Dual Switch Case (for 30.5x21.5mm switches) by Jaecko

Last crawled date: 3 years, 1 month ago

A case with 2 cutouts for two 30.5x21.5mm switches. I use it on my printer to switch the printer itself and an additional heat bed. The top "border" of the front side is a bit higher than the bottom one to provide some space for labels. On the bottom back side there are cutouts for 3 cables (max. 6mm). Wall thickness is 2mm, so pretty solid.
The screw holes are 2.8mm, so normal M3 screws can be screwed in without the need of nuts. The screw holes are also "inside" the case to save some space.
The depth (distance between front and back) is also large enough to contain some wire junction terminals.
It is also still small enough to be printed with a Vertex Nano K8600.