Thingiverse
Arrma Granite Spoiler by PolymerToad
by Thingiverse
Last crawled date: 2 years, 10 months ago
This is a spoiler that mounts to Arrma Granite bodies without any modification. It was designed for an Arrma Granite Voltage, but will work for other Granite bodies. You will have to remove the rear body clip retainers because the design uses the holes to mount the spoiler. The Arrma Granite Voltage does not have the retainers, but does have the holes.
There are two support plates and a spoiler. All parts get stacked and through bolted with two M4x20 bolts and nyloc nuts, in order from top to bottom. Spoiler, upper plate, body, and lower plate.
There are two support plates and a spoiler. All parts get stacked and through bolted with two M4x20 bolts and nyloc nuts, in order from top to bottom. Spoiler, upper plate, body, and lower plate.
Similar models
thingiverse
free
Arrma Voltage ESC, Cooling Fan and Receiver Box Bracket by PolymerToad
...rrma granite voltage. super glue the antenna bushing into the lid from the bottom after printing. lid is held on by 2 body clips.
grabcad
free
Body Shell for Traxxas Rustler 4x4 VXL
...plate. use 100% infill. the wing mount is for an arrma kraton 4s wing. two m5 bolts go through the holes for increased stiffness.
thingiverse
free
Arrma Voltage ESC mounting Plate by PolymerToad
...me puts your screws into the battery compartment. i made this plate for the purpose of relocating or mounting an aftermarket esc.
grabcad
free
Buggy Body for Traxxas Rustler 4x4 VXL
...h the holes for increased stiffness.
the red body pictured was a first attempt the blue body has added cooling ducts and vents.
thingiverse
free
Arrma body clip retainer by Afterhender
...arrma body clip retainer by afterhender
thingiverse
clip pour maintien carrosserie arrma.
thingiverse
free
Arrma blx 185 mount plate by Matthijs4133
...arrma blx 185 mount plate by matthijs4133
thingiverse
arrma blx 185 mount plate
thingiverse
free
Arrma Granite 3S BLX v2 front body mount by caracalrc
...this car in stock configuration. this is design to obtain the exact same body position, no tuning, just a print and replace part.
thingiverse
free
Arrma Granite roof protection by Afterhender
...granite roof protection by afterhender
thingiverse
arrma granite roof protection based on bigrock designed found on thingiverse.
thingiverse
free
Arrma Granite 3S BLX v2 TPU Wing Mount by caracalrc
...of the wing mount), that's why the two parts are not stuck well. it works anyway. your print should be much better than mine.
thingiverse
free
Arrma Kraton Rear Skid Plate by colster03
...e any of them. tell me if it needs improvement! be warned! i have been told it does not work with the newest model of the kraton.
Polymertoad
thingiverse
free
PXtoys Speed Pioneer spoiler by PolymerToad
...rtoad
thingiverse
remixed from thing #1165090. all i did was shrink it down and made the holes to fit on a pxtoys speed pioneer.
thingiverse
free
Arrma Voltage ESC and Cooling Fan Plate by PolymerToad
...0mm fan. this is the fan i used https://www.amazon.com/gp/product/b08lyz343s/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=utf8&psc=1
thingiverse
free
Arrma Voltage ESC and Cooling Fan Bracket by PolymerToad
...m fan.
this is the fan i used. https://www.amazon.com/gp/product/b08lyz343s/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=utf8&psc=1
thingiverse
free
Pxtoys 1/18 Speed Pioneer RC Car Rear Bumper by PolymerToad
...
thingiverse
this a rear bumper for a 1/18 scale pxtoys speed pioneer. probably fits other models, but hasn't been verified.
thingiverse
free
Arrma Voltage ESC mounting Plate by PolymerToad
...me puts your screws into the battery compartment. i made this plate for the purpose of relocating or mounting an aftermarket esc.
thingiverse
free
Pxtoys 1/18 Speed Pioneer RC car front body support by PolymerToad
...t by polymertoad
thingiverse
front body support for 1/18 pxtoys rc cars. i made this for my speed pioneer, may fit other models.
thingiverse
free
Arrma Voltage ESC, Cooling Fan and Receiver Box Bracket by PolymerToad
...rrma granite voltage. super glue the antenna bushing into the lid from the bottom after printing. lid is held on by 2 body clips.
thingiverse
free
New Bright Grave Digger Steering link by PolymerToad
...o i could heat up a safety pin with a torch, push it into the hole and then trim it flush. time will tell if it lasts any longer.
thingiverse
free
Pxtoys 1/18 Speed Pioneer RC car front body support v2 by PolymerToad
... a little stronger than the previous version. i made the adjustment holes so that they don't go all the way through the post.
