Thingiverse
i3 Mega 20mm Riser base by clayrev
by Thingiverse
Last crawled date: 3 years ago
2018-12-12 added my gcode files from Jan/Feb 2018. Use at your own risk.
2018-05-24 added Fusion 360 and step files for easier remixing. Hopefully I will get back to modifying this again, but for now, happy remixing.
2018-02-04
In my quest to make my printer more quiet, I came up with this idea since the i liked the power supply cover by ml_blh. (https://www.thingiverse.com/thing:2715000). I installed his cover and 2 new fans. Just doing that decreased the frequency of the PSU fan on time. (also quieter fans are more quiet.) The only trouble with the PSU cover was the base bottom cover did not fit, and I still needed to put the feet on some blocks so the cross bar would not touch the table.
This base is 20 mm tall and attaches with the standard screw locations. (hopefully. I printed the first section with 3mm holes and had to open them up with a drill, but since then have changed the model to 3.5mm) I recommend 20mm long screws and don't tighten them too hard or you could run them into the screen or the PSU cover. The threaded holes for the standard feet are modeled and I had no trouble getting the screws in for them. I did use some longer ones, but I think the stock ones should do well. If you use similar print settings, I don't see why they shouldn't work for you.
There are mounts for two 60x25 fans. I am using Noctua (NF-A6x25FLX) with the "low noise" filter to continuously pull air from the front to the back of the unit. (Only one pictured because I needed to order another one still.) They are wired up to the extra power supply taps and I suspect with them running full time, the PSU fan on time will be lowered even more.
The holes in the front are for a switch I found on Digikey (part number: PRK22J5DBBNN by ZF Electronics.) I use the one for my lights and haven't found a use for the other hole yet, but in the mean time it will just let more air flow through.
2018-05-24 added Fusion 360 and step files for easier remixing. Hopefully I will get back to modifying this again, but for now, happy remixing.
2018-02-04
In my quest to make my printer more quiet, I came up with this idea since the i liked the power supply cover by ml_blh. (https://www.thingiverse.com/thing:2715000). I installed his cover and 2 new fans. Just doing that decreased the frequency of the PSU fan on time. (also quieter fans are more quiet.) The only trouble with the PSU cover was the base bottom cover did not fit, and I still needed to put the feet on some blocks so the cross bar would not touch the table.
This base is 20 mm tall and attaches with the standard screw locations. (hopefully. I printed the first section with 3mm holes and had to open them up with a drill, but since then have changed the model to 3.5mm) I recommend 20mm long screws and don't tighten them too hard or you could run them into the screen or the PSU cover. The threaded holes for the standard feet are modeled and I had no trouble getting the screws in for them. I did use some longer ones, but I think the stock ones should do well. If you use similar print settings, I don't see why they shouldn't work for you.
There are mounts for two 60x25 fans. I am using Noctua (NF-A6x25FLX) with the "low noise" filter to continuously pull air from the front to the back of the unit. (Only one pictured because I needed to order another one still.) They are wired up to the extra power supply taps and I suspect with them running full time, the PSU fan on time will be lowered even more.
The holes in the front are for a switch I found on Digikey (part number: PRK22J5DBBNN by ZF Electronics.) I use the one for my lights and haven't found a use for the other hole yet, but in the mean time it will just let more air flow through.
Similar models
thingiverse
free
40mm Rubber Feet by RickyGode
...ua fans. really super quiet!
i printed these in black tpu one at a time since tpu is a bit stringy.
https://youtu.be/z1dpnnxoycu
thingiverse
free
Ender 3 V2 PSU Power supply slim cover by MarkRigo94
...ing.
i also found this design which i think is very smart and easier to print than mine:https://www.thingiverse.com/thing:4774312
thingiverse
free
Spiderman PSU cover by Jon15805
...an access the second screw.
