Thingiverse
![Bondtech BMG on a Taz 4 (or Taz 3-5--needs slight mod for Taz 6) by jaln](/previews/8551094.jpg)
Bondtech BMG on a Taz 4 (or Taz 3-5--needs slight mod for Taz 6) by jaln
by Thingiverse
Last crawled date: 3 years, 2 months ago
This is my Bondtech BMG with E3D V6 hotend mod for my Taz 4. I will also work on a Taz 3-5. It will work on a Taz 6 but it needs a minor mod to attach the +X limit switch. I will eventually get around to that and include the new part when i get time. You might be able to glue or drill a hole to attach the limit switch until I get around to it.
This setup is great. Accurate and reliable, especially after my removable metal bed and precision bearing upgrades.
I forgot to mention that I switched to 1.75mm filament. I don't recall if the Bondtech BMG has a 3.0mm filament model.
When printing the lower air duct I did not use support inside of the duct itself. I used some on the outside. Internal walls are designed to eliminate the need for support which would be difficult to remove. The duct on the extruder holder needs some internal support. Try to keep it to a minimum because it can be difficult to remove if you over do it.
Parts:
Standard (not mirrored) Bondtech BMG
E3d V6 hotend
A 24V blower fan (the one in the photo is actually a 12V version which runs fast. I have 24V ones on the way but the 12V works. I just keep the speed turned down some).
A 5V 30mm fan for the hotend cooling fins. The duct comes with the E3d kit. Also a short hunk of PTFE tube to connect inside the Bondtech BMG
I used a NEMA17 40mm length stepper.
The BMG and E3D I ordered from 3DMakerworld.
Note that the extruder mounting bracket has two plugs for the duct to the left of the BMG extruder. The bottom screw on the BMG needs to be tightened from the left sid of the fan duct and the two plugs then cove the hole for the 2.5mm hex wrench. The outside left plug is not problem but the inner (right) plug require some finesse. I used some fine needle nose pliers and a small flat blade screwdriver to coax it into the hole.
A few M3 x 10-12mm screws and washers.
2 M3 x18-20 screws and washers.
I used 4 brass M3 inserts (3x3x4mm O.D.) for the hotend blower fan and in the lower air duct to attach it to the extruder holder.
I also included the mount for the 12mm inductive probe which I show here, but really that should be elsewhere because it requires a metal bed to work. If you do not have a metal bed or intend to use a probe to auto level than just ignore the probe clamp.
The interface between the air duct and the extruder holder duct should be clean and carefully fitted to prevent air leaks.
You have to change your E-steps to about 455. I think that was the starting suggestion and after calibrating be extruding 100mm of filament a few times, I did not make any changes to the starting number. That cange can be made from the LCD panel Control settings. Remember to save the settings afterwards so it persists. This can also be accomplished from a command line in Simplify3D, Slic3r/Pronterface, etc.
I'll try to add some more photos later.
This setup is great. Accurate and reliable, especially after my removable metal bed and precision bearing upgrades.
I forgot to mention that I switched to 1.75mm filament. I don't recall if the Bondtech BMG has a 3.0mm filament model.
When printing the lower air duct I did not use support inside of the duct itself. I used some on the outside. Internal walls are designed to eliminate the need for support which would be difficult to remove. The duct on the extruder holder needs some internal support. Try to keep it to a minimum because it can be difficult to remove if you over do it.
Parts:
Standard (not mirrored) Bondtech BMG
E3d V6 hotend
A 24V blower fan (the one in the photo is actually a 12V version which runs fast. I have 24V ones on the way but the 12V works. I just keep the speed turned down some).
A 5V 30mm fan for the hotend cooling fins. The duct comes with the E3d kit. Also a short hunk of PTFE tube to connect inside the Bondtech BMG
I used a NEMA17 40mm length stepper.
The BMG and E3D I ordered from 3DMakerworld.
Note that the extruder mounting bracket has two plugs for the duct to the left of the BMG extruder. The bottom screw on the BMG needs to be tightened from the left sid of the fan duct and the two plugs then cove the hole for the 2.5mm hex wrench. The outside left plug is not problem but the inner (right) plug require some finesse. I used some fine needle nose pliers and a small flat blade screwdriver to coax it into the hole.
A few M3 x 10-12mm screws and washers.
2 M3 x18-20 screws and washers.
I used 4 brass M3 inserts (3x3x4mm O.D.) for the hotend blower fan and in the lower air duct to attach it to the extruder holder.
I also included the mount for the 12mm inductive probe which I show here, but really that should be elsewhere because it requires a metal bed to work. If you do not have a metal bed or intend to use a probe to auto level than just ignore the probe clamp.
The interface between the air duct and the extruder holder duct should be clean and carefully fitted to prevent air leaks.
