Thingiverse
Cooling Duct for Colido 2.0 by Chattel
by Thingiverse
Last crawled date: 3 years ago
The Colido 2.0 is a nice machine but it doesn't have effective cooling (not my model anyway). There is an existing fan that cools the mounting bar via a heat sink, the motor somewhat and the electronics by air exiting the heat sink leftwards but most of the air is wasted by being directed rightwards from the heat sink. None is directed near the component.
This duct replaces the heat sink. The bar and electronics are now air cooled with the majority of air directed around the nozzle. The motor is hardly cooled and I am hoping this will be okay, but after long prints it doesn't feel hot and most steppers work okay even when very hot. Anyone reading this, feel free to ask me if I've had any subsequent problems. This duct is also much lighter at 10 g than the heat sink which was 19 g.
To fit the duct, it's necessary to partially dismantle the head assembly.
Remove the electronics cover and the spring for the filament loading lever
Unplug the motor
Remove screws from the fan and take motor and heat sink away
Remove the 2 screws holding the bar to the frame from underneath
After that it should be a straightforward fit and reassemble.
NOTE: Because of the cooling effect on the nozzle, you will need to increase the nozzle temperature setting.
This duct replaces the heat sink. The bar and electronics are now air cooled with the majority of air directed around the nozzle. The motor is hardly cooled and I am hoping this will be okay, but after long prints it doesn't feel hot and most steppers work okay even when very hot. Anyone reading this, feel free to ask me if I've had any subsequent problems. This duct is also much lighter at 10 g than the heat sink which was 19 g.
To fit the duct, it's necessary to partially dismantle the head assembly.
Remove the electronics cover and the spring for the filament loading lever
Unplug the motor
Remove screws from the fan and take motor and heat sink away
Remove the 2 screws holding the bar to the frame from underneath
After that it should be a straightforward fit and reassemble.
NOTE: Because of the cooling effect on the nozzle, you will need to increase the nozzle temperature setting.
Similar models
thingiverse
free
Ormerod 1 part cooling duct by ChristofSchwiening
...t solve someone's problem!
14/6/2017 i have updated the part to a better design with more air going to the end of the nozzle.
thingiverse
free
Ord Fan Duct for J-Head by JRD
...ened to ensure good air flow to the lower nozzle.
i recommend v1.3 the most, the old version was left in case it was desirable.
thingiverse
free
Ender 3/5 Cr-10 hot end fan duct by Porkybutt
...cket cap screws. either way you might need to trim the area around the screws a bit, sheet metal isn't particularly accurate.
thingiverse
free
Fan duct for ZoneStar P802Q with J-Head hotend by Zuikkis
...tly, that's why the fan screws must be loose at this point. finally tighten the fan screws and reinstall cooling fan as well.
thingiverse
free
40mm Snap On Fan Guard for Prusa i3 MK3s - Screw Access
...i remove the fan duct for easier nozzle changes. this remix allows the screw to be removed without removing the fan guard. enjoy!
grabcad
free
3D Printable Air Duct for Centrifugal Part Cooling Fan
... dimensions of this part will most likely require modifying the sweep and loft features. printed with abs using support material.
thingiverse
free
Cooling Fan Intake for ANYCUBIC 4MaxPro
...p; parts cooling duct set
for anyycubic 4maxpro
more cool air far from heat bed for heat-sink.
more high flow for parts cooling.
thingiverse
free
Hot End Heat Sink Fan Duct for Zonestar P802Q (Prusa i3) by widddo
...hten the fan screws.
optional: you can use some super glue to fix the m3 nut on the fan duct (might facilitate the installation).
thingiverse
free
Creality Ender 6 Hot End & Part Cooling Duct by Crafted
...ses all existing fasteners and fans. fits the creality ender 6 carriage. uses existing screw holes. fits with factory hot end.
thingiverse
free
Nema 17 Cooling Fan Duct by Crashin_Machines
...e more air around the motor. it seems to work more efficiently now because i cannot feel air flowing backwards as it did before.
Chattel
thingiverse
free
DVD Rack by Chattel
...holds 10 dvd cases. fits on a bed length about 215 mm. fixes with one #6 csk screw at the top and double sided tape at the bottom
thingiverse
free
Playstation 4 controller wall mount by Chattel
...ks great! holds the controller securely and close to the wall, allows charger connection. fixed with #6 pan head screws + washers
thingiverse
free
Office chair support by Chattel
...our chair - this is set for 28.5 mm diameter shaft and 110 mm long. use 3 cable ties to secure the two halves to the chair shaft.
thingiverse
free
Nail clipper sheath by Chattel
...against the rivet underneath yet easy to remove by slightly closing the blades. no more nail clippings around the bathroom floor!
thingiverse
free
Samsung S6 case by Chattel
... jack (4) removed the support skin for volume buttons.
i printed this one in abs and vapor polished for stronger, glossy surface.
thingiverse
free
Business Card holder with pen by Chattel
... but could be scaled for european and other sizes. the pen holder is on the left but it can be mirrored for a right hand version.
thingiverse
free
Elbow Joint modification for Unlimbited Arm by Chattel
...rsunk head screw, ½” long) and a plastic component that will break if the force is too strong such as might happen during a fall.
thingiverse
free
PS4 Controller Wall Mount with Audio Jack Slot by barnacleduck
...with audio jack slot by barnacleduck thingiverse remix of chattel#39;s playstation 4 controller wall mount (https://www.thingiverse.com/thing:2247565) to add a...
thingiverse
free
Flat adapter(for use with mounting tapes) for Playstation 4 Controller Wall mount. by Glought
...can attach the ps4 controller wall mount made by chattel with mounting tapes (scotch, 3m,etc) to the wall so...