Arrma
thingiverse
free
Arrma Outcast grill (calandre Arrma) by somethingsbyj
...arrma outcast grill (calandre arrma) by somethingsbyj
thingiverse
this is arrma oucast 6s grill with 22mm light
thingiverse
free
ARRMA Mudguards by Bodsgo
...arrma mudguards by bodsgo
thingiverse
mudguards für arrma kraton
thingiverse
free
Arrma Bodywashers by Basuu
...arrma bodywashers by basuu
thingiverse
washers to protect your arrma-body
thingiverse
free
Arrma Typhon V4 cover set DIFF Other ARRMA models possible.
...ma typhon v4 cover set diff other arrma models possible.
thingiverse
arrma typhon v4 cover set diff
other arrma models possible.
thingiverse
free
ARRMA raider headlight by Nys1
...arrma raider headlight by nys1
thingiverse
arrma raider headlight...
thingiverse
free
ARRMA raider roof by Nys1
...arrma raider roof by nys1
thingiverse
arrma raider roof
thingiverse
free
Arrma Mudguards by Basuu
...arrma mudguards by basuu
thingiverse
arrma mudguards for kraton, talion & outcast/notorious 6s from 23 mp
thingiverse
free
Arrma louvers for the Infraction by Rowster
...arrma louvers for the infraction by rowster
thingiverse
arrma infraction front wheel louvers.
thingiverse
free
Arrma spoiler.com by Noah152
...arrma spoiler.com by noah152
thingiverse
thingiverse
free
Arrma Bodysafe by Basuu
... by basuu
thingiverse
to protect your body from damage. developed by 23 mp. fits for arrma kraton, outcast/notorious, talion 6s.
Spoiler
turbosquid
$20
Spoiler
...e 3d model spoiler for download as ma, max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1369554)
turbosquid
$15
Spoiler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
spoiler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Spoiler 3D Model
...spoiler 3d model
3dexport
car spoiler sport parts aerodynamic fast speed
spoiler 3d model misha13i 1745 3dexport
3d_export
$99
F30 spoiler of the trunk
...f30 spoiler of the trunk
3dexport
the spoiler is based on original scanned car.
turbosquid
$3
Double Wing Spoiler
...royalty free 3d model double wing spoiler for download as obj on turbosquid: 3d models for games, architecture, videos. (1252381)
3d_export
$15
Concept Spoiler 3D Model
...concept spoiler 3d model
3dexport
concept spoiler 3d model tygrys 66370 3dexport
turbosquid
$12
Car \ Truck Spoiler
...el amazing new spoiler for rc car or toy car for download as on turbosquid: 3d models for games, architecture, videos. (1340729)
turbosquid
$15
DD Spoiler 1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
DD Spoiler 1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Granite
3d_ocean
$19
Dual Materials - Granite - S01 - Polished Granite
...1 – polished granite description: here i present you with granite – s01 – polished granite surfaces dual materials library for...
3ddd
$1
BNOS / Granite
...m , кресло
комплект мягкой мебели серии granite фирмы bnos. подробнее на www.bnos.com.ua
3d_export
$10
granitic pottery
...final scene is rendered in 4d cinema. use of granitetype nodal materials. all versions are available, c4d, sldprt, obj,...
turbosquid
$9
Granite Table
...squid
royalty free 3d model granite table for download as ma on turbosquid: 3d models for games, architecture, videos. (1687267)
turbosquid
free
Stone granite
...quid
royalty free 3d model stone granite for download as max on turbosquid: 3d models for games, architecture, videos. (1661595)
3d_ocean
$3
Realistic Granite Wall
...ocean
granite realistic tileable wall
realistic granite wall with good detalization and resolution (4096×4096) perfectly tileable
turbosquid
$3
Granite Pillar
...ree 3d model granite pillar for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1455968)
turbosquid
free
Granite rock
... free 3d model granite rock for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1210685)
turbosquid
$18
Granite fountain
...model granite fountain for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1291216)
turbosquid
$4
Dark Granite
...d model dark granite for download as blend, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1591562)