You have to change your E-steps to about 455. I think that was the starting suggestion and after calibrating be extruding 100mm of filament a few times, I did not make any changes to the starting number. That cange can be made from the LCD panel Control settings. Remember to save the settings afterwards so it persists. This can also be accomplished from a command line in Simplify3D, Slic3r/Pronterface, etc.
I'll try to add some more photos later.
Similar models
thingiverse
free
![BMG-M and Mosquito Hotend RHD Mount by FunctionOverForm](/t/9675260.jpg)
BMG-M and Mosquito Hotend RHD Mount by FunctionOverForm
... an ezabl.
use petg/abs and .2mm layer heights, infill 40%+, 4 walls, 5 bottom/top layers, no supports. i used carbon fiber petg.
thingiverse
free
![TAZ 5 Hexagon Left Side Fan Duct by wantmys2000](/t/8938641.jpg)
TAZ 5 Hexagon Left Side Fan Duct by wantmys2000
...e glass bed corner hold down. no loss of travel.
it is designed to attach using the existing left side hotend attachment bolt.
thingiverse
free
![TAZ 5 Toolhead with Bondtech QR Universal Extruder by DreadedBunny](/t/5099271.jpg)
TAZ 5 Toolhead with Bondtech QR Universal Extruder by DreadedBunny
...uch mount, a 1 mm shim for the bltouch, and an adapter to mount a 40 mm fan to the 30 mm extruder fan shroud of an e3d v6 hotend.
grabcad
free
![BondTech BMG Parts Cooling Assembly](/t/5468549.jpg)
BondTech BMG Parts Cooling Assembly
...assembly-2016-1
bondtech in render used from: https://grabcad.com/library/cr-10-cr-10s-bondtech-bmg-e3d-v6-ezabl-mount-assembly-1
thingiverse
free
![Prusa Mk3 Fan Duct for MK3s with mosquito hotend and BMG extruder](/t/4982403.jpg)
Prusa Mk3 Fan Duct for MK3s with mosquito hotend and BMG extruder
...er. fits extruder found here: https://www.thingiverse.com/thing:3730004
allows to use sock on mosquito without touching anything.
thingiverse
free
![Bond Tech BMG Parts Cooling Fan](/t/4889476.jpg)
Bond Tech BMG Parts Cooling Fan
...mm screws: https://amzn.to/339lhfx
2mm self tapping screws: https://amzn.to/2wamwj6
mini turbo fan (24v): https://amzn.to/2c6dhsp
thingiverse
free
![FT5 Bondtech+E3D V6 Part Cooling Fan by Snipsey](/t/8256045.jpg)
FT5 Bondtech+E3D V6 Part Cooling Fan by Snipsey
...part cooling fan mount and claw designed for the ft-5 with 713maker ultralight carriage, bondtech bmg extruder and e3d v6 hotend.
thingiverse
free
![Bulldog XL / E3D-V6 cooling fan mount (60mm) by markusbart](/t/8809758.jpg)
Bulldog XL / E3D-V6 cooling fan mount (60mm) by markusbart
...ing here. the circuit switches on when the hotend gets power and switches off after it is left without power for like 10 minutes.
thingiverse
free
![Tenlog TL-D3 BMG Clone Extruders by andrewseago](/t/8371020.jpg)
Tenlog TL-D3 BMG Clone Extruders by andrewseago
...tock 40mm fan
2 stock d3 hotend assemblies
2 stock tenlog d3 vga breakout boards
1 capacitive probe (optional)
assorted 3mm bolts
thingiverse
free
![Vivedino/Formbot T-Rex 3.0 BMG Dragon Hotend Mod by Nionax](/t/8375208.jpg)
Vivedino/Formbot T-Rex 3.0 BMG Dragon Hotend Mod by Nionax
...in place.
this is still in progress and i did´t test it. but i´ll update and add more details for everthings as soon as possible.
Jaln
thingiverse
free
![Titan Aero Extruder With Probe Mount for Lulzbot Taz 6 by jaln](/t/8259834.jpg)
Titan Aero Extruder With Probe Mount for Lulzbot Taz 6 by jaln
...mount flexing when it does that. i actually had it loosen my hot end and heat block on the ao hex hot end before i did this mod.
thingiverse
free
![E3D Filament Guide Titan and Titan Aero by jaln](/t/8259868.jpg)
E3D Filament Guide Titan and Titan Aero by jaln
...cleanup may be required to clear strings from holes.
i included all four possible versions, rh, lh, for 1.75 and 3.0 models here.
thingiverse
free
![Puzzle Ball by jaln](/t/8289799.jpg)
Puzzle Ball by jaln
... snaps, it's not a big deal. just make sure the faces are flush and glue together.
there is also a stand file included here.
thingiverse
free
![Guitar Pickup Button Adapter V2 by jaln](/t/8303679.jpg)
Guitar Pickup Button Adapter V2 by jaln
... it is your responsibility!
