Thingiverse
Anycubic Mega Pro - Cable Holder by daedalas1981
by Thingiverse
Last crawled date: 3 years, 3 months ago
CREATED for the ANYCUBIC MEGA PRO version equipped with a LASER.
This cable support was originally created by Alex100dre for the Anycubic i3 Mega.
Prevents the cable from over flexing and pulling out of the connector during a print.
Modified from the Original:
Cutout so that the laser can sit flush on the print head.
Left side of the cable holder now flat for easier install and removal of the Assisted Bed Level Sensor.
This cable support was originally created by Alex100dre for the Anycubic i3 Mega.
Prevents the cable from over flexing and pulling out of the connector during a print.
Modified from the Original:
Cutout so that the laser can sit flush on the print head.
Left side of the cable holder now flat for easier install and removal of the Assisted Bed Level Sensor.
Similar models
thingiverse
free
Anycubic I3 Mega Cable Holder by FredLegault
...y work for anycubic i3 mega with the ultrabase. the hole pattern and connector clearance is different from the original i3 mega.
thingiverse
free
CABLE HOLDER FOR TITAN EXTRUDER ANYCUBIC MEGA by 11JE11
...1
thingiverse
cable holder for anycubic titan extruder. protects the cable connection from movement
print it laying on the side
thingiverse
free
Cable Holder Mandalorian Style Anycubic i3 Mega Remixed
...ian style anycubic i3 mega remixed
thingiverse
remix from anycubic i3 mega (2018) cable holder by lucas_f
mandalorian style !
thingiverse
free
Anycubic i3 Mega top extruder mount
...o mount the extruder on the top of a anycubic i3 mega with the original extruder holder,
you`ll need to extend the extruder cable
thingiverse
free
Anycubic i3 Mega Extruder Motor Cable Holder by tom666
...anycubic i3 mega extruder motor cable holder by tom666
thingiverse
printed from abs.
thingiverse
free
Anycubic Mega Hotend Cable Guide by IJK_CZ
... anycubic mega /mega s. easy to print and use. it prevents cable and bowden contact with ramp, when the printed thing is higher.
thingiverse
free
Cable holder Anycubic I3Mega / Mega S by Anycubic2806
...cable holder anycubic i3mega / mega s by anycubic2806
thingiverse
cable holder for anycubic i3 mega / i3 mega s.
thingiverse
free
Cable holder
...cable holder
thingiverse
cable holder for anycubic i3 mega, mega-s
thingiverse
free
Anycubic Mega Cable Holder right Base by 11JE11
...er for anycubic mega series. cable holder for the right sided base
this protects the cables. there is less strain on the cables.
thingiverse
free
Anycubic Mega Hotend Cable Holder by MG3DeSign
...older by mg3design
thingiverse
hotend cable holder for anycubic mega
tested on mega-s
please comment if it also fits a i3 mega
Daedalas1981
thingiverse
free
Coat Hanger for Closet Bifold Doors by daedalas1981
...r bifold closet doors.
no supports or rafts needed.
50% infill was strong enough for our needs with a 0.2mm resolution using pla
thingiverse
free
Necklace Chain Remix by daedalas1981
... the neck by adding a second clasp. this is my remix with two clasps based on flymike's original design.
thanks for looking!
thingiverse
free
Holga 120 CFN Release Cable Adapter by daedalas1981
...s mounted a tad lower it may work 100%. but i'll leave that for another day.
fusion
if you want the fusion360 .f3m hit me up.
thingiverse
free
RobotDyn 4x4 KeyPad Breakout Single Encoder by daedalas1981
...encoder version
daedalas1981 github project files
nicohood's hid-project library
robotdyn 4x4 keypad
amazon - rotary encoders
thingiverse
free
RobotDyn 4x4 KeyPad Breakout Dual Encoder by daedalas1981
...ncorder version
daedalas1981 github project files
nicohood's hid-project library
robotdyn 4x4 keypad
amazon - rotary encoders
thingiverse
free
British Columbia ( BC) EV Decal Frame by daedalas1981
... side of the sticker base which has the magnets. this should stop the pla and magnets from having direct contact with your paint.
Mega
thingiverse
free
Anycubic i3 mega direct Titan Aero by Kyneq
...om the project https://www.thingiverse.com/thing:4361102
mount bltouch from the project https://www.thingiverse.com/thing:3065506
thingiverse
free
Plotter attachment for Anycubic i3 Mega by ThomasKole
...adapter onto the print head's left screw.
you can use inkscape to turn svg's into gcode, what's what i use.
have fun!
thingiverse
free
Anycubic Mega Zero Control Box extension for Heated Bed Mosfet and Octoprint Pi by rixxka2000
...cy is not spot on
you will need 4x m3 40mm screws to attach base through to original top cover.
any questions please ask
thanks
thingiverse
free
Anycubic I3 Mega Filament Guide Bracked Remix by Desmoair
...is a remix of the bracked from the remix of the ender 3 filament guide. the bracket was designed to mount on an anycubic i3 mega.
thingiverse
free
AI3M threaded spindle z-axis leading / Trapezspindelhalter by Schmelzerboy
.../ trapezspindelhalter by schmelzerboy thingiverse trapezspindelhalter für anycubic i3 mega mit rillenkugellager typ 608 2rs c3 this files are...
thingiverse
free
A cutted version of max7th great Mark3 Design by DannyEss87
...with a smaller 3d printer, like the anycubic i3 mega the basic model is from...
thingiverse
free
Anycubic Mega S - Display-Cover - Hexagon-Style by CitizenZ
...anycubic mega s - display-cover - hexagon-style by citizenz
thingiverse
no special settings.
printed with pla.
thingiverse
free
Anycubic Mega Zero fun 4020 by Kostiabu
...anycubic mega zero fun 4020 by kostiabu
thingiverse
printed with a 0.8 mm nozzle. layer height 0.4 mm, line width 0.7 mm
thingiverse
free
Anycubic mega tool holder by notaviolin
...style and needs. it mounts to the right upper corner of my anycubic printer so it allows for easy access for right handed makers.
Anycubic
thingiverse
free
Anycubic i3 mega direct Titan Aero by Kyneq
...om the project https://www.thingiverse.com/thing:4361102
mount bltouch from the project https://www.thingiverse.com/thing:3065506
thingiverse
free
Anycubic Chiron线缆改装 by WuM
...ic chiron原装线缆特别容易损坏且不美观,新的设计增大了线缆的回转角度,线缆也换成了专用的拖链线缆以避免损坏,拖在地上的线也变得整齐了。因为原装线缆比较短,该设计最麻烦的地方就是需要自己做线,一共有3种端子(phb、ph-t、xh)嫌麻烦可以直接焊接。
thingiverse
free
Plotter attachment for Anycubic i3 Mega by ThomasKole
...adapter onto the print head's left screw.
you can use inkscape to turn svg's into gcode, what's what i use.
have fun!
thingiverse
free
Anycubic Mega Zero Control Box extension for Heated Bed Mosfet and Octoprint Pi by rixxka2000
...cy is not spot on
you will need 4x m3 40mm screws to attach base through to original top cover.
any questions please ask
thanks
thingiverse
free
Anycubic I3 Mega Filament Guide Bracked Remix by Desmoair
...is a remix of the bracked from the remix of the ender 3 filament guide. the bracket was designed to mount on an anycubic i3 mega.
thingiverse
free
Small Ball Mounting System (i.a. for CAMs like Pi, C270, GoPro) by wolwin_de
...c270/c310 focus ringhttps://www.thingiverse.com/thing:3750229 object connections for the 3d printer anycubic i3m two clip holders were added for the left/right...
thingiverse
free
Delta Corner Braces by 3dmpro
...3dmpro thingiverse inspired by the frame extension of the anycubic kossel linear, i developed an easy to print corner...
thingiverse
free
AI3M threaded spindle z-axis leading / Trapezspindelhalter by Schmelzerboy
...z-axis leading / trapezspindelhalter by schmelzerboy thingiverse trapezspindelhalter für anycubic i3 mega mit rillenkugellager typ 608 2rs c3 this...
thingiverse
free
A cutted version of max7th great Mark3 Design by DannyEss87
...to print with a smaller 3d printer, like the anycubic i3 mega. the basic model is from...
Pro
thingiverse
free
Magsafe Brodit adapter iPhone 12 / Pro / Pro Max with extra phone support by bjorntm
...2 pro i took a thickness of 2mm, so the total width of the phone incl. the case should be 82.1mm. please measure before printing.
thingiverse
free
Repair impeller for fan 40x40 Ender 3 Pro by Fracksinys
...blades on the impeller, then grind off any irregularities left after removing the blades, insert the rotor into the new impeller.
thingiverse
free
Spool Holder for Creator Pro by ItsDeCia
...ed to prevent the spool from falling off and the spool holder provides a simple, minimalist design that gets the job done.
enjoy!
thingiverse
free
Vixen GP Goto Conversion Using Meade DS Motors by wt808
...three m3 nuts, and reinstall the ring in the proer orientation again. press a mf85zz bearing into the recess...
thingiverse
free
Ender 3 Dimmer Switch Mod by polkastress
...and requires no mounting hardware. tested on ender 3 pro you will need: 1x potentiometer with switch. i used...
