Card Smasher 100mm by SlappyWhite

Last crawled date: 3 years, 2 months ago

Watch a quick 3 minute video about the Card Smasher.
https://youtu.be/Bk5uveuUDG0
This will print with a .8 or .4 nozzle. Please make sure you are well calibrated as this design has reasonably tight tolerances.
It is a 100mm long card smasher designed to be used with sleeved cards to squish the air out of them or flatten them if they are curled.
You need to print the following. I recommend 60% gyro infill as the clamp will exert quite a bit of pressure (do not do 100%, solid objects actually will flex more than hollow ones). These pieces will be dense and heavy.
Print the sides on smooth glass you do not want a textured side touching your cards (talked about in video)
1x Card Smasher Side
1x Card Smasher Side (Mirrored in slicer)
2x Card Smasher Leg
1x Card Smasher Tray
As always post questions in the comments I check about once a week.