i used esun black petg, 235 c, and 50% cooling, .25mm layers, 20% fill on an orig. prusa i3 mk3.
thingiverse
free
![Lanakai TunaUke Saddle Slides by jaln](/t/8352638.jpg)
Lanakai TunaUke Saddle Slides by jaln
...e idea works well for intonating your ukulele, compared taking it to a luthier or cutting and filing new nuts and bridge saddles.
thingiverse
free
![Wahl Clipper Guides 12 and 16 (1.5 inch/37mm and 2 inch/50mm) by jaln](/t/8352671.jpg)
Wahl Clipper Guides 12 and 16 (1.5 inch/37mm and 2 inch/50mm) by jaln
...ith minimal support required.
i have also included the gcode for using petg on a prusa mk3s, in case that is what you are using.
thingiverse
free
![Simplify3D Prusa i3 MK3 Bed File by jaln](/t/8600624.jpg)
Simplify3D Prusa i3 MK3 Bed File by jaln
...ss window or you will end up with duplicates. this is optional but recommended.
from the file menu, import the edited .fff file.
thingiverse
free
![Taz 3-5 Power Supply Cover for MW SE-450-24 (or equiv.) by jaln](/t/8601139.jpg)
Taz 3-5 Power Supply Cover for MW SE-450-24 (or equiv.) by jaln
...ply.
the adapter mount for attaching the power supply to the side of the frame is here:https://www.thingiverse.com/thing:2741775
thingiverse
free
![Taz 3-5 MW SE450-24 Power Supply Hanger by jaln](/t/8604808.jpg)
Taz 3-5 MW SE450-24 Power Supply Hanger by jaln
...er cords to the side of the power supply on the rear side.
i used petg, .30mm layers 30% infill. abs or pla should be fine also.
thingiverse
free
![AmanteVase by jaln](/t/8604821.jpg)
AmanteVase by jaln
...is especially useful when you are using pause to change filament colors. pausing on the inner wall will help conceal the change.
Bondtech
thingiverse
free
![Bondtech Gear Clock Holder by iamgnat](/t/8149016.jpg)
Bondtech Gear Clock Holder by iamgnat
...duced depth of the motor and placement of the part fan mount. so here is a remix of the holder part to fit the bondtech extruder.
thingiverse
free
![Bondtech BMG 50mm fan by AzzzTech](/t/8149579.jpg)
Bondtech BMG 50mm fan by AzzzTech
...ndtech bmg front cover by dissed to mount a 50mm part cooling fan.. original files here https://www.thingiverse.com/thing:3510052
thingiverse
free
![CR-10S-Bondtech-Mosquito_Mount_Bl_Touch by enoblk](/t/8150225.jpg)
CR-10S-Bondtech-Mosquito_Mount_Bl_Touch by enoblk
...cr-10s-bondtech-mosquito_mount_bl_touch by enoblk
thingiverse
cr-10s-bondtech-mosquitomount-_bl_touch
thingiverse
free
![Ender3 BMG V6 compact FAN duct assembly by jslovak](/t/8144727.jpg)
Ender3 BMG V6 compact FAN duct assembly by jslovak
...duct and can not find any. its designed for bondtech bmg dual gear extruder, pancake stepper and e3d v6...
thingiverse
free
![Ender 5 Direct Drive mount remix for BMG extruder by blast_arr](/t/8145105.jpg)
Ender 5 Direct Drive mount remix for BMG extruder by blast_arr
...design did not allow for the instalation of a bondtech bmg dual geared extruder. this part should clear enough...
thingiverse
free
![Tronxy Zonestar P802M Multi-Axis Overhaul Pack Bear Exxa 1.0 MK3S Optional Bowden Upcycled Extruder by JBieri](/t/8146497.jpg)
Tronxy Zonestar P802M Multi-Axis Overhaul Pack Bear Exxa 1.0 MK3S Optional Bowden Upcycled Extruder by JBieri
...extruder options including: bear 1.0 direct drive extruder using bondtech gears, a bear bowden extruder (using a special lid),...
thingiverse
free
![Rat Rig V-Cast (Linear Rail based IDEX Cartesian DIY 3D Printer) by ratrigprinters](/t/8147038.jpg)
Rat Rig V-Cast (Linear Rail based IDEX Cartesian DIY 3D Printer) by ratrigprinters
...options: bowden, e3d titan, e3d titan aero, e3d hemera, bondtech bmg and possibly even more options in the future...
thingiverse
free
![PitStop Extruder Body PTFE Mod by Loogyg](/t/8126861.jpg)
PitStop Extruder Body PTFE Mod by Loogyg
...come all the way down to just above the bondtech gears. be advised that the ptfe tube does interfere...