Colido
thingiverse
free
Bearing holder CoLiDo Compact by medusa1986
...bearing holder colido compact by medusa1986
thingiverse
linear bearing holder for a colido compact
thingiverse
free
ColiDo diy Printer by Schmidty
...ngiverse
colido diy printer upgrade. aluminum heat plate with 12v 200w ip65 waterproof flexible silicone heating pad heated pad.
thingiverse
free
colido d1315 fan support by ianus81
...colido d1315 fan support by ianus81
thingiverse
..
thingiverse
free
Soporte ColiDo 3.0 by Tronxyx5st
...soporte colido 3.0 by tronxyx5st
thingiverse
soporte para bobinas de filamento.
thingiverse
free
COLIDO 2.0/3.0 X3045 NOZZLE FAN
...ozzle fan
thingiverse
nozzle fan for the printer family colido 1.0 / 2.0 / 3.0 / m2020 / x3045
thiner than using a 40mmx40mm fan
thingiverse
free
CoLiDo Reel adapter by Fluffy_Monster
...as all wrong so i re drew it in solid works. can't find the original link but when i come across it again, will add the link.
thingiverse
free
Colido Printer Case by Schmidty
...colido printer case by schmidty
thingiverse
box for my 3d printer used plexiglass for the windows and only costed 45 bucks.
thingiverse
free
z axis mechanic for Colido DIY by luschengerman
... the bearings a littel bit longer than the orginal, so i have more stability and no wobbeling if the z axis is going up and down.
thingiverse
free
Sd, Micro Sd, USB, and Print scraper for Colido by TheMek27
...the printrite colido diy printer. this is really a combination of files, so don't give all credit to me. i just combined them
thingiverse
free
Colido DIY 3D Printer Calibrator by Flyboy654
...colido diy 3d printer calibrator by flyboy654
thingiverse
scale up 10 times to get the right measurements it should be 2mm thick
Duct
turbosquid
$19
Duct Set
...d
royalty free 3d model duct set for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1145038)
turbosquid
$10
Duct Tape
...id
royalty free 3d model duct tape for download as ma and ma on turbosquid: 3d models for games, architecture, videos. (1580351)
turbosquid
free
Duct Tape
...
free 3d model duct tape for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1486518)
3d_ocean
$7
Air-duct
... ventilation
high quality industrial air duct ventilation model. created in cinema 4d but comes in various other formats as well.
turbosquid
$20
Air ducts
...lty free 3d model air ducts for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1262476)
3d_export
$10
Supply air duct
...supply air duct
3dexport
supply air duct with two axial fans and hangers
turbosquid
$2
Duct Tape
...e 3d model duct tape for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1473972)
turbosquid
free
Duct Tape
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$3
Duct tape
...polys. includes: cinema 4d project. model in 3 formats (obj, fbx, 3ds). 6 .tga texture maps (albedo, ambient occlusion, diffus...
turbosquid
$40
Ventilation Duct PACK
...tion duct pack for download as ma, obj, fbx, and unitypackage on turbosquid: 3d models for games, architecture, videos. (1287068)
0
turbosquid
$12
Calligraphic Digit 0 Number 0
...hic digit 0 number 0 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389318)
3d_export
$6
set-0
...set-0
3dexport
turbosquid
$6
hedge 0
...yalty free 3d model hedge 0 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1450353)
turbosquid
$5
Nuber 0
...oyalty free 3d model nuber 0 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1564674)
turbosquid
$22
0.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Steam Locomotive Fowler 4F 0-6-0
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Liquid Number 0
... model liquid number 0 for download as c4d, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1689919)
turbosquid
$45
Dragon360_perspShape_tmp.0.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Rocks Debris 0
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$18
wood-guardrail-fence 0
...wood-guardrail-fence 0
3dexport
wood-guardrail-fence 0<br>3ds max 2015
Cooling
turbosquid
free
Cool Inc. Cool Box
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
cool penguin
...cool penguin
3dexport
cool penguin
turbosquid
$1
cooling
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$26
cooling tower
...ers.<br>model with full detail in real size. all nodes and bolted connections are built. it was designed for nuclear power.
3ddd
$1
Mantra Cool
...14 версиях и obj-файл, а также материал для включенного и для выключенного светильника. turbosmooth/meshsmooth при необходимости.
3d_export
$5
cool electric guitar
...cool electric guitar
3dexport
cool electric guitar
turbosquid
$5
Cooling glass
...quid
royalty free 3d model cooling glass for download as obj on turbosquid: 3d models for games, architecture, videos. (1193829)
turbosquid
$30
CPU Cooling
...royalty free 3d model cpu cooling for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1386263)
turbosquid
$5
Cool CLoud
...
royalty free 3d model cool cloud for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1572300)
3d_export
$5
table cooling fan
...table cooling fan
3dexport
table cooling fan made of black plastic. individual small size cooling fan for office desk.
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$29
Book variation 2 2
...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур