Thingiverse
BublaVase by jaln
by Thingiverse
Last crawled date: 3 years, 1 month ago
A set of new vases for your printing pleasure.
The files are solid and must be printed in single wall vase/corkscrew mode.
I use 2 or 3 bottom layers and zero top layers.
The files are 120mm tall (<~5"). You should scale them to the size you want according to your patience level.
I used ABS at 245/110C, .28-.33mm layers using S3D, but use whatever you like.
Note that the short 4th piece in the photo is actually from the BublVase1 file, but the power went down during the print job. Not intentional, but I often recommend printing partial prints to make bowls from vases. Some look great both ways.
The files are solid and must be printed in single wall vase/corkscrew mode.
I use 2 or 3 bottom layers and zero top layers.
The files are 120mm tall (<~5"). You should scale them to the size you want according to your patience level.
I used ABS at 245/110C, .28-.33mm layers using S3D, but use whatever you like.
Note that the short 4th piece in the photo is actually from the BublVase1 file, but the power went down during the print job. Not intentional, but I often recommend printing partial prints to make bowls from vases. Some look great both ways.
Similar models
thingiverse
free
Oval gift box by Opossums
...l is used to joing wall pats together.
i have also included fusion 360 project file, so you can edit everything the way you like.
thingiverse
free
Vase 3 by AdamsLab
...ing.
use spiral vase mode, and 3 to 5 bottom layers. or you can print it using whatever settings you want, i'm not your boss.
cults
free
Oval gift box
... is used to joing wall pats together.
i have also included fusion 360 project file, so you can edit everything the way you like.
thingiverse
free
Mario Castle Vase by DAMBSSS
... use 20% infill, 0,2 layers and support angle from 60º.
i print with 2 walls, and adaptive layers.
with this set i use 66g of pla
thingiverse
free
CurvyZickZack Vase by Ledinor
... vase.
!!! i never printed the "vase zickzack.stl" on my own! but i am interested to see the results from someone else.
thingiverse
free
Vase by AdamsLab
...erse
a simple vase. scale it to your desired size.
print it using spiral vase mode, with no top layers and 3 to 5 bottom layers.
thingiverse
free
Earbud Vase Spool by SteelCityElectronics
...o be scaled to suit your earbuds.
printed using petg in vase mode with a 0.2mm layer height.
object file is available at onshape.
thingiverse
free
Spiral vase by Streetfire_Industries
...se i made, print it in vase mode on your printer.
i printed it on my drake mkiv with a 0.8 mm nozzle at a layer height of 0.35 mm
thingiverse
free
Spiral Vase by sitts314
...and set top layers to 0, but i haven't tried that method yet. comment if you have another way of making spiral vases. thanks!
thingiverse
free
Simple Drawers (Vase mode)
... file drawer_80_80_1u_s3.stl, some lines are skipped and a strange lines appears. see picture above.
other files has no problems.
Jaln
thingiverse
free
Titan Aero Extruder With Probe Mount for Lulzbot Taz 6 by jaln
...mount flexing when it does that. i actually had it loosen my hot end and heat block on the ao hex hot end before i did this mod.
thingiverse
free
E3D Filament Guide Titan and Titan Aero by jaln
...cleanup may be required to clear strings from holes.
i included all four possible versions, rh, lh, for 1.75 and 3.0 models here.
thingiverse
free
Puzzle Ball by jaln
... snaps, it's not a big deal. just make sure the faces are flush and glue together.
there is also a stand file included here.
thingiverse
free
Guitar Pickup Button Adapter V2 by jaln
... it is your responsibility!
i used esun black petg, 235 c, and 50% cooling, .25mm layers, 20% fill on an orig. prusa i3 mk3.
thingiverse
free
Lanakai TunaUke Saddle Slides by jaln
...e idea works well for intonating your ukulele, compared taking it to a luthier or cutting and filing new nuts and bridge saddles.
thingiverse
free
Wahl Clipper Guides 12 and 16 (1.5 inch/37mm and 2 inch/50mm) by jaln
...ith minimal support required.
i have also included the gcode for using petg on a prusa mk3s, in case that is what you are using.
thingiverse
free
Simplify3D Prusa i3 MK3 Bed File by jaln
...ss window or you will end up with duplicates. this is optional but recommended.
from the file menu, import the edited .fff file.
thingiverse
free
Taz 3-5 Power Supply Cover for MW SE-450-24 (or equiv.) by jaln
...ply.
the adapter mount for attaching the power supply to the side of the frame is here:https://www.thingiverse.com/thing:2741775
thingiverse
free
Taz 3-5 MW SE450-24 Power Supply Hanger by jaln
...er cords to the side of the power supply on the rear side.
i used petg, .30mm layers 30% infill. abs or pla should be fine also.
thingiverse
free
AmanteVase by jaln
...is especially useful when you are using pause to change filament colors. pausing on the inner wall will help conceal the change.