BLX185 ESC Mount for Arrma 3s Typhon by resu13

Last crawled date: 3 years, 4 months ago

Description
These adapter plates allow you to mount the BLX185 ESC onto the ARRMA 3s Typhon without the requirement to lift the body (with e.g. the Kraton body mount parts) when using the BLX185 mount for 3s vehicles you can find on thingiverse as well.
The adapter plates and the BLX185 ESC are mounted between the motor and the stock receiver box. The power switch can be placed on the stock receiver box.
Please note that the motor size is then limited to 680mm.
Model files
SubPlate.stl – Being mounted at the bottom onto the existing holes in the chassis.
TopPlate.stl – Being mounted on top of the sub-plate where you finally can mount the BLX185 ESX.
Installation instructions
Based on the first image, the sub plate must be mounted onto the existing screw holes of the chassis between the motor mount and the receiver box using two M3x8 screws.
Then the top plate must be mounted onto the sub plate using two M3x10 screws.
Finally the ESC must be mounted onto the top plate using two M3x8 screws.
The ESC power switch can simply be mounted on its default position on top of the receiver box
Required parts
4x M3x8 screws
2x M3x10 screws