AI-Unit 30 - replacement of cyclones (Аппарат АИ-30) 3d model
3dmdb logo
GrabCAD
AI-Unit 30 - replacement of cyclones (Аппарат АИ-30)

AI-Unit 30 - replacement of cyclones (Аппарат АИ-30)

by GrabCAD
Last crawled date: 1 year, 11 months ago
AI-Unit 30 (Аппарат АИ-30)
Effective capture of the inertial apparatus-replacement of cyclones

An inertial device capture fine particles of dust and gas flow has internal gas-permeable surface with developed structure of the collection, which accentuate the aerodynamic component vector of sedimentation and the actual residence time of particles in the apparatus.
Longer maintenance intervals and low operating costs. Service life not less than 15 years. Can be used in an open area, and industrial premises, as well as the first stage of purification. The effectiveness of 70 ...90%.
The performance of the gas up to 30000 m3/h.
Hydraulic resistance of 350 Pa.
The temperature of the cleaned gases up to 425° С.
Performance of the OHR-1-1800-200-160 up to 10 m3/h.
Wheel drive motor-reducer PFM-40-35, 5-1, 1-G310-TS-Y3, work continued. Motor power-1.1 kW.
Material handling in chute not more 12:0 am weight 2000 ± 500 kg (depends on operating loads and the properties of the dusts dispersed mass).
Metal pedestal and supports conventionally not shown. Thermal insulation, if necessary, a separate calculation and project. Reservoir installation option is selected on the properties of the dust and gas flow and dispersion of mass.
Metal pedestal and supports conventionally not shown.
Thermal insulation, if necessary, a separate calculation and project. Reservoir installation option is selected on the properties of the dust and gas flow and dispersion of mass. At customer's request, a system for monitoring the concentration of dust at the inlet and outlet gas analysers of harmful substances, the automatic regeneration control and caught suspensions.

Эффективный аппарат инерционного улавливания - замена циклонов!
Аппарат инерционного улавливания мелкодисперсных взвесей из пылегазового потока имеет внутренние газопроницаемые осадительные поверхности с развитой структурой, усиливающей аэродинамическую составляющую вектора седиментации и реальное время пребывания частиц в аппарате.
Повышенный срок межремонтного пробега при низких эксплуатационных затратах. Срок службы не менее 15 лет.
Может применяться на открытой площадке и в производственных помещениях как самостоятельно, так и в качестве первой ступени очистки. Эффективность 70…90%.
Производительность по газу до 30 000 м3/ч.
Гидравлическое сопротивление 350 Па.
Температура очищаемых газов до 425 °С.
Производительность УВП-1-1800-200-160 до 10.7 м3/ч.
Привод - мотор-редуктор ЗМП-40-35,5-1,1-G310-Ц-У3, режим работы - непрерывный.
Мощность электропривода - 1,1 кВт.
Хранение материала в желобе не более 24 ч.
Масса аппарата 2000 ± 500 кг (зависит от действующих нагрузок и свойств улавливаемой дисперсной массы).
Металлический постамент и опоры условно не показаны.
Теплоизоляция выполняется, при необходимости, по отдельному расчёту и проекту.
Вариант установки коллекторов выбирается по свойствам пылегазового потока и дисперсной массы.
По требованию заказчика устанавливается система мониторинга за концентрацией пыли на входе и выходе, газоанализаторы вредных веществ, система автоматического управления регенерацией и выгрузкой уловленных взвесей.

Tags