)
digi-key source:
https://www.digikey.com/en/products/detail/ixys-integrated-circuits-division/cpc1706y/3077519
cg_trader
free
SolidWorks Weldments Steel Structure 500mm X 200
...zx = 68815636.79 izy = 1317147.44 izz = 12689050.32 steel design architecture outdoors solidworks industrial part industrial part
grabcad
free
Bolt
...g mm^2)
ixx = 331.261
ixy = 0.00
ixz = 0.037
iyx = 0.00
iyy = 331.261
iyz = -0.073
izx = 0.037
izy = -0.073
izz = 10.417
grabcad
free
1g etalon.psm
...,523886 mm
rz= 2,523886 mm
https://novaator.err.ee/541773/konflikt-ohus-kaalu-kaotav-kilogrammi-etalon-vajab-asendust
grabcad
free
CPC1966B
...cpc1966b
grabcad
ixys ssr
grabcad
free
NASA Handrail Clamp
...to each other. by matching the pressure required for fixig is created. angula lace to make sure it is...
Touchthebitum
thingiverse
free
Confort strap mask by touchthebitum
...ced on your neck.
strings pass under ears to avoid pain.
filaflex filament
advice : bear the mask first and after place the strap
thingiverse
free
Chuwi Vi7 Mod by touchthebitum
...chuwi vi7 mod by touchthebitum
thingiverse
here is a case protection in filaflex filament.
you just have to glue it ;)
thingiverse
free
Quad fan ducted by touchthebitum
...ngiverse
doinkerlike quad test.
easier to print ;) but ugglier ;)
duct size are 52mm
holes are for the piko blx from furiousfpv.
thingiverse
free
Touch frame by touchthebitum
....2016 youtube video : https://youtu.be/jytptv3ahos
11/07/2017 dshot protocol added with some test (dshot 150,300 and 600 to do)
thingiverse
free
Prop guard by touchthebitum
...ebitum
thingiverse
filalfex prop guard for this prop :
carbon airmodels swiss made 28x12 4 props
thanks anthony for the photo ;)
thingiverse
free
Flexible Drone keychain by touchthebitum
...chain by touchthebitum
thingiverse
small drone keychain.
printed in filaflex.
it is possible to print it in pla or abs or other.
thingiverse
free
30° Micro Cam case ZMR250 by touchthebitum
... and diameter 6mm
there is a small space for 3 wires from camera
there is a small part of the top of the model in the field view.
thingiverse
free
Aomway FPV CAM protection by touchthebitum
...reased main width. i added an rx case protecting the flight control board which is under.
10/03/2017 added camera roof protection
thingiverse
free
Hormann HSE2-868-BS Protective case by touchthebitum
...e remote.
exclusively to print in filaflex (flexible wire)
9/03/2017 it would be better to apply 2 points of glue on the top cap.