Camera Frame Mount with 360 Pi Case Cam v2 for Ender 3v2 by Sympotonic

Last crawled date: 3 years, 1 month ago

If you can use the print, please feel free to add a tip
I spent tons of hours and material to get it right in the sweet spot =) I will appreciate it.
I remixed the hell out of freshmeat_ch camera arm. I wanted a steady camera mount for my raspberry pi cam v2, there didnt move with my x gantry, or bed. Most for the purpose of Octolapse, but allso a fixed mount in the frame.
I added a new camera case with ball on top so you can angle the camera exactly as you want. I allso made the mount for right side instead of left, and extended the overhang arm for more center at the printer. I even made a hidden channel for the ribbon cable, so it was not hanging loose.
If you mount the camera arm only with the back screw, and add a small bearing ball at the front screw hole, you can move the arm to the side when not needed.
Sources:https://www.thingiverse.com/thing:4717643
All you need is included in this print. The frame mount, the actually camera arm, and the picase fitting for a RaspberryPi Cam v2.