Thingiverse
Magnetic 100mm and 150mm filter mount adapter by Arachnorchis
by Thingiverse
Last crawled date: 3 years, 1 month ago
This allows 100mm and 150mm square filters to be magnetically fixed to these filter adapters:https://www.thingiverse.com/thing:2945377https://www.thingiverse.com/thing:2945769
It is not compatible with any other system.
The filter is encased in a frame with embedded magnets (6 magnets for the 150mm filter, 4 for the 100mm). These can then be snapped onto an adapter which also has embedded magnets. These magnetic mounts are fixed to the top of a traditional style filter mount or can be fixed on their own.
The magnetic adapters are surprisingly secure, can be fully inverted and gently shaken without dislodging. Four pins help to prevent the adapters from sliding off. Use at your own risk.
Designed and printed with ABS, please be aware other materials may affect fit due to shrinkage, or lack of.
Best printed in Black.
Tested with Lee 150mm polarising filter, and Haida 100mm Neutral density filter.
You’ll need:
Countersunk screws M4x10-12mm x10 for 150mm frame. x4 for 100mm frame.
M4 nyloc nuts x10 for 150mm filters. x4 for 100mm filters.
Neodymium magnets 20x10x2mm – x12 for 150mm frame. x8 for 100mm frame. These are the listed measurements for the magnets I purchased, their actual measurements were a little smaller.
Additional 4x M4 countersunk screws to fix to main adapter (length varies depending on configuration).
Directions:
Print part A and B of desired frame size.
Press magnets into their slots, ensure polarity is kept the same.
Insert filter into frame A, fix together with frame B using screws and nuts. Holes may have to be drilled out with a 4mm drill bit first.
Print Mag mount adapters x2, insert magnets into each slot- check polarity with the filter frame, if only using 100mm filters the center slot can be left blank.
Optionally, bottom cover can be glued/bonded to the mount adapter, check magnet polarity with the frame first!
It is not compatible with any other system.
The filter is encased in a frame with embedded magnets (6 magnets for the 150mm filter, 4 for the 100mm). These can then be snapped onto an adapter which also has embedded magnets. These magnetic mounts are fixed to the top of a traditional style filter mount or can be fixed on their own.
The magnetic adapters are surprisingly secure, can be fully inverted and gently shaken without dislodging. Four pins help to prevent the adapters from sliding off. Use at your own risk.
Designed and printed with ABS, please be aware other materials may affect fit due to shrinkage, or lack of.
Best printed in Black.
Tested with Lee 150mm polarising filter, and Haida 100mm Neutral density filter.
You’ll need:
Countersunk screws M4x10-12mm x10 for 150mm frame. x4 for 100mm frame.
M4 nyloc nuts x10 for 150mm filters. x4 for 100mm filters.
Neodymium magnets 20x10x2mm – x12 for 150mm frame. x8 for 100mm frame. These are the listed measurements for the magnets I purchased, their actual measurements were a little smaller.
Additional 4x M4 countersunk screws to fix to main adapter (length varies depending on configuration).
Directions:
Print part A and B of desired frame size.
Press magnets into their slots, ensure polarity is kept the same.
Insert filter into frame A, fix together with frame B using screws and nuts. Holes may have to be drilled out with a 4mm drill bit first.
Print Mag mount adapters x2, insert magnets into each slot- check polarity with the filter frame, if only using 100mm filters the center slot can be left blank.
Optionally, bottom cover can be glued/bonded to the mount adapter, check magnet polarity with the frame first!
Similar models
thingiverse
free
Cokin P 84mm 100mm and 150mm filter holder by Arachnorchis
...available to lift the filter mounts higher if required (for clearing other mounts, bulbous front elements or inbuilt lens hoods).
thingiverse
free
Gopro mount countersunk for M4 locking nuts by GalFisk
... bottom will accomodate the bottom of a snag-prevention shield, for use in skydiving (https://www.thingiverse.com/thing:2432876).
thingiverse
free
Tamron - Pentax 15-30mm 2.8 150mm Filter adapter by Arachnorchis
...ng the outer ring as the two 3d printed threads will have limited strength.
follow basic filter adapter steps above to complete.
thingiverse
free
Renault Clio IV - Speaker Adapter 165mm by Modern_Crafts
...he adapter and the plate you are mounting it to. once the adapter ist mounted the speakers can be screwed in with some m4 screws.
thingiverse
free
pixel slate VESA mount by ChocolateEinstein
...100mm x 100mm vesa mount for a chrome pixel slate.
required hardware:
x8 m3x20
x4 m3x50
x12 m3 nuts
x4 m4x60 or longer
x4 m4 nuts
thingiverse
free
DIN Rail Mount and Plate for Mesa Card 7i76e by EisbaerLars
... the countersunk screws to fix it on the clamps and to be able to cut m3 threads directly into the print instead of using inserts
thingiverse
free
Adjustable Tube Cutting Guide up to 100mm by Bob68
...ne with thread lock in the guide so that it spins.
there are also two holes if you wish to screw it down using countersunk screws
thingiverse
free
Case for filter drawer insert by frondot
... one or for 6 filter insert.
you can use the official filter insert or my filter insert https://www.thingiverse.com/thing:4758644
thingiverse
free
Octoprint Pi3 V-slot 40mm Adapter for Case (Ender 5 & more) by Nomade12
... version)
2x m4 button head socket screw (for screw version)
2x m4 v-slot nut
this is a w.i.p.
i will update this design and info
thingiverse
free
kossel 2020 outer 40mm fan mount by UEPONYA
...kossel 2020 outer 40mm fan mount by ueponya
thingiverse
40mm fan mount
m3x15mm bolt x4
m3 nut x4
m4x12 bolt
m4 2020 slot nut x4
Arachnorchis
thingiverse
free
Pentax 31mm 1.8 Cokin P filter adapter by Arachnorchis
... reduce reflections.
when mounting, mount this adapter to the cokin adapter first, then attach the lens, and then clamp in place.
thingiverse
free
Tamron - Pentax 15-30mm 2.8 150mm Filter adapter by Arachnorchis
...ng the outer ring as the two 3d printed threads will have limited strength.
follow basic filter adapter steps above to complete.
thingiverse
free
Cokin P 84mm 100mm and 150mm filter holder by Arachnorchis
...available to lift the filter mounts higher if required (for clearing other mounts, bulbous front elements or inbuilt lens hoods).
thingiverse
free
150mm Filter adapter/holder by Arachnorchis
...y require a lens mounting ring ~1mm larger than measured (an 85mm lens will generally work best with a ~86mm lens mounting ring).
thingiverse
free
Macro ringflash softbox diffuser for Pentax AF160FC by Arachnorchis
...ra space does improve diffusion at the cost of some light.
suggest printing components with threads at maximum strength possible.
150Mm
3ddd
$1
Anglepoise Type 75 Mini
...mini dimensions: - shade diameter 130mm - shade height 150mm - reach 500mm - base diameter 170mm - cable...
3ddd
$1
Бра настенное 671-01-01 Sunset Silver N-LIGHT
...n-light бра настенное 671-01-01 sunset silver n-light w=219mm h=283mm l=150mm hand...
3ddd
$1
Jielde Loft Twin floor light
...distinct, individual personality, their appeal remains undimmed. shade diameter: 150mm arms: 1 x 1200mm + 1 x 400mm, 1...
3ddd
$1
Tom DIxon Pipe Light
...коллекция светильников pipe light от tom dixon pendant light d=150mm h=650mm wall light d=135mm, h=420mm table light d=130mm,...
3ddd
$1
Римские шторы #4
...3ddd римская производитель: - модель: римские шторы размеры: w-1000mm, d-85/150mm h-1825/300mm римская штора с 9 позициями разных...
3ddd
$1
SLV-NEW POL
...44 фонарь уличный страна / country:usa &germany; габариты :400mm 150mm ...
3ddd
$1
Очки Addidas Сочное Лето
...сочное лето 3ddd очки info: addidas очки dim: длинна 150mm ширина 150mm aditional: мой дизайн очков для адидас. в...
3ddd
free
Настенные часы
...настенные часы 3ddd настенные настенные часы r-150mm ...
3ddd
$1
Светильник (VANAMO PENDANT)
...при вечернем освещении создадут приятную атмосферу. height- 600mm diametr- 150mm 100mm; 80mm; 50mm; 60mm; материал плафонов -прозрачное и матовое...
3ddd
free
iGudzzini - Spark
...уличное и техническое освещение страна / country: италия габариты :150mm h 400mm & h 800mm сайт:http://http://www.iguzzini.it/матерьялы все vray без...
100Mm
3d_export
$25
Juice box 1 3D Model
...sour cream box supermarket market orange apple refrigerator liter 100mm juice box 1 3d model rophaaa 22187...
3ddd
$1
TZ-150
...schmitz-leuchten _http://www.schmitz-leuchten.de _ модель: tz-150 15037.46 размеры одного светильника: w-100mm d-155mm, h-185mm размеры комплекта: w-795mm, d-220mm,...
3ddd
free
Собачьи/кошачьи миски
...h 250mm x 250mm x 460mm маленькая подставка h 100mm x 200mm x 380mm в файле прикреплены составные материалы...
3ddd
$1
Domi Swing Arm Wall Sconce
..._ модель: domi swing arm wall sconce размеры: w-295mm, d-100mm ...
3ddd
$1
Светильник (VANAMO PENDANT)
...вечернем освещении создадут приятную атмосферу. height- 600mm diametr- 150mm; 100mm 80mm; 50mm; 60mm; материал плафонов -прозрачное и матовое градиентное...
3ddd
$1
Настольный светильник от RALPH LAUREN
...table lamp цвет: хром материал: металл размер: база ~ r=100mm формат: 3dsmax2013,3dsmax2010 и fbx, v-ray...
3ddd
$1
Лестница белая
...3ddd габаритные размеры h= 3210mm 3510 х 2110 х 100mm ...
3ddd
free
Indian vase
...- 130mm длинна большой вазы - 600mm, ширина - 100mm высота - 170mm в сцене нет цветка лотоса. лотос...
3ddd
$1
KUTAHYA SERAMIK HORIZON
...plugins/tools _____________________________________ в комплекте плитка размером wall tile size 100mm x 12626mm 600mm x 3000mm 3000mm x 3000mm floor...
3ddd
$1
Подушка #1
...3ddd подушка производитель: - модель: подушка размеры: w-530mm, d-340mm, h-100mm ...
Filter
3d_ocean
$15
Studio HDRi 010
...may use the provided .jpg version that has been filterd with a natural film response algorithm for a much...
3d_ocean
$15
Studio HDRi 003
...may use the provided .jpg version that has been filterd with a natural film response algorithm for a much...
3ddd
$1
Phase Design Ballot Box tables
...tables 3ddd журнальный , ballot phase design ballot box tableshttp://www.phasedesignonline.com/content/design/families/?filterballot-box-family ...
3d_ocean
$6
Energy Bottle
...is divided into 3 parts: the bottle bottom, a filter in the middle, and bottle caps. bottles are polygon...
3d_ocean
$2
Wire mesh
...wire mesh 3docean aluminium brass chain chainlink copper fence filter link mesh metal screen sieve strainer syth wire a...
3d_ocean
$19
Bodum Coffee Press
...beverage bodum cafe cafetiere cappuccino coffee maker cup detailed filter foam french press glass highpoly hot jug kitchen latte...
3d_ocean
$12
Aquarium Water Filter
...
an inside aquarium filter, with no textures. materials, render setup, lighting are not included. 10 650 poligons without smooth.
3d_ocean
$4
Air filter
...ormal texture applied. the texture comes in .tif format. for other cool stuff check out my sales. don’t forget to rate and enjoy!
3d_ocean
$9
Cigarettes and Ashtray
...cigarette (gold logo/filter wrap, silver logo/filter wrap, just logo/no filter wrap). two variations for the filter material are included...
3d_ocean
$1
Cigarette Butts Seamless Tiling
...cigarette cigarette end cigarettes compressed dirty disgusting drug filter filterip garbage heap many nicotine pattern pile repetition seamless stub...
Magnetic
3ddd
$1
Classicon / Styx from Alexander Taylor
...tion and stability.


available finishes:
white with opti white tint glass top.
manufactured by classicon.
3d_ocean
$27
MRI Scanner
...model 3ds max detailed fbx healing health hospital interior magnetic medical medicine mental ray mri scanner obj resonance vray...
3d_ocean
$8
Flipchart
...r flipchart flipover graphs infographic magnets marker office presentation school whiteboard
3d model of a flipchart + accesoires
3d_ocean
$10
Santa Claus Magnet Toy
...rent purposes. these were modelled and prepared for photo-realistic renderings, close-ups, cg visualization. the models are re...
3d_ocean
$5
Paperclips
...paperclips
3docean
clip cup desk magnet office paper paperclip paperclips plastic
some paperclips in a cup
3d_ocean
$2
Magnet
...magnet 3docean 3d 3ds max electric magnet magnetic magnetism max model polygon realistic tesla magnet created in...
3d_ocean
$9
Lensatic Compass
...ion east equipment lens magnet map military mountaineer navigation north south topographic travel voyage west
3d lensatic compass
3d_ocean
$18
Maglev Train
... for easy animation. simply animate the train offset and the train will follow the exact path of the track! rendered on a curv...
3d_ocean
$19
Mini Portable Atom Speaker 3d Model
... and read description carefully before you buy. thanks. it is real world scaled and created from 100% quad faces. render syste...
3d_ocean
$5
Antique Compass
...3docean antique brass compass direction earth expedition explorer magnet magnetic map navigation north old south style tools topographic vintage...
Adapter
3d_ocean
$19
RTS style blue team tank with anim v004
...ue team) adapt for mobile easy team color select .max file with animation .fbx file with animation .obj file is without animation
3d_ocean
$4
SanDisk Memory Card and Adapter
...sandisk memory card and adapter
3docean
this is a 3d model of a sandisk memory card and adapter.
3ddd
$1
Nomades Authentic Ceilin Lights
... khaki, black or transparent, according tot the models
- the heights are adaptable and the chandeliers can be assembled together.
3ddd
$1
Vitra Suita Three Seater Sofa
...ual components that can be freely combined, suita adapts to suit all kinds of design visions, individual styles and environments.
3ddd
$1
lamp.OUTLET
...lamp in its primary mission as well as the adapter sitting on the couch in the living room, or...
3ddd
$1
BD Barcelona Design Showtime
... of a furniture collection meant for the home, but which has the adaptability and the personality needed for contract furnishing.
3d_ocean
$4
Wood Box
...ouse,games,trash,crate,corner,cardboard it is very simple to set up and adapts to all media and the web. please rate it after ...
3d_ocean
$4
Digital Lock
...shopes,office,games,roads,websites,modling,lockers,cabnets,banks it is very simple to set up and adapts to all media and the w...
3d_ocean
$19
RTS style Structure v003
...ike wartime
low poly 3d model of factory building for rts game (with door open animation) adapt for mobile easy team color select
3d_ocean
$1
Porcelain Material
...n reflect vase
porcelain material adaptable to many kitchen accessories such as dishes or also luxury items . thanks for watching
Mount
3ddd
$1
Vega flush mount lamp
...t lamp
3ddd
dimensions: 22.5"wx22.5"dx12"h
размеры: 58см х 58см х 31см
v-ray light included | v-ray light внутри
3ddd
$1
Currey & Company Balthazar
...quality of the glass elements. product name: balthazar ceiling mount dimensions: 21h x 18d x 18w number of lights:...
3d_ocean
$5
Rock_6
...rock_6 3docean mount mountin rock rocks stone rock_6….............1474.polygon. .1476.vertices. 4096 * 4096 texture....
3d_ocean
$19
Low Poly Hotel
...and flower pots, trees, brunches, street lights, trashcans, wall mountd air freshener, air conditioners, fire...
3d_ocean
$25
Low Poly Buildings
...storehouse/warehouse, one grocery/minimarket, flower beds and flower pots, wall mountd air freshener, air conditioners, air intake,...
3d_ocean
$5
rock_4
...rock_4 3docean low polygon mount mountin old rock rock stone rock_4…...............1419.polygon. .1421.vertices. 4096 * 4096...
3d_ocean
$5
mountain_9
...n_9…........................12560 polygon. ...12562 vertices. 4096 * 4096 texture obj , fbx , and blend format model. game ready.
3d_ocean
$25
Low Poly City Block
...and flower pots, trees, brunches, street lights, trashcans, wall mountd ...
3d_ocean
$5
Rock_3
...rock_3 3docean mount mountin rock stone rock_3…..............6048.polygon 6127.point. 4096*4096 texture. obj,fbx,blend format model....
3d_ocean
$5
Rock_2
...rock_2 3docean mount mountin rock stone rock_2…...............3196.polygon 3248.point. 4096*4096 texture. obj,fbx,blend format model....