• do not remove both screws at the same time otherwise the fan will fall off inside the power supply.
thingiverse
free
Power Supply 2020 Frame Mount Wilson II by ant0ny
... 8mm long. i tried the brackets with 2 psu's and one fitted perfect and one i had to open the holes on a few to line them up.
thingiverse
free
Ender 3 Pro MeanWell PSU fan cover/muffler by jasonramey
...cond screw. this should ensure that there is always a screw holding the fan in place and it won't fall into the power supply.
thingiverse
free
Fan Grill Covers for Ender 3v 2 Mainbord and PSU cover by Habuchi
...s to stl file
for mainbord and psu cover .https://www.thingiverse.com/thing:4644951 and https://www.thingiverse.com/thing:4612023
thingiverse
free
Vertex K8400 Fan Hole Filler & Fan Mount by jimconner
...he bolt being screwed directly into the plastic on the hole cover. if you have a thinner fan then the regular bolts should be ok.
thingiverse
free
Ender 3 V2 PSU cover (80mm Fan) by cumps
...printed the motherboard cover (https://www.thingiverse.com/thing:4653994). to make things more similar as possible, i remixed the psu cover from mpuromaki...
thingiverse
free
Ender 3 PSU Cover 80mm Fan by Norgaard87
... here or use the included step file.
just remember do upload a remix ;)
after changing the fan to a 80mm the psu is super quiet.
thingiverse
free
Dual Octopi Fan Case by brianzak419
...y pi
-4 short screws for the cover
-4 screws for the feet about 30mm
the case was designed to print upside down without supports.
Clayrev
thingiverse
free
Dewalt Miter Saw to Shop-Vac adapter by clayrev
...vac to dewalt miter saw.
3 mm thickness. small end is 1.7 inches, large is 2.3 inches.
designed with fusion 360. file included
thingiverse
free
Handle 3" on center by clayrev
... by clayrev
thingiverse
this handle is 3 inch on center holes with a diameter of 0.625 (5/8) inches. modeled for #10 24 screws.
thingiverse
free
Anycubic i3 Mega Bottom Panel Spacers by protospork
...spacers by protospork thingiverse i wanted better airflow, but clayrev#39;s thing would have taken way too much time to...
thingiverse
free
200mm BeyBlade Arena by clayrev
...200mm beyblade arena by clayrev
thingiverse
bottom could be sloped a little more, but the 6 year old seems to have fun with it.
thingiverse
free
Wii (U) Remote Holder by clayrev
...wii (u) remote holder by clayrev
thingiverse
holder for wii remotes
thingiverse
free
Tablet Mount by clayrev
...tachment and it leaves some to be desired. it does work, but i have an otterbox on my surface so the depth of the hooks is 15mm.
thingiverse
free
Dewalt Plunge Router to Shop-Vac adapter by clayrev
...he photo.
printed in the position shown in photo.
if the small end splits, you might be able to just put a hose clamp around it.
thingiverse
free
Duracell 1000 Lumans Flashlight Holder by clayrev
...ht holder by clayrev
thingiverse
wall mount holder for "duracell durabeam ultra led flashlight 1000 lumens" flashlight
thingiverse
free
T-Maxx Battery Mount by clayrev
...360 file for easier remixing. i printed mine in pla, but abs would probably be better. i'm just not set up to print in abs.
Riser
3ddd
$1
Enware Mixers
...смеситель , enware fws011 - food service pre-rinse wall riser with single control and spring return fws031 - pre...
archibase_planet
free
Riser
...riser
archibase planet
tread rise stair riser riser
stair riser - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$15
Stage 3D Model
...concert theater theatre school perform play actor acting truss riser show entertainment band ramp guitar bass drums stage 3d...