thingiverse
free
![Ender / CR-10 Direct Drive Cable Chain Mounts by max_davis](/t/8134072.jpg)
Ender / CR-10 Direct Drive Cable Chain Mounts by max_davis
...max_davis thingiverse cable chain mounts for x endstop and bondtech direct drive for creality (cr-10 / ender) printers uses...
thingiverse
free
![Anycubic Kossel Linear Plus flex3drive flexible bowden remote motor Effector upgrade E3D V6 (Volcano too) and 5015 blower by rosch8](/t/8136747.jpg)
Anycubic Kossel Linear Plus flex3drive flexible bowden remote motor Effector upgrade E3D V6 (Volcano too) and 5015 blower by rosch8
...and for sure bondtech double drive gear kit 1,75/5 mmhttps://www.bondtechse/en/product/drivegear-kits/ extruder motor i use the ofiginal stock. with stock...
Taz
3d_ocean
$19
![TAZ RIGGED](/t/560924.jpg)
TAZ RIGGED
...ax version only texture is used only for wb logo, taz dont need texture no special render engine needed, just unzip and render...
3d_export
$12
![Bowl Decorated 3D Model](/t/855474.jpg)
Bowl Decorated 3D Model
...bowl decorated 3d model 3dexport bowl tazn elements ceramics kitchen plastic cup container decorative cake biscuits...
cg_studio
$15
![Taz Rigged3d model](/t/677629.jpg)
Taz Rigged3d model
...ged3d model
cgstudio
.3ds .fbx .max .obj - taz rigged 3d model, royalty free license available, instant download after purchase.
cg_studio
$10
![Taz 3D3d model](/t/680313.jpg)
Taz 3D3d model
...taz 3d3d model
cgstudio
.3ds .max - taz 3d 3d model, royalty free license available, instant download after purchase.
3ddd
$1
![Crate & Barrel Serveware](/t/921450.jpg)
Crate & Barrel Serveware
...crate & barrel поднос -http://www.crateandbarrel.com/feast-platter/s186961 набор ножей для сыра -http://www.crateandbarrel.com/tazcheese-knife-3-piece-set/s681377 бокал...
3d_export
$10
![Taz Toy Calendar 3D Model](/t/135263.jpg)
Taz Toy Calendar 3D Model
... 3d model
3dexport
taz toy calendar day month year looney tunes cartoon kid child
taz toy calendar 3d model nkfrds 49687 3dexport
3d_export
$19
![Thylacine 3D Model](/t/135655.jpg)
Thylacine 3D Model
...animalia chordata mammalia marsupial dog extinct animals tiger tassie taz thylacine 3d model poly3dmodels 90790...
3d_export
$5
![Taz character 3D Model](/t/130439.jpg)
Taz character 3D Model
...taz character 3d model
3dexport
taz toon character cartoon
taz character 3d model supercigale 22095 3dexport
3d_export
$10
![Taz Tasmanian Devil RIGGED 3D Model](/t/130779.jpg)
Taz Tasmanian Devil RIGGED 3D Model
...y tunes anime bunny rigged material fantasy creature diable dessin
taz tasmanian devil rigged 3d model supercigale 28390 3dexport
thingiverse
free
![Taz6 Openbuilds Bed Plate for Laser Cutting by kamv](/t/8143631.jpg)
Taz6 Openbuilds Bed Plate for Laser Cutting by kamv
...don't have an original or don't want to modify it.
thanks to tim pierce (piercet) for helping me through the mod process!
Bmg
cg_studio
$25
![.50 BMG Cartridge3d model](/t/630908.jpg)
.50 BMG Cartridge3d model
...odel
cgstudio
.3ds .max .obj .wrl - .50 bmg cartridge 3d model, royalty free license available, instant download after purchase.
3ddd
$1
![пулемёт системы Браунинг М2](/t/660743.jpg)
пулемёт системы Браунинг М2
...1653 мм длина ствола, мм: 1143 мм патрон: .50 bmg или 12,7x99 мм калибр, мм: 12,7 мм скорострельность, выстрелов/мин:...
3d_export
$105
![Browning M2 3D Model](/t/121966.jpg)
Browning M2 3D Model
...m2 3d model 3dexport infantry browning m2 50 caliber bmg army machine gun firearm tripod browning m2 3d model...
3d_export
$79
![Sniper rifle Barret M95 3D Model](/t/130647.jpg)
Sniper rifle Barret M95 3D Model
...rifles heavy barrett m95 mod 95 large caliber 50 bmg army soldier ranger military power bors optical sight sniper...
3d_export
$105
![Browning M2 3D Model](/t/140233.jpg)
Browning M2 3D Model
...m2 3d model 3dexport infantry browning m2 50 caliber bmg army machine gun firearm tripod browning m2 3d model...
3d_export
$22
![.50 BMG Cartridge 3D Model](/t/138697.jpg)
.50 BMG Cartridge 3D Model
...ectile rifle round pistol cartridge m2 hb 127x99mm nato browning barrett m82a1
.50 bmg cartridge 3d model plutonius 8091 3dexport
3d_export
$5
![50 caliber BMG round 3D Model](/t/50097.jpg)
50 caliber BMG round 3D Model
...d 3d model
3dexport
50cal caliber 50 round bullet bmg cartridge browning rifle
50 caliber bmg round 3d model csw92 27660 3dexport
3d_export
$8
![cartrige m50 bmg](/t/12687952.jpg)
cartrige m50 bmg
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
turbosquid
$25
![50 BMG Cartridge](/t/13454209.jpg)
50 BMG Cartridge
...e 3d model 50 bmg cartridge for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1303035)
turbosquid
$2
![.50 BMG](/t/13253635.jpg)
.50 BMG
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Slight
3ddd
$1
![Miniforms Acco Table](/t/865765.jpg)
Miniforms Acco Table
...canaletto walnut. the solid slats are characterized by a slight twist that makes the base surprisingly strong and...
3ddd
$1
![RH MODERN DESMOND BEDROOM SET](/t/998165.jpg)
RH MODERN DESMOND BEDROOM SET
...and no two are alike. given their handwoven nature, slight variations in shading and size are inherent to the...
3ddd
$1
![FBC London - Roman](/t/991363.jpg)
FBC London - Roman
...two versions available of the roman side tables with slight variations within the design. these are hand carved in...
3ddd
$1
![Axo Light SLIGHT](/t/977269.jpg)
Axo Light SLIGHT
...axo light slight
3ddd
axo light
axo light slight
d=100(26)cm
3ddd
$1
![Axo Light Slight](/t/598853.jpg)
Axo Light Slight
...axo light slight
3ddd
axo light
в архиве 2 светильника с абажурами из ткани красного и ванильного цвета.
3ddd
$1
![Bicycle from Creme Cycles](/t/603402.jpg)
Bicycle from Creme Cycles
...creme cycles. based on a vinyl 5050 model with slight changes in the appearance. the 3d model is complex,...
3ddd
$1
![Lau and Globus set by STUA](/t/600742.jpg)
Lau and Globus set by STUA
...singularity of this design comes from its details: a slight inclination of the legs with a smooth & curved...
3d_ocean
$5
![Grass Frost Close Seamless Texture](/t/565898.jpg)
Grass Frost Close Seamless Texture
...green ground ice icy leaf leaves nature snow winter slight covering of frost on grass, seamless texture. perfect for...
3d_ocean
$3
![Ice material 3 pack](/t/579314.jpg)
Ice material 3 pack
...materials made inside of cinema 4d all 3 have slight differences which really help to make a realistic ice...
3d_ocean
$25
![HDRI spherical sky panorama -0836- misty morning](/t/564050.jpg)
HDRI spherical sky panorama -0836- misty morning
...of a sunny morning sky (time: 08:36) with a slight mist on the horizon. ideal for nice and early...
Mod
3d_export
$25
![Building 76 3D Model](/t/283313.jpg)
Building 76 3D Model
...re commercial shop street apartment lowpoly low poly game ready mod village downtown
building 76 3d model vkmodels 72910 3dexport
3d_export
$25
![3D Models Building 78 3D Model](/t/283315.jpg)
3D Models Building 78 3D Model
...ial shop street apartment lowpoly low poly game ready mod village downtown
3d models building 78 3d model vkmodels 73278 3dexport
3ddd
$1
![Lumi mod. 1732](/t/863818.jpg)
Lumi mod. 1732
...lumi mod. 1732
3ddd
lumi
люстра lumimod. 1732диаметр: 85 смвысота: 80 см
3ddd
$1
![Lumi mod. 1733](/t/864596.jpg)
Lumi mod. 1733
...lumi mod. 1733
3ddd
lumi
люстра lumimod. 1733диаметр: 90 смвысота: 120 см
3d_ocean
$19
![VW Rims Golf](/t/861768.jpg)
VW Rims Golf
...3dsmax accuracy auto automotive car detail high mesh mod modl part poly rim rims sport transport tune tuning vehicle...
3d_ocean
$18
![Chrysler 300C Platinum 2015 rim](/t/861825.jpg)
Chrysler 300C Platinum 2015 rim
...correctly named. so it is easy to use and mod.. ...
3d_ocean
$18
![Chevrolet Suburban LZ1 2008 rim](/t/861834.jpg)
Chevrolet Suburban LZ1 2008 rim
...correctly named. so it is easy to use and mod.. ...
3d_ocean
$25
![Nissan Cabstar wheel](/t/862070.jpg)
Nissan Cabstar wheel
...so it is easy to use and modify the mod.. ...
3d_ocean
$19
![Cessna Citation Latitude private jet](/t/862277.jpg)
Cessna Citation Latitude private jet
...internal render software.renderings created with subd 2,until my 3d mod.. ...
3d_ocean
$25
![Honda NSX wheel 2015](/t/860319.jpg)
Honda NSX wheel 2015
...so it is easy to use and modify the mod.. ...
6
3d_export
$199
![Stadium Level 6 Day 3D Model](/t/289425.jpg)
Stadium Level 6 Day 3D Model
...ty architecture element block gameready unity lowpoly football upgrade people
stadium level 6 day 3d model fabelar 90971 3dexport
3d_export
$8
![Iphone 6 case Batman 3D Model](/t/284776.jpg)
Iphone 6 case Batman 3D Model
... model
3dexport
iphone iphone6 case batman smarthphone gadgets phone cases
iphone 6 case batman 3d model ffranco95 88201 3dexport
3d_export
$100
![3D Model Detailed House Cutaway 6 3D Model](/t/290706.jpg)
3D Model Detailed House Cutaway 6 3D Model
...living room kitchen aerial view flat apartment house home bedroom
3d model detailed house cutaway 6 3d model acdcz 64471 3dexport
3d_export
$30
![Highly detailed singlefamily house 6 3D Model](/t/296345.jpg)
Highly detailed singlefamily house 6 3D Model
...n single family house building residential town city garage
highly detailed singlefamily house 6 3d model labmatic 21523 3dexport
3d_export
$99
![Mazda 6 sedan 2013 3D Model](/t/297197.jpg)
Mazda 6 sedan 2013 3D Model
...zda6 2013 2014 2015 2016 4-door sedan saloon japan japanese third generation
mazda 6 sedan 2013 3d model humster3d 64386 3dexport
3ddd
$1
![Carl Hansen & Son CH20](/t/864087.jpg)
Carl Hansen & Son CH20
...сиденья): 1)бук 2)вишня 3)дуб светлый 4)дуб темный 5)белый окрашенный 6кожа черная 7)кожа коричневая 8)ткань черная 9)ткань в полоску 10)ткань...
3ddd
$1
![Josephine Queen 6 Chandelier](/t/864129.jpg)
Josephine Queen 6 Chandelier
...радиционный фарфор с применением золота, платины, черные и белые концы с не пористого керамического материала. креативный дизайн.
3ddd
$1
![Eichholtz 6 arm chandelier (LIG04361)](/t/864196.jpg)
Eichholtz 6 arm chandelier (LIG04361)
... chandelier (lig04361)
3ddd
chandelier , eichholtz
eichholtz 6 arm chandelier (lig04361)
3ddd
$1
![Arizzi 445/6](/t/864278.jpg)
Arizzi 445/6
...arizzi 445/6
3ddd
arizzi
люстра arizzi 445/6
3ddd
$1
![Luce da Vivere](/t/864378.jpg)
Luce da Vivere
...vivere 3ddd luce da vivere luce da vivere mary 387/63 ...
5
3d_export
$99
![Vauxhall Agila 2008 3D Model](/t/290438.jpg)
Vauxhall Agila 2008 3D Model
...europe suzuki wagon r+ compact chevrolet mw city urban 5door hatchback splash vauxhall agila 2008 3d model humster3d 46740...
3d_export
$99
![Toyota Yaris 2012 5door 3D Model](/t/290516.jpg)
Toyota Yaris 2012 5door 3D Model
...2012 5-door 5d 3d 3-door 2013 2014 2015 2016 hatchback japan small city car
toyota yaris 2012 5door 3d model squir 47702 3dexport
3d_export
$99
![Volkswagen Golf VII R 5door 2015 3D Model](/t/288837.jpg)
Volkswagen Golf VII R 5door 2015 3D Model
...or volkswagen vw detailed interior golf vii 2017 hothatch 5door 5d
volkswagen golf vii r 5door 2015 3d model squir 90150 3dexport
3d_export
$99
![Fiat Uno Attractive hatchback 5door 2013 3D Model](/t/296961.jpg)
Fiat Uno Attractive hatchback 5door 2013 3D Model
...013 2014 5-door hatchback compact italy italian brazil
fiat uno attractive hatchback 5door 2013 3d model humster3d 69192 3dexport
3d_export
$99
![Vauxhall Insignia hatchback 2012 3D Model](/t/297232.jpg)
Vauxhall Insignia hatchback 2012 3D Model
...australia uk vauxhall insignia hatchback 2012 3d model humster3d 6595 ...
3d_export
$99
![Citroen C4 Aircross 2013 3D Model](/t/292727.jpg)
Citroen C4 Aircross 2013 3D Model
...peugeot 4008 citroen c4 aircross 2013 3d model humster3d 5075 ...