thingiverse
free
Bed Corner Spacer for Ender 3 PRO by LachyD5959
...iverse
this is a bed spacer for the ender 3 pro. it can go either under or above the original part named cablechain_bedcorner_v2
thingiverse
free
MYNT3D Pro Stand by CinemaTechnica
...ent, pla is probably okay, but i'd stay away from black because it absorbs heat.
check out my website, www.cinematechnica.com
thingiverse
free
Ender 5 Tool Box (Remixed for cable ties and scraper attachment) by 03togodwin
...stored. i have printed this on my ender 5 pro it is a fanastic small organiser too keep tools...
thingiverse
free
TrackIR TrackClip PRO Battery Compartment Headphones Clip by falken_gt4
...der the red wire to the leds to the other terminal on the switch.
4) make sure to insulate properly, i used heat shrink sleeving.
Cable
thingiverse
free
Quiet control box for SKR 1.4 + cable mgmt layer. by Evilkoal
...thing into the electronics of the power supply.
let me know if anything is weird, but i haven't noticed anything not fitting.
thingiverse
free
Extension Cord Cable Mount Clip by max_davis
...x_davis
thingiverse
cable mount that fits a standard extension cord cable (up to 9mm). just use two screws or nails to mount it.
thingiverse
free
IKEA Skadis Mount for Nest / Google Home Hub by garethps
...to the board as possible, so i designed the cable pass-through to line up with one of the skadis'...
thingiverse
free
Oculus Quest halo strap cable clips by njozsef
...ozsef
thingiverse
thank you gyozamonstah and mysteroius (thing: 3909976).
simple cable clip for oculus-link or external battery.
thingiverse
free
Blink Mini Security Camera Outdoor Enclosure by krisstewart
...moisture. --installing-- once you plug in the micro usb cable and slide the camera in (i bought a 10...
thingiverse
free
Living Bticino compatible series - RJ45 network socket - Blank cover - Pass cable by Donald_
...blank cover - pass cable by donald_
thingiverse
living bticino compatible series:
rj45 network socket - blank cover - pass cable
thingiverse
free
USB-C Powerbank with 18W fast charging by LivingroomWorkbench
...or a soldering iron to solder the wires some cable to connect the batteries soldering iron to solder the...
thingiverse
free
Anycubic i3 mega direct Titan Aero by Kyneq
...make corrections to the model. plastic chain holder for cable fits 10x10 version. i added a chain mount for...
thingiverse
free
Soporte cable HDD by Polgol
...polgol
thingiverse
este es mi diseño para asegurar el cable de un disco duro.
this is my design for securing a hard drive cable.
thingiverse
free
Case transport Mobula 6 by yotta72
...propellers (under the drone) and a hole for lipos, cable, ...
Holder
thingiverse
free
Concordia and Britannia & Germania expansion boardgame insert by MitutoyoRaytek
...ones, thicker ones might not fit into the card holder. all the containers have lids which allows the game...
thingiverse
free
Dental Stick Holder by andimoto
...lder by andimoto
thingiverse
holder for interdental brushes and something other which fit into the cutout.
scad model available.
thingiverse
free
Supports extensibles - Expandables holders - Logitech Universal Folio by FRTophu
...for the case/keyboard logitech universal folio redesigned for a better fit with 10 inchs tablets (in my case, a lenovo tab m10+).
thingiverse
free
A10, A10M, A10T, A20, A20M Tool Holder by BellOnWheels
...sized the wrench slots
i presume this will also fit other axx printers, allowing, of course, for the three extruders on the a10t.
thingiverse
free
MAGIC THE GATHERING ADVENT CALENDAR by brimstone326
...cards can be crammed into one of these card holder.... so there may be hope for sleeves. you will...
thingiverse
free
Coin holder for 1 euro coin by robengineering
...is keys.
advantage:
easy to print
easy to remove printing support
lightweight
little filament used
small volume
simplistic design
thingiverse
free
Caldwell Balistic Precision holder by E-MEN
...alistic precision halter
passt für samsung s20 und samsung s9+
thanks for support/danke für unterstützung : paypal.me/wiederladen
thingiverse
free
Cree bike light holder front fork by Mslu
...cree bike light holder front fork by mslu
thingiverse
bike light holder for the chinese cree bike lights.
the hole is size m6.
thingiverse
free
Phone Holder for Tiguan Card Holder. by DiscoveryTr
...phone holder for tiguan card holder. by discoverytr
thingiverse
phone holder for tiguan card holder.
thingiverse
free
Pegboard Nutella jar holder / Soporte frasco Nutella para placa perforada by matiasdenker
...icio de 4mm de diametro en el cuello del frasco para que un pequeño perno impreso en la misma pieza se meta levemente. ver fotos.