3d_export
$80
Lower marine riser package cap 3D Model
... cap ship oil rig drilling offshore platform gulf mexico petroleum
lower marine riser package cap 3d model tartino 25366 3dexport
cg_studio
$19
Lowpoly Minimalistic Buildings Pack3d model
...lowpoly minimalistic buildings pack3d model cgstudio buildings lowpoly skyscraper high-riser house architecture architectural element design minimal minimalistic silhouette shape...
archive3d
free
Riser 3D Model
...read rise stair riser riser
stair riser - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$18
Stock Cheek Pad - Adjustable butt comb
...sks 01; stock uzi; cheek pad svd4 cheek pad riser for remington,savage, ruger, winchester all models polygons - 5367...
3d_export
$15
classic column porch entrance to the house entry group
...wall lamps classic round columns with flutes steps with riser. wall pilasters. entry group portico porch street facade staircase...
3d_export
$9
classic staircase
...model is presented in 2 colors step - 290mm riser - 175mm height -...
3d_export
$9
staircase with pantry
...the open staircase on the kosoura. step - 270mm riser - 170mm width - 3650mm depth - 1780mm height...
Mega
3d_export
$20
Loud Speaker 3D Model
...loud speaker 3d model 3dexport loud speaker megaphone mega phone loud speaker 3d model ailamvnn 69693...
3d_export
$79
Sega Megadrive 3D Model
...tage old retro photorealistic toy computer people play nostalgia classic cartridge
sega megadrive 3d model fabelar 29423 3dexport
3ddd
$1
Tolomeo Mega Sospensione Ø52
...tolomeo mega sospensione Ø52
3ddd
artemide
artemide tolomeo mega sospensione Ø52
cg_studio
$79
Timberwood Logs Mega Pack3d model
... ready
.obj .dae .c4d .3ds - timberwood logs mega pack 3d model, royalty free license available, instant download after purchase.
cg_studio
$29
Cardboard Boxes Mega Pack3d model
...n
.wrl .obj .dae .c4d .fbx - cardboard boxes mega pack 3d model, royalty free license available, instant download after purchase.
3d_ocean
$25
Mega Yacht
...lygonal model, easy to animate. - poly count: 2134 - formats: max /obj /fbx/3ds/dxf - high detail was preserved with 2048&...
3d_ocean
$6
Modular Building Mega pack 2
...le format so no need to worry about if they will work with you 3d program, as i have provide them in obj , 3ds, dxf and max so...
3d_ocean
$19
Low Poly Lantern Mega Pack
... wall lanterns, hand lanterns, post lights, candles and even chandelier! all assets are low poly and share only one 512...
3d_ocean
$21
60 Web and Social Media 3D Icons
...element evernote facebook flickr forrst google icon imdb media mega network pack paypal picasa pixel reddit round sixty skype...
3d_ocean
$15
Building Mega pack
...le format so no need to worry about if they will work with you 3d program, as i have provide them in obj , 3ds, dxf and max so...
20Mm
3d_ocean
$35
PzKpfw I Ausf A "Breda" light tank
...of pzkpfw i ausf a is fitted with the 20mm “breda” automatic cannon and it was used during the...
cg_studio
$35
German 20mm MG151/20 Sprgr cartridge with cutaway3d model
...j - german 20mm mg151/20 sprgr cartridge with cutaway 3d model, royalty free license available, instant download after purchase.
3ddd
$1
Lithos Design Prisma
...design prisma w 600mm / h 600mm / d 20mm стек не...
cg_studio
$35
German 20mm MG151/20 Pzgr cartridge with cutaway3d model
...obj - german 20mm mg151/20 pzgr cartridge with cutaway 3d model, royalty free license available, instant download after purchase.
3ddd
$1
Morgana
...morgana размеры тумба: w-930mm, d-515mm, h-620mm размеры зеркало: w-890mm, d-20mm ...
3d_export
$35
German 20mm MG15120 cartridge with cutaway 3D Model
...ammunition munition granate panzer airforce luftwaffe
german 20mm mg15120 cartridge with cutaway 3d model emeral_d 21635 3dexport
3d_export
$35
German 20mm MG 15120 cartridge with cutaway 3D Model
...mmunition munition granate panzer airforce luftwaffe
german 20mm mg 15120 cartridge with cutaway 3d model emeral_d 21633 3dexport
3d_export
$10
decorative panel with ornament
...with ornament 3dexport model size: 600 x 600 x 20mm ...
3d_export
$5
medallion depicting the deity baphomet that the knights templar were accused of worshipping file
...30mm/s<br>outer shell speed : 30mm/s<br>inner shell speed: 20mm/s<br>top/bottom speed: 20mms<br>support speed: 50mm/s<br>travel speed: 150mm/s<br>skirt speed: 30mm/s<br>amount of slower layers:...
3d_export
$12
set of 73 parts bolts nuts washers nails etc
...10, 15 and 20mm)<br>- 1.5mm (5, 10, 15 and 20mm<br>bolt, hexagonal head:<br>- m3 (4, 9, 14, 19 and 24mm)<br>-...
I3
3d_ocean
$55
BMW i8
...bmw i8 3docean audi bavaria bmw car ferrari hybrid i3 i8 new rim series sport a very accurate model...
3d_ocean
$55
BMW i8 black
...i8 black 3docean audi bavaria bmw car ferrari hybrid i3 i8 new rim series sport a very accurate model...
3d_ocean
$89
BMW i3 2014
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
3d_ocean
$89
BMW i3 2012
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
3d_ocean
$29
Razer Christine
...christine 3docean 3d best blade christine computer core gamer i3 i5 i7 intel justtomas laptop model pc pro processor...
3d_ocean
$19
Razer blade 14
...blade 14 3docean blade 14 computer core gamer gt i3 i5 i7 intel justtomas laptop nvidia pro razer razer...
cg_studio
$99
BMW i3 Concept 20113d model
...i3
.3ds .c4d .fbx .lwo .max .obj - bmw i3 concept 2011 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20123d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2012 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20143d model
...
cgstudio
.3ds .c4d .fbx .lwo .max .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
cg_studio
$50
Kitchen set i33d model
...el
cgstudio
.3ds .lwo .max .obj .pz3 - kitchen set i3 3d model, royalty free license available, instant download after purchase.
Base
3d_export
$30
High Resolution Female 3D Model
...high resolution female 3d model 3dexport high resolution female base girl woman women chick tomboy busty sexy teen girly...
3d_export
$20
Bath accessories Newform Base 3D Model
...lder brush dish tissue design home liquid paper roll fixture
bath accessories newform base 3d model modelplusmodel 29553 3dexport
3d_export
$8
Toyota GTOne Base 3D Model
...s muscle car vehicle transport exotic concept prototype classic classico
toyota gtone base 3d model clutchtrigger 48326 3dexport
3d_export
$22
Trinity Anime 3D Model
...woman women chick tomboy busty sexy teen girly anatomy base child heroine trinity anime 3d model clutchtrigger 48232...
3d_export
$25
Female 3D Model
...female 3d model 3dexport female base girl woman women chick tomboy busty sexy teen girly...
3d_export
free
Download free Base Ball Bat Base BallTennis Ball 3D Model
... base balltennis ball 3d model
3dexport
base ball bat tennis
base ball bat base balltennis ball 3d model rsingh224 28710 3dexport
3d_export
$15
Female Base 3D Model
...emale girl girly heroine human low people polygon sexy teen tomboy woman women
female base 3d model clutchtrigger 53132 3dexport
3ddd
$1
Krystalia / Sharky
...the chair, the coupling between the frame and the base the structure has a polyurethane finish and legs in...
3ddd
$1
BAYERN IVORY
...18″ roman drum mocha linen shade code: white pvc base code: c/baye/iv shade code: 18rmd/lmoch cable: ivory twisted dimensions...
3ddd
$1
RH VICTORIAN HOTEL FLOOR LAMP + DESK LAMP
...3ddd restoration hardware , eichholtz victorian hotel floor lamp base on a victorian-era fixture found in a grand european...