3ddd
$1
![Ковры классические Isfahan](/t/863798.jpg)
Ковры классические Isfahan
...ковры классические isfahan 3ddd ковер коллекция из 5 ковров isfahan, размеры 1400 х...
3ddd
$1
![ferm_LIVING_baskets](/t/863828.jpg)
ferm_LIVING_baskets
...создаете себе красивый столик. в дополнение к столику идет декор.http://www.fermliving.com/webshop/shop/wire-baskets.aspx http://www.fermliving.com/webshop/shop/wire-baskets/wire-basket-top-3.aspx http://www.fermliving.com/webshop/shop/all-products/winebottle-candleholder-5aspx http://www.fermliving.com/webshop/shop/geometry-vase-1.aspx в архиве max...
3ddd
$1
![Люстра Arte Lamp Cage A4320LM-5CC](/t/863880.jpg)
Люстра Arte Lamp Cage A4320LM-5CC
...тикул: a4320lm-5cc
характеристики:
количество ламп 5 шт, тип ламп е14
диаметр: 680 мм.
высота: 450 мм.
высота с цепочкой: 900 мм.
3ddd
$1
![Ralph Lauren WHITEHALL LARGE SCONCE IN BUTLER'S SILVER](/t/863934.jpg)
Ralph Lauren WHITEHALL LARGE SCONCE IN BUTLER'S SILVER
...настенный (бра) rl2001bs dimensions: height: 17" width: 9¾" extension: 5" ...
4
3d_export
$99
![MercedesBenz EClass sedan W210 1996 3D Model](/t/284178.jpg)
MercedesBenz EClass sedan W210 1996 3D Model
...w210 1996 1997 1998 1999 2000 2001 2002 2003 4door sedan saloon luxury germany mercedesbenz eclass sedan w210 1996...
3d_export
$89
![Lamborghini Aventador LP 700 4 US spec 3D Model](/t/288758.jpg)
Lamborghini Aventador LP 700 4 US spec 3D Model
... avto car vehicle auto automobile cars 3d model high poly
lamborghini aventador lp 700 4 us spec 3d model creatord 82681 3dexport
3d_export
$99
![Iveco Trakker Log Truck 4axis 2012 3D Model](/t/283466.jpg)
Iveco Trakker Log Truck 4axis 2012 3D Model
...-axis 2011 2012 2013 2014 truck heavy duty trucks industrial
iveco trakker log truck 4axis 2012 3d model humster3d 59446 3dexport
3d_export
$30
![Samsung Galaxy Note 4 Charcoal Black 3D Model](/t/280936.jpg)
Samsung Galaxy Note 4 Charcoal Black 3D Model
...four phone flagship iphone apple quality blender cycles
samsung galaxy note 4 charcoal black 3d model dragosburian 96596 3dexport
3d_export
$99
![Dodge Nitro 2011 3D Model](/t/296400.jpg)
Dodge Nitro 2011 3D Model
...jeep liberty family dodge nitro 2011 3d model humster3d 4048 ...
3d_export
$99
![Kia Forte Cerato Naza Sedan 2011 3D Model](/t/296434.jpg)
Kia Forte Cerato Naza Sedan 2011 3D Model
...kia forte cerato naza sedan 2011 3d model humster3d 4220 ...
3d_export
$15
![Slums Building 4 3D Model](/t/297029.jpg)
Slums Building 4 3D Model
... house metal sheets deteriorated makeshift grunge shack shanty town udk
slums building 4 3d model aetherealstudios 81939 3dexport
3d_export
$99
![Mazda 6 sedan 2013 3D Model](/t/297197.jpg)
Mazda 6 sedan 2013 3D Model
...third generation mazda 6 sedan 2013 3d model humster3d 6486 ...
3d_export
$99
![Mazda 323 Familia 1994 3D Model](/t/297269.jpg)
Mazda 323 Familia 1994 3D Model
...allegro artis protege etude 1994 1995 1996 1997 1998 4-door sedan saloon
mazda 323 familia 1994 3d model humster3d 78115 3dexport
3d_export
$175
![3D Models Building collection 4 3D Model](/t/292412.jpg)
3D Models Building collection 4 3D Model
...office apartment balcony store town architecture game ready city
3d models building collection 4 3d model vkmodels 68692 3dexport
Needs
3d_ocean
$9
![chess](/t/861701.jpg)
chess
...and textures are included in file. included in the zip file: 3ds max,obj, mat library and textures. if you need any other form...
3d_ocean
$5
![Rope Barrier](/t/861702.jpg)
Rope Barrier
... rope rope barrier stanchions vip
vray gold material added vray velvet material added files: .3ds .c4d .obj note: you need vray
3d_ocean
$12
![Computer mouse](/t/861734.jpg)
Computer mouse
...odel. uw texture added. if need low poly, you can turn off smooth modifier. created in 3dsmax 2016 and there is 3dsmax 2014 copy.
3d_ocean
$6
![Hyperrealistic 4k Jupiter](/t/861817.jpg)
Hyperrealistic 4k Jupiter
...s model was done in blender render so no plugins needed, it is ready to be rendered straight away. all hd high res-maps which ...
3d_ocean
$6
![Cabinet](/t/861872.jpg)
Cabinet
... poly modeling and no need any additional modeling and texturing. - only one model included - hi-poly model with turbomooth mo...
3d_ocean
$7
![Tachometer](/t/861874.jpg)
Tachometer
... race car tachometer
simple tachometer without textures (no need of textures) can be used in your car models or in other projects
3d_ocean
$29
![Cartoon Skeleton Rigged](/t/862059.jpg)
Cartoon Skeleton Rigged
... only: the model is rigged ( pelvis,head,legs,arms,hands,spine,head,foot,mouth,fingers). no special render engine needed, just...
3d_ocean
$5
![Head Base With Uv](/t/862085.jpg)
Head Base With Uv
...new head base mesh is perfect for your production needs with...
3d_ocean
$16
![3D Baby](/t/862150.jpg)
3D Baby
... also teeth & toung. it has basic rigging. it will easy to move as animation. it can be use in game. if you need help plea...
3d_ocean
$16
![Mermaid](/t/862163.jpg)
Mermaid
...olygons. made entirely in 3ds max 2015. it’s completely editable which means you can tweak whatever you need – if needed. not ...
3
3d_export
$99
![MercedesBenz Axor Tractor Truck 2011 3D Model](/t/290320.jpg)
MercedesBenz Axor Tractor Truck 2011 3D Model
...012 2013 2014 2015 2016 truck heavy duty trucks industrial
mercedesbenz axor tractor truck 2011 3d model humster3d 93185 3dexport
3d_export
$99
![Toyota Yaris 2012 5door 3D Model](/t/290516.jpg)
Toyota Yaris 2012 5door 3D Model
...2012 5-door 5d 3d 3-door 2013 2014 2015 2016 hatchback japan small city car
toyota yaris 2012 5door 3d model squir 47702 3dexport
3d_export
$7
![Pendant Lamp 3 3D Model](/t/288836.jpg)
Pendant Lamp 3 3D Model
...pendant lamp 3 3d model
3dexport
pendant lights lighting bulb ceiling lamp
pendant lamp 3 3d model bessoo 87379 3dexport
3d_export
$99
![Kia Pro Ceed 3door hatchback 2011 3D Model](/t/283429.jpg)
Kia Pro Ceed 3door hatchback 2011 3D Model
...y hatchback hatch estate europe hyundai i30 south korea forte
kia pro ceed 3door hatchback 2011 3d model humster3d 50040 3dexport
3d_export
$30
![3 bedroom maisonette plus swimming pool 3D Model](/t/283471.jpg)
3 bedroom maisonette plus swimming pool 3D Model
...s swimming pool 3d model
3dexport
house swimming building
3 bedroom maisonette plus swimming pool 3d model camarra 59238 3dexport
3d_export
$25
![Keyboard Workstation 3 3D Model](/t/296668.jpg)
Keyboard Workstation 3 3D Model
...etailed music instrument sound studio keyboard workstation key chrome metal
keyboard workstation 3 3d model cgaxis 70062 3dexport
3d_export
$24
![Photorealistic Low Poly Building 3 3D Model](/t/297199.jpg)
Photorealistic Low Poly Building 3 3D Model
...hitecture urban residential suburb europe city cityscape vray
photorealistic low poly building 3 3d model vkmodels 64244 3dexport
3d_export
$99
![Kia Pro Ceed 2014 3D Model](/t/297236.jpg)
Kia Pro Ceed 2014 3D Model
...rt
kia pro ceed 2014 2015 2016 2013 3-door hatchback compact city south korea
kia pro ceed 2014 3d model humster3d 64388 3dexport
3d_export
$60
![RKG 3 Grenade 3D Model](/t/292665.jpg)
RKG 3 Grenade 3D Model
...mb gun weapon explosives army marine explosion hand handgrenade russia soviet iraq
rkg 3 grenade 3d model blacks3d 52716 3dexport
3ddd
$1
![ferm_LIVING_baskets](/t/863828.jpg)
ferm_LIVING_baskets
...создаете себе красивый столик. в дополнение к столику идет декор.http://www.fermliving.com/webshop/shop/wire-baskets.aspx http://www.fermliving.com/webshop/shop/wire-baskets/wire-basket-top-3aspx http://www.fermliving.com/webshop/shop/all-products/winebottle-candleholder-5.aspx http://www.fermliving.com/webshop/shop/geometry-vase-1.aspx в